[PATCH v3 10/10] [HACK] arm64: dts: renesas: ebisu: Enable LVDS dual-link operation
Jacopo Mondi
jacopo at jmondi.org
Tue Jul 23 10:30:24 UTC 2019
HI Fabrizio,
On Mon, Jul 22, 2019 at 11:27:26AM +0000, Fabrizio Castro wrote:
> Hello Jacopo,
>
> > From: linux-renesas-soc-owner at vger.kernel.org <linux-renesas-soc-owner at vger.kernel.org> On Behalf Of Laurent Pinchart
> > Sent: 28 May 2019 15:13
> > Subject: [PATCH v3 10/10] [HACK] arm64: dts: renesas: ebisu: Enable LVDS dual-link operation
> >
> > Enable and connect the second LVDS encoder to the second LVDS input of
> > the THC63LVD1024 for dual-link LVDS operation. This requires changing
> > the default settings of SW45 and SW47 to OFF and ON respectively.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> > Tested-by: Jacopo Mondi <jacopo+renesas at jmondi.org>
>
> How did you test this patch on Ebisu (kernel branch, configuration, switches,etc.)?
>
I tested the branch provided by Laurent and mentioned in this cover
letter.
The branch is now rebased on v5.2-rc1 as you can see, I cannot tell at
the time which one was the release tag on which it was based on, but I
suspect 5.0 or either v4.20. Maye Laurent remembers it.
> I tested both linux-next and drm/du/lvds/dual-link and they are not working for me.
> The base configuration I am using is coming from arch/arm64/configs/defconfig from each respective branch, on top of that I am enabling the remaining bits and pieces.
> I have tried the suggested configuration of the switches for this patch, basically nothing is happening. I have also tried reverting the changes made by this patch (on both branches), and of course I have reverted the selection for the switches as well, and even single-link doesn't work for me. Single-link support from the BSP version of the kernel (4.14.75-ltsi) works for me, that confirms the configuration of the switches I am using when testing single-link should be okay.
>
> If, in the single-link use case from drm/du/lvds/dual-link, I connect lvds1 to the vga-encoder in the DT (like for the BSP DT, but I can see from the schematics that ADV7123 is actually connected to DU, like the configuration in the DT upstream), then HDMI works as expected (most of the time).
>
> I wonder if for some reason we may end up using the wrong lvds encoder at times, or no encoder at all?
>
> Have you seen this problem? Am I missing something obvious here?
The branch I tested at the time worked out the box, but now, I see
several different problems, and this morning I ran severl tests. Here
it is a summary:
Laurent's drm/du/lvds/dual-link and drm/du/next are v5.2-rc1 based.
I see an error which makes Ebisu fail to boot on those branches and
plain v5.2 (both -rc1 and final v5.2)
The issue is related to bd9571 which seems to be an MFD gpio expander:
[ 2.748694] bd9571mwv 8-0030: Device: BD9571MWV rev. 4
[ 28.754865] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[ 28.761094] rcu: 1-...0: (2 ticks this GP) idle=352/1/0x4000000000000000 softirq=45/46 fqs=3250
sometimes it even fail when detecting the chip:
i2c-sh_mobile e60b0000.i2c: Transfer request timed out │
bd9571mwv 8-0030: Failed to read vendor code register (ret=-110)
I managed to boot the board once with no error, so I wonder if it is
not my board which has issues?
Anyway, this seems unrelated to the lvds dual link mode, but prevents
me from testing anything on v5.2. I wonder if you ever seen anything similar...
So I went and tested v5.1. Plain v5.1 with SW45 and SW47 in their
'default' position gives me a working output with single mode.
I then cherry-picked the patches from Laurent's drm/du/lvds/dual-link
and applied on top of v5.1 and it seems like DU does not get probed
there.
To be sure I was testing the same patches I tested at the time I gave
my tag to this series I manually applied the patches from this series
(not the one in Laurent's tree, but the ones here sent) on top of v5.1
and I got the same result, DU was not probed correctly.
I had a look at diff in the encoder registration process between 5.0 and
5.2 and I don't see much differences, so I suspect it might be some
config option I have missed as well?
Could you be a bit more precise on which tools are you using for
testing and which failures you see? Are those the same I see here?
I'm testing using kms-tests or kmsxx alternatively, and made sure the
DU driver was loaded (or not) with modeprint from drm's modetest
suite. Basically, everything is mentioned here:
uttps://elinux.org/R-Car/Devices#DU
I could start reporting the v5.2 failure on Ebisu if you confirm me
you see the same on your side, then trying to get to the bottom of the
DU/lvds issue.
Thanks
j
>
> Thanks,
> Fab
>
> > ---
> > .../arm64/boot/dts/renesas/r8a77990-ebisu.dts | 24 +++++++++++++------
> > 1 file changed, 17 insertions(+), 7 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
> > index c72772589953..988d82609f41 100644
> > --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
> > +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
> > @@ -93,11 +93,18 @@
> >
> > port at 0 {
> > reg = <0>;
> > - thc63lvd1024_in: endpoint {
> > + thc63lvd1024_in0: endpoint {
> > remote-endpoint = <&lvds0_out>;
> > };
> > };
> >
> > + port at 1 {
> > + reg = <1>;
> > + thc63lvd1024_in1: endpoint {
> > + remote-endpoint = <&lvds1_out>;
> > + };
> > + };
> > +
> > port at 2 {
> > reg = <2>;
> > thc63lvd1024_out: endpoint {
> > @@ -482,24 +489,27 @@
> > ports {
> > port at 1 {
> > lvds0_out: endpoint {
> > - remote-endpoint = <&thc63lvd1024_in>;
> > + remote-endpoint = <&thc63lvd1024_in0>;
> > };
> > };
> > };
> > };
> >
> > &lvds1 {
> > - /*
> > - * Even though the LVDS1 output is not connected, the encoder must be
> > - * enabled to supply a pixel clock to the DU for the DPAD output when
> > - * LVDS0 is in use.
> > - */
> > status = "okay";
> >
> > clocks = <&cpg CPG_MOD 727>,
> > <&x13_clk>,
> > <&extal_clk>;
> > clock-names = "fck", "dclkin.0", "extal";
> > +
> > + ports {
> > + port at 1 {
> > + lvds1_out: endpoint {
> > + remote-endpoint = <&thc63lvd1024_in1>;
> > + };
> > + };
> > + };
> > };
> >
> > &ohci0 {
> > --
> > Regards,
> >
> > Laurent Pinchart
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20190723/bc6d317a/attachment.sig>
More information about the dri-devel
mailing list