[PATCH] drm/i915/dsi: Use a fuzzy check for burst mode clock check

[Hans de Goede]

Hi,

On 5/24/19 3:06 PM, Hans de Goede wrote:
> Prior to this commit we fail to init the DSI panel on the GPD MicroPC:
> https://www.indiegogo.com/projects/gpd-micropc-6-inch-handheld-industry-laptop#/
> 
> The problem is intel_dsi_vbt_init() failing with the following error:
> *ERROR* Burst mode freq is less than computed
> 
> The pclk in the VBT panel modeline is 70000, together with 24 bpp and
> 4 lines this results in a bitrate value of 70000 * 24 / 4 = 420000.
> But the target_burst_mode_freq in the VBT is 418000.
> 
> This commit works around this problem by adding an intel_fuzzy_clock_check
> when target_burst_mode_freq < bitrate and setting target_burst_mode_freq to
> bitrate when that checks succeeds, fixing the panel not working.
> 
> Cc: stable at vger.kernel.org
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>

I just realized that this patch depends on a patch from another series of
mine which exports intel_fuzzy_clock_check, I will resend this as a series
with the patch doing the exporting as first patch, so that the CI can test
this.

Regards,

Hans


> ---
>   drivers/gpu/drm/i915/intel_dsi_vbt.c | 11 +++++++++++
>   1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c
> index 022bf59418df..a2a9b9d0eeaa 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
> +++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
> @@ -895,6 +895,17 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>   		if (mipi_config->target_burst_mode_freq) {
>   			u32 bitrate = intel_dsi_bitrate(intel_dsi);
>   
> +			/*
> +			 * Sometimes the VBT contains a slightly lower clock,
> +			 * then the bitrate we have calculated, in this case
> +			 * just replace it with the calculated bitrate.
> +			 */
> +			if (mipi_config->target_burst_mode_freq < bitrate &&
> +			    intel_fuzzy_clock_check(
> +					mipi_config->target_burst_mode_freq,
> +					bitrate))
> +				mipi_config->target_burst_mode_freq = bitrate;
> +
>   			if (mipi_config->target_burst_mode_freq < bitrate) {
>   				DRM_ERROR("Burst mode freq is less than computed\n");
>   				return false;
>