[PATCH v2 18/25] drm/mediatek: add RDMA fifo size error handle

[YT Shen]

On Tue, 2019-04-16 at 16:37 +0800, Yongqiang Niu wrote:
> On Tue, 2019-04-16 at 16:00 +0800, CK Hu wrote:
> > Hi, Yongqiang:
> > 
> > On Wed, 2019-03-27 at 14:19 +0800, yongqiang.niu at mediatek.com wrote:
> > > From: Yongqiang Niu <yongqiang.niu at mediatek.com>
> > > 
> > > This patch add RDMA fifo size error handle
> > > rdma fifo size will not always bigger than the calculated threshold
> > > if that case happened, we need set fifo size as the threshold
> > > 
> > > Signed-off-by: Yongqiang Niu <yongqiang.niu at mediatek.com>
> > > ---
> > >  drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 9 ++++++++-
> > >  1 file changed, 8 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> > > index b0a5cff..ead38ba 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> > > @@ -137,11 +137,14 @@ static void mtk_rdma_config(struct mtk_ddp_comp *comp, unsigned int width,
> > >  {
> > >  	unsigned int threshold;
> > >  	unsigned int reg;
> > > +	unsigned int rdma_fifo_size;
> > >  	struct mtk_disp_rdma *rdma = comp_to_rdma(comp);
> > >  
> > >  	rdma_update_bits(comp, DISP_REG_RDMA_SIZE_CON_0, 0xfff, width);
> > >  	rdma_update_bits(comp, DISP_REG_RDMA_SIZE_CON_1, 0xfffff, height);
> > >  
> > > +	rdma_fifo_size = RDMA_FIFO_SIZE(rdma);
> > > +
> > >  	/*
> > >  	 * Enable FIFO underflow since DSI and DPI can't be blocked.
> > >  	 * Keep the FIFO pseudo size reset default of 8 KiB. Set the
> > > @@ -149,8 +152,12 @@ static void mtk_rdma_config(struct mtk_ddp_comp *comp, unsigned int width,
> > >  	 * account for blanking, and with a pixel depth of 4 bytes:
> > >  	 */
> > >  	threshold = width * height * vrefresh * 4 * 7 / 1000000;
> > > +
> > > +	if (threshold > rdma_fifo_size)
> > > +		threshold = rdma_fifo_size;
> > 
> > I think this is a work around not a correct solution. Why MT8173 has no
> > this problem but MT8183 has? Is the formula of threshold different in
> > MT8173 and MT8183?
> > 
> > Regards,
> > CK
> > 
> 
> fifo size of RDMA0 and RDMA1 in MT8173 are same, which is SZ_8K.
> this formula calculate result will not overflow if the screen size is
> not big enough. 
> 
> but fifo size of RDMA1 in MT8183 only SZ_2K, if RDMA1 display with
> solution 1080p60hz, this formula calculate result 3483 will overflow
> SZ_2K. 
RDMA1 with SZ_2K can support up to 1080p60hz, even the formula shows
overflow, is it correct?

The formula shows all resolution something more than 1280x1080 at 60hz will
overflow SZ_2K, and in this patch all set to maximum value.

The patch should implement different FIFO size depends on RDMA0
(SZ_5K)and RDMA1 (SZ_2K), and use the value from the formula.

Regards,
yt.shen

> 
> > > +
> > >  	reg = RDMA_FIFO_UNDERFLOW_EN |
> > > -	      RDMA_FIFO_PSEUDO_SIZE(RDMA_FIFO_SIZE(rdma)) |
> > > +	      RDMA_FIFO_PSEUDO_SIZE(rdma_fifo_size) |
> > >  	      RDMA_OUTPUT_VALID_FIFO_THRESHOLD(threshold);
> > >  	writel(reg, comp->regs + DISP_REG_RDMA_FIFO_CON);
> > >  }
> > 
> > 
> 
>