[PATCH] drm/i915/dsi: Use a fuzzy check for burst mode clock check

[Hans de Goede]

Prior to this commit we fail to init the DSI panel on the GPD MicroPC:
https://www.indiegogo.com/projects/gpd-micropc-6-inch-handheld-industry-laptop#/

The problem is intel_dsi_vbt_init() failing with the following error:
*ERROR* Burst mode freq is less than computed

The pclk in the VBT panel modeline is 70000, together with 24 bpp and
4 lines this results in a bitrate value of 70000 * 24 / 4 = 420000.
But the target_burst_mode_freq in the VBT is 418000.

This commit works around this problem by adding an intel_fuzzy_clock_check
when target_burst_mode_freq < bitrate and setting target_burst_mode_freq to
bitrate when that checks succeeds, fixing the panel not working.

Cc: stable at vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/gpu/drm/i915/intel_dsi_vbt.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c
index 022bf59418df..a2a9b9d0eeaa 100644
--- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
@@ -895,6 +895,17 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
 		if (mipi_config->target_burst_mode_freq) {
 			u32 bitrate = intel_dsi_bitrate(intel_dsi);
 
+			/*
+			 * Sometimes the VBT contains a slightly lower clock,
+			 * then the bitrate we have calculated, in this case
+			 * just replace it with the calculated bitrate.
+			 */
+			if (mipi_config->target_burst_mode_freq < bitrate &&
+			    intel_fuzzy_clock_check(
+					mipi_config->target_burst_mode_freq,
+					bitrate))
+				mipi_config->target_burst_mode_freq = bitrate;
+
 			if (mipi_config->target_burst_mode_freq < bitrate) {
 				DRM_ERROR("Burst mode freq is less than computed\n");
 				return false;
-- 
2.21.0