[PATCH v2 20/25] drm/mediatek: add ovl0/ovl0_2l usecase

[CK Hu]

Hi, Yongqiang:

On Wed, 2019-03-27 at 14:19 +0800, yongqiang.niu at mediatek.com wrote:
> From: Yongqiang Niu <yongqiang.niu at mediatek.com>
> 
> This patch add ovl0/ovl0_2l usecase
> in ovl->ovl0_2l direct link usecase:
> 1. the crtc support layer number will 4+2
> 2. ovl0_2l background color input select ovl0 when crtc init
> and disable it when crtc finish
> 3. config ovl0_2l layer, if crtc config layer number is
> bigger than ovl0 support layers(max is 4)
> 
> Signed-off-by: Yongqiang Niu <yongqiang.niu at mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 38 +++++++++++++++++++++++++++++++--
>  1 file changed, 36 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> index 11e3404..0f97ee3 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> @@ -283,6 +283,13 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
>  
>  	for (i = 0; i < mtk_crtc->ddp_comp_nr; i++) {
>  		struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[i];
> +		enum mtk_ddp_comp_id prev;
> +
> +		if (i > 0)
> +			prev = mtk_crtc->ddp_comp[i - 1]->id;
> +		else
> +			prev = DDP_COMPONENT_ID_MAX;
> +		mtk_ddp_comp_bgclr_in_on(comp, prev);
>  
>  		mtk_ddp_comp_config(comp, width, height, vrefresh, bpc);
>  		mtk_ddp_comp_start(comp);
> @@ -292,9 +299,18 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
>  	for (i = 0; i < mtk_crtc->layer_nr; i++) {
>  		struct drm_plane *plane = &mtk_crtc->planes[i];
>  		struct mtk_plane_state *plane_state;
> +		struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
> +		unsigned int comp_layer_nr = mtk_ddp_comp_layer_nr(comp);
> +		unsigned int local_layer;
>  
>  		plane_state = to_mtk_plane_state(plane->state);
> -		mtk_ddp_comp_layer_config(mtk_crtc->ddp_comp[0], i,
> +
> +		if (i >= comp_layer_nr) {
> +			comp = mtk_crtc->ddp_comp[1];
> +			local_layer = i - comp_layer_nr;
> +                } else
> +			local_layer = i;
> +		mtk_ddp_comp_layer_config(comp , local_layer,
>  					  plane_state);
>  	}
>  
> @@ -320,6 +336,7 @@ static void mtk_crtc_ddp_hw_fini(struct mtk_drm_crtc *mtk_crtc)
>  					   mtk_crtc->ddp_comp[i]->id);
>  	mtk_disp_mutex_disable(mtk_crtc->mutex);
>  	for (i = 0; i < mtk_crtc->ddp_comp_nr - 1; i++) {
> +		mtk_ddp_comp_bgclr_in_off(mtk_crtc->ddp_comp[i]);
>  		mtk_ddp_remove_comp_from_path(mtk_crtc->config_regs,
>  					      mtk_crtc->mmsys_reg_data,
>  					      mtk_crtc->ddp_comp[i]->id,
> @@ -340,6 +357,8 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
>  	struct mtk_crtc_state *state = to_mtk_crtc_state(mtk_crtc->base.state);
>  	struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
>  	unsigned int i;
> +	unsigned int comp_layer_nr = mtk_ddp_comp_layer_nr(comp);
> +	unsigned int local_layer;
>  
>  	/*
>  	 * TODO: instead of updating the registers here, we should prepare
> @@ -362,7 +381,14 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
>  			plane_state = to_mtk_plane_state(plane->state);
>  
>  			if (plane_state->pending.config) {
> -				mtk_ddp_comp_layer_config(comp, i, plane_state);
> +				if (i >= comp_layer_nr) {
> +					comp = mtk_crtc->ddp_comp[1];
> +					local_layer = i - comp_layer_nr;
> +                                } else
> +					local_layer = i;
> +
> +				mtk_ddp_comp_layer_config(comp, local_layer,
> +							  plane_state);
>  				plane_state->pending.config = false;
>  			}
>  		}
> @@ -604,6 +630,14 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
>  	}
>  
>  	mtk_crtc->layer_nr = mtk_ddp_comp_layer_nr(mtk_crtc->ddp_comp[0]);
> +        if (mtk_crtc->ddp_comp_nr > 1) {
> +		struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[1];
> +		enum mtk_ddp_comp_type comp_type;
> +
> +		comp_type = mtk_ddp_comp_get_type(comp->id);
> +		if (comp_type == MTK_DISP_OVL || comp_type == MTK_DISP_OVL_2L)

I think you need not to invent the function mtk_ddp_comp_get_type() to
get the type. Only the component implementing bgclr_in_on() has the
ability to the extend the ovl layer, so you could judge bgclr_in_on()
exist or not to extend the ovl layer.

Regards,
CK

> +			mtk_crtc->layer_nr += mtk_ddp_comp_layer_nr(comp);
> +        }
>  	mtk_crtc->planes = devm_kcalloc(dev, mtk_crtc->layer_nr,
>  					sizeof(struct drm_plane),
>  					GFP_KERNEL);