[PATCH v2 2/9] dt-bindings: display: Add bindings for Advantech IDK-2121WR

Fabrizio Castro fabrizio.castro at bp.renesas.com
Thu Aug 15 13:38:35 UTC 2019


Hi Laurent,

Thank you for your feedback!

> From: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Sent: 15 August 2019 12:47
> Subject: Re: [PATCH v2 2/9] dt-bindings: display: Add bindings for Advantech IDK-2121WR
> 
> Hi Fabrizio,
> 
> On Thu, Aug 15, 2019 at 12:04:26PM +0100, Fabrizio Castro wrote:
> > This panel is handled through the generic lvds-panel bindings,
> > so only needs its additional compatible specified.
> >
> > Some panel-specific documentation can be found here:
> > https://buy.advantech.eu/Displays/Embedded-LCD-Kits-High-Brightness/model-IDK-2121WR-K2FHA2E.htm
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro at bp.renesas.com>
> >
> > ---
> > v1->v2:
> > * Reworked according to Laurent's feedback
> > * Renamed lvds0_panel_in to panel_in0
> > * Renamed lvds1_panel_in to panel_in1
> >
> > Laurent,
> >
> > Should this be a .yaml file already?
> 
> It's not a strict requirement, but I'm sure Rob would really appreciate.
> I've converted a DT binding to yaml recently (for a panel too), and I
> have to say I'm impressed by the validation yaml brings, both for DT
> sources and for DT bindings. It even validates the example in the
> bindings, which is great. Documentation/devicetree/writing-schema.md
> should give you a few pointers to get started (in particular make sure
> you run make dt_binding_check for your new bindings).

Will give this a try.

Thanks,
Fab

> 
> >  .../display/panel/advantech,idk-2121wr.txt         | 56 ++++++++++++++++++++++
> >  1 file changed, 56 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt
> >
> > diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt
> b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt
> > new file mode 100644
> > index 0000000..6ee1d1b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt
> > @@ -0,0 +1,56 @@
> > +Advantech Co., Ltd. IDK-2121WR 21.5" LVDS panel
> > +===============================================
> > +
> > +Required properties:
> > +- compatible: should be "advantech,idk-2121wr" followed by "panel-lvds"
> > +
> > +This binding is compatible with the lvds-panel binding, which is specified
> > +in panel-lvds.txt in this directory.
> > +The panel operates in dual-link mode and thus requires two port nodes,
> > +the first port node expects odd pixels (1, 3, 5, etc.) and the second port
> > +expects even pixels (0, 2, 4, etc.).
> > +
> > +Example
> > +-------
> > +
> > +	panel {
> > +		compatible = "advantech,idk-2121wr", "panel-lvds";
> > +
> > +		width-mm = <476>;
> > +		height-mm = <268>;
> > +
> > +		data-mapping = "vesa-24";
> > +
> > +		panel-timing {
> > +			clock-frequency = <148500000>;
> > +			hactive = <1920>;
> > +			vactive = <1080>;
> > +			hsync-len = <44>;
> > +			hfront-porch = <88>;
> > +			hback-porch = <148>;
> > +			vfront-porch = <4>;
> > +			vback-porch = <36>;
> > +			vsync-len = <5>;
> > +		};
> > +
> > +		ports {
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +
> > +			port at 0 {
> > +				/* Odd pixels */
> > +				reg = <0>;
> > +				panel_in0: endpoint {
> > +					remote-endpoint = <&lvds0_out>;
> > +				};
> > +			};
> > +
> > +			port at 1 {
> > +				/* Even pixels */
> > +				reg = <1>;
> > +				panel_in1: endpoint {
> > +					remote-endpoint = <&lvds1_out>;
> > +				};
> > +			};
> > +		};
> > +	};
> > --
> > 2.7.4
> >
> 
> --
> Regards,
> 
> Laurent Pinchart


More information about the dri-devel mailing list