[PATCH v7 0/5] Support mipitx for mt8183

[Jitao Shi]

Changes since v6:
 - add the mipitx driving control in device tree.
 - config mipitx impedance with calibration data.

Changes since v5:
 - remove mipi_tx->ref_clk
 - remove mt8183 pll prepare unprepare

Changes since v4:
 - fine tune the mipi_tx->ref_clk and mipi_tx->pll sequence
   1. Prepare mipi_tx->ref_clk
   2. Prepare mipi_tx->pll
   3. Enable mipi_tx->ref_clk
   4. Enable mipi_tx->pll

Changes since v3:
 - turn off PLL before setting PLL parameters.

Changes since v2:
 - update Acked-by: Rob Herring <robh at kernel.org>
 - update mt8183 max bit rate support

Changes since v1:
 - update dt-bindings document for mt8183 mipitx.
 - remove mtk_mipitx_clk_get_ops and assign clk_ops in probe.
 - fix the lincence
 - remove txdiv1 from mtk_mipi_tx_pll_prepare

Jitao Shi (5):
  dt-bindings: display: mediatek: update dsi supported chips
  drm/mediatek: separate mipi_tx to different file
  drm/mediatek: add mipi_tx driver for mt8183
  drm/mediatek: add the mipitx driving control in device tree
  drm/mediatek: config mipitx impedance with calibration data

 .../display/mediatek/mediatek,dsi.txt         |  15 +-
 drivers/gpu/drm/mediatek/Makefile             |   2 +
 drivers/gpu/drm/mediatek/mtk_mipi_tx.c        | 344 ++----------------
 drivers/gpu/drm/mediatek/mtk_mipi_tx.h        |  51 +++
 drivers/gpu/drm/mediatek/mtk_mt8173_mipi_tx.c | 289 +++++++++++++++
 drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 220 +++++++++++
 6 files changed, 603 insertions(+), 318 deletions(-)
 create mode 100644 drivers/gpu/drm/mediatek/mtk_mipi_tx.h
 create mode 100644 drivers/gpu/drm/mediatek/mtk_mt8173_mipi_tx.c
 create mode 100644 drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c

-- 
2.21.0