Aw: Re: [PATCH v3 5/5] arm: dts: mt7623: add display subsystem related device nodes
Frank Wunderlich
frank-w at public-files.de
Tue Aug 4 15:22:25 UTC 2020
Hi
Except mmsys (i added in Patch #1) all mt7623-compatibles are not defined in code and fallback (mt2701-x/mt8173-x) is used. If i add it in dt-binding, it should be added in code too, right? or should i remove mt7623 compatibles and only add documentation for new mmsys?
regards Frank
> Gesendet: Dienstag, 04. August 2020 um 17:00 Uhr
> Von: "Chun-Kuang Hu" <chunkuang.hu at kernel.org>
> An: "Frank Wunderlich" <linux at fw-web.de>
> > + mipi_tx0: mipi-dphy at 10010000 {
> > + compatible = "mediatek,mt7623-mipi-tx",
>
> In mediatek,dsi.txt [1], "mediatek,mt7623-mipi-tx" is undefined.
>
> [1] https://www.kernel.org/doc/Documentation/devicetree/bindings/display/mediatek/mediatek%2Cdsi.txt
in drivers/gpu/drm/mediatek/mtk_mipi_tx.c only the compatible for mt2701 is defined (which is fallback in dts). So should i remove mt7623 compatible here and in the other occurences?
>
> > + "mediatek,mt2701-mipi-tx";
> > +
> > + cec: cec at 10012000 {
> > + compatible = "mediatek,mt7623-cec",
>
> Please explicitly define "mediatek,mt7623-cec" in mediatek,hdmi.txt [2].
>
> [2] https://www.kernel.org/doc/Documentation/devicetree/bindings/display/mediatek/mediatek%2Chdmi.txt
>
> > + "mediatek,mt8173-cec";
same here...only mt8173-cec is defined in drivers/gpu/drm/mediatek/mtk_cec.c
> > cir: cir at 10013000 {
> > compatible = "mediatek,mt7623-cir";
> > reg = <0 0x10013000 0 0x1000>;
> > @@ -369,6 +393,18 @@ apmixedsys: syscon at 10209000 {
> > #clock-cells = <1>;
> > };
> >
> > + hdmi_phy: phy at 10209100 {
> > + compatible = "mediatek,mt7623-hdmi-phy",
>
> Ditto.
>
> > + "mediatek,mt2701-hdmi-phy";
same as above (./drivers/gpu/drm/mediatek/mtk_hdmi_phy.c)
> > + hdmiddc0: i2c at 11013000 {
> > + compatible = "mediatek,mt7623-hdmi-ddc",
>
> Ditto.
>
> > + "mediatek,mt8173-hdmi-ddc";
> > + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
> > + reg = <0 0x11013000 0 0x1C>;
> > + clocks = <&pericfg CLK_PERI_I2C3>;
> > + clock-names = "ddc-i2c";
> > + status = "disabled";
> > + };
> > +
> > nor_flash: spi at 11014000 {
> > compatible = "mediatek,mt7623-nor",
> > "mediatek,mt8173-nor";
> > @@ -766,6 +812,84 @@ mmsys: syscon at 14000000 {
> > #clock-cells = <1>;
> > };
> >
> > + display_components: dispsys at 14000000 {
> > + compatible = "mediatek,mt7623-mmsys",
> > + "mediatek,mt2701-mmsys";
>
> In mediatek,mmsys.txt [3], this should be:
>
> mmsys: syscon at 14000000 {
> compatible = "mediatek,mt7623-mmsys", "mediatek,mt2701-mmsys", "syscon"
>
> [3] https://www.kernel.org/doc/Documentation/devicetree/bindings/arm/mediatek/mediatek%2Cmmsys.txt
as i added this in driver, i add this to documentation (and maybe remove the fallback because it results in wrong routing?)
>
> > + reg = <0 0x14000000 0 0x1000>;
> > + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> > + };
> > +
> > + ovl at 14007000 {
> > + compatible = "mediatek,mt7623-disp-ovl",
>
> This is not defined in mediatek,disp.txt [4].
>
> [4] https://www.kernel.org/doc/Documentation/devicetree/bindings/display/mediatek/mediatek%2Cdisp.txt
also not defined in drivers/gpu/drm/mediatek/mtk_drm_drv.c so again fallback used
>
> > + "mediatek,mt2701-disp-ovl";
> > + reg = <0 0x14007000 0 0x1000>;
> > + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
> > + clocks = <&mmsys CLK_MM_DISP_OVL>;
> > + iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
> > + mediatek,larb = <&larb0>;
> > + };
> > +
> > + rdma0: rdma at 14008000 {
> > + compatible = "mediatek,mt7623-disp-rdma",
> > + "mediatek,mt2701-disp-rdma";
> > + reg = <0 0x14008000 0 0x1000>;
> > + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
> > + clocks = <&mmsys CLK_MM_DISP_RDMA>;
> > + iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
> > + mediatek,larb = <&larb0>;
> > + };
> > +
> > + wdma at 14009000 {
> > + compatible = "mediatek,mt7623-disp-wdma",
> > + "mediatek,mt2701-disp-wdma";
> > + reg = <0 0x14009000 0 0x1000>;
> > + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
> > + clocks = <&mmsys CLK_MM_DISP_WDMA>;
> > + iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
> > + mediatek,larb = <&larb0>;
> > + };
> > +
> > + bls: pwm at 1400a000 {
> > + compatible = "mediatek,mt7623-disp-pwm",
> > + "mediatek,mt2701-disp-pwm";
> > + reg = <0 0x1400a000 0 0x1000>;
> > + #pwm-cells = <2>;
> > + clocks = <&mmsys CLK_MM_MDP_BLS_26M>,
> > + <&mmsys CLK_MM_DISP_BLS>;
> > + clock-names = "main", "mm";
> > + status = "disabled";
> > + };
> > +
> > + color at 1400b000 {
> > + compatible = "mediatek,mt7623-disp-color",
> > + "mediatek,mt2701-disp-color";
> > + reg = <0 0x1400b000 0 0x1000>;
> > + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
> > + clocks = <&mmsys CLK_MM_DISP_COLOR>;
> > + };
> > +
> > + dsi: dsi at 1400c000 {
> > + compatible = "mediatek,mt7623-dsi",
>
> This is not defined in mediatek,dsi.txt [1].
>
> > + "mediatek,mt2701-dsi";
also fallback used (drivers/gpu/drm/mediatek/mtk_drm_drv.c)
> > + dpi0: dpi at 14014000 {
> > + compatible = "mediatek,mt7623-dpi",
>
> This is not defined in mediatek,dpi.txt [5].
>
> [5] https://www.kernel.org/doc/Documentation/devicetree/bindings/display/mediatek/mediatek%2Cdpi.txt
>
> > + "mediatek,mt2701-dpi";
More information about the dri-devel
mailing list