[PATCH v7 1/5] dt-bindings: display: mediatek: update dsi supported chips

[Jitao Shi]

Update device tree binding documentation for the dsi for
Mediatek MT8183 SoCs.

Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
Acked-by: Rob Herring <robh at kernel.org>
---
 .../bindings/display/mediatek/mediatek,dsi.txt    | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index fadf327c7cdf..993ff079ac09 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -7,7 +7,7 @@ channel output.
 
 Required properties:
 - compatible: "mediatek,<chip>-dsi"
-  the supported chips are mt2701 and mt8173.
+  the supported chips are mt2701, mt8173 and mt8183.
 - reg: Physical base address and length of the controller's registers
 - interrupts: The interrupt signal from the function block.
 - clocks: device clocks
@@ -26,22 +26,31 @@ The MIPI TX configuration module controls the MIPI D-PHY.
 
 Required properties:
 - compatible: "mediatek,<chip>-mipi-tx"
-  the supported chips are mt2701 and mt8173.
+  the supported chips are mt2701, mt8173 and mt8183.
 - reg: Physical base address and length of the controller's registers
 - clocks: PLL reference clock
 - clock-output-names: name of the output clock line to the DSI encoder
 - #clock-cells: must be <0>;
 - #phy-cells: must be <0>.
 
+Optional properties:
+- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
+               unspecified default values shall be used.
+- nvmem-cell-names: Should be "calibration-data"
+- mipitx-current-drive: adjust driving current, should be 1 ~ 0xF
+
 Example:
 
 mipi_tx0: mipi-dphy at 10215000 {
 	compatible = "mediatek,mt8173-mipi-tx";
 	reg = <0 0x10215000 0 0x1000>;
 	clocks = <&clk26m>;
-	clock-output-names = "mipi_tx0_pll";
 	#clock-cells = <0>;
 	#phy-cells = <0>;
+	clock-output-names = "mipi_tx0_pll";
+	nvmem-cells= <&mipi_tx_calibration>;
+	nvmem-cell-names = "calibration-data";
+	mipitx-current-drive = <0x8>;
 };
 
 dsi0: dsi at 1401b000 {
-- 
2.21.0