[PATCH 3/3] video: fbdev: mmp: fix sparse warnings about using incorrect types
Bartlomiej Zolnierkiewicz
b.zolnierkie at samsung.com
Fri Jan 3 11:39:06 UTC 2020
On 8/20/19 1:07 PM, Andrzej Hajda wrote:
> On 27.06.2019 16:08, Bartlomiej Zolnierkiewicz wrote:
>> Use ->screen_buffer instead of ->screen_base in mmpfb driver.
>>
>> [ Please see commit 17a7b0b4d974 ("fb.h: Provide alternate screen_base
>> pointer") for details. ]
>>
>> Also fix all other sparse warnings about using incorrect types in
>> mmp display subsystem.
>>
>> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie at samsung.com>
>
>
> Reviewed-by: Andrzej Hajda <a.hajda at samsung.com>
Thanks, I've queued the patch for v5.6.
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
> --
> Regards
> Andrzej
>
>
>> ---
>> drivers/video/fbdev/mmp/fb/mmpfb.c | 2 -
>> drivers/video/fbdev/mmp/hw/mmp_ctrl.c | 55 +++++++++++++++++++---------------
>> drivers/video/fbdev/mmp/hw/mmp_ctrl.h | 10 +++---
>> drivers/video/fbdev/mmp/hw/mmp_spi.c | 6 +--
>> 4 files changed, 41 insertions(+), 32 deletions(-)
>>
>> Index: b/drivers/video/fbdev/mmp/fb/mmpfb.c
>> ===================================================================
>> --- a/drivers/video/fbdev/mmp/fb/mmpfb.c
>> +++ b/drivers/video/fbdev/mmp/fb/mmpfb.c
>> @@ -522,7 +522,7 @@ static int fb_info_setup(struct fb_info
>> info->var.bits_per_pixel / 8;
>> info->fbops = &mmpfb_ops;
>> info->pseudo_palette = fbi->pseudo_palette;
>> - info->screen_base = fbi->fb_start;
>> + info->screen_buffer = fbi->fb_start;
>> info->screen_size = fbi->fb_size;
>>
>> /* For FB framework: Allocate color map and Register framebuffer*/
>> Index: b/drivers/video/fbdev/mmp/hw/mmp_ctrl.c
>> ===================================================================
>> --- a/drivers/video/fbdev/mmp/hw/mmp_ctrl.c
>> +++ b/drivers/video/fbdev/mmp/hw/mmp_ctrl.c
>> @@ -136,19 +136,26 @@ static void overlay_set_win(struct mmp_o
>> mutex_lock(&overlay->access_ok);
>>
>> if (overlay_is_vid(overlay)) {
>> - writel_relaxed(win->pitch[0], ®s->v_pitch_yc);
>> - writel_relaxed(win->pitch[2] << 16 |
>> - win->pitch[1], ®s->v_pitch_uv);
>> -
>> - writel_relaxed((win->ysrc << 16) | win->xsrc, ®s->v_size);
>> - writel_relaxed((win->ydst << 16) | win->xdst, ®s->v_size_z);
>> - writel_relaxed(win->ypos << 16 | win->xpos, ®s->v_start);
>> + writel_relaxed(win->pitch[0],
>> + (void __iomem *)®s->v_pitch_yc);
>> + writel_relaxed(win->pitch[2] << 16 | win->pitch[1],
>> + (void __iomem *)®s->v_pitch_uv);
>> +
>> + writel_relaxed((win->ysrc << 16) | win->xsrc,
>> + (void __iomem *)®s->v_size);
>> + writel_relaxed((win->ydst << 16) | win->xdst,
>> + (void __iomem *)®s->v_size_z);
>> + writel_relaxed(win->ypos << 16 | win->xpos,
>> + (void __iomem *)®s->v_start);
>> } else {
>> - writel_relaxed(win->pitch[0], ®s->g_pitch);
>> + writel_relaxed(win->pitch[0], (void __iomem *)®s->g_pitch);
>>
>> - writel_relaxed((win->ysrc << 16) | win->xsrc, ®s->g_size);
>> - writel_relaxed((win->ydst << 16) | win->xdst, ®s->g_size_z);
>> - writel_relaxed(win->ypos << 16 | win->xpos, ®s->g_start);
>> + writel_relaxed((win->ysrc << 16) | win->xsrc,
>> + (void __iomem *)®s->g_size);
>> + writel_relaxed((win->ydst << 16) | win->xdst,
>> + (void __iomem *)®s->g_size_z);
>> + writel_relaxed(win->ypos << 16 | win->xpos,
>> + (void __iomem *)®s->g_start);
>> }
>>
>> dmafetch_set_fmt(overlay);
>> @@ -233,11 +240,11 @@ static int overlay_set_addr(struct mmp_o
>> memcpy(&overlay->addr, addr, sizeof(struct mmp_addr));
>>
>> if (overlay_is_vid(overlay)) {
>> - writel_relaxed(addr->phys[0], ®s->v_y0);
>> - writel_relaxed(addr->phys[1], ®s->v_u0);
>> - writel_relaxed(addr->phys[2], ®s->v_v0);
>> + writel_relaxed(addr->phys[0], (void __iomem *)®s->v_y0);
>> + writel_relaxed(addr->phys[1], (void __iomem *)®s->v_u0);
>> + writel_relaxed(addr->phys[2], (void __iomem *)®s->v_v0);
>> } else
>> - writel_relaxed(addr->phys[0], ®s->g_0);
>> + writel_relaxed(addr->phys[0], (void __iomem *)®s->g_0);
>>
>> return overlay->addr.phys[0];
>> }
>> @@ -268,16 +275,18 @@ static void path_set_mode(struct mmp_pat
>> tmp |= dsi_rbswap & CFG_INTFRBSWAP_MASK;
>> writel_relaxed(tmp, ctrl_regs(path) + intf_rbswap_ctrl(path->id));
>>
>> - writel_relaxed((mode->yres << 16) | mode->xres, ®s->screen_active);
>> + writel_relaxed((mode->yres << 16) | mode->xres,
>> + (void __iomem *)®s->screen_active);
>> writel_relaxed((mode->left_margin << 16) | mode->right_margin,
>> - ®s->screen_h_porch);
>> + (void __iomem *)®s->screen_h_porch);
>> writel_relaxed((mode->upper_margin << 16) | mode->lower_margin,
>> - ®s->screen_v_porch);
>> + (void __iomem *)®s->screen_v_porch);
>> total_x = mode->xres + mode->left_margin + mode->right_margin +
>> mode->hsync_len;
>> total_y = mode->yres + mode->upper_margin + mode->lower_margin +
>> mode->vsync_len;
>> - writel_relaxed((total_y << 16) | total_x, ®s->screen_size);
>> + writel_relaxed((total_y << 16) | total_x,
>> + (void __iomem *)®s->screen_size);
>>
>> /* vsync ctrl */
>> if (path->output_type == PATH_OUT_DSI)
>> @@ -285,7 +294,7 @@ static void path_set_mode(struct mmp_pat
>> else
>> vsync_ctrl = ((mode->xres + mode->right_margin) << 16)
>> | (mode->xres + mode->right_margin);
>> - writel_relaxed(vsync_ctrl, ®s->vsync_ctrl);
>> + writel_relaxed(vsync_ctrl, (void __iomem *)®s->vsync_ctrl);
>>
>> /* set pixclock div */
>> sclk_src = clk_get_rate(path_to_ctrl(path)->clk);
>> @@ -366,9 +375,9 @@ static void path_set_default(struct mmp_
>> writel_relaxed(dma_ctrl1, ctrl_regs(path) + dma_ctrl(1, path->id));
>>
>> /* Configure default register values */
>> - writel_relaxed(0x00000000, ®s->blank_color);
>> - writel_relaxed(0x00000000, ®s->g_1);
>> - writel_relaxed(0x00000000, ®s->g_start);
>> + writel_relaxed(0x00000000, (void __iomem *)®s->blank_color);
>> + writel_relaxed(0x00000000, (void __iomem *)®s->g_1);
>> + writel_relaxed(0x00000000, (void __iomem *)®s->g_start);
>>
>> /*
>> * 1.enable multiple burst request in DMA AXI
>> Index: b/drivers/video/fbdev/mmp/hw/mmp_ctrl.h
>> ===================================================================
>> --- a/drivers/video/fbdev/mmp/hw/mmp_ctrl.h
>> +++ b/drivers/video/fbdev/mmp/hw/mmp_ctrl.h
>> @@ -1393,7 +1393,7 @@ struct mmphw_ctrl {
>> /* platform related, get from config */
>> const char *name;
>> int irq;
>> - void *reg_base;
>> + void __iomem *reg_base;
>> struct clk *clk;
>>
>> /* sys info */
>> @@ -1429,7 +1429,7 @@ static inline struct mmphw_ctrl *overlay
>> return path_to_ctrl(overlay->path);
>> }
>>
>> -static inline void *ctrl_regs(struct mmp_path *path)
>> +static inline void __iomem *ctrl_regs(struct mmp_path *path)
>> {
>> return path_to_ctrl(path)->reg_base;
>> }
>> @@ -1438,11 +1438,11 @@ static inline void *ctrl_regs(struct mmp
>> static inline struct lcd_regs *path_regs(struct mmp_path *path)
>> {
>> if (path->id == PATH_PN)
>> - return (struct lcd_regs *)(ctrl_regs(path) + 0xc0);
>> + return (struct lcd_regs __force *)(ctrl_regs(path) + 0xc0);
>> else if (path->id == PATH_TV)
>> - return (struct lcd_regs *)ctrl_regs(path);
>> + return (struct lcd_regs __force *)ctrl_regs(path);
>> else if (path->id == PATH_P2)
>> - return (struct lcd_regs *)(ctrl_regs(path) + 0x200);
>> + return (struct lcd_regs __force *)(ctrl_regs(path) + 0x200);
>> else {
>> dev_err(path->dev, "path id %d invalid\n", path->id);
>> BUG_ON(1);
>> Index: b/drivers/video/fbdev/mmp/hw/mmp_spi.c
>> ===================================================================
>> --- a/drivers/video/fbdev/mmp/hw/mmp_spi.c
>> +++ b/drivers/video/fbdev/mmp/hw/mmp_spi.c
>> @@ -31,7 +31,7 @@ static inline int lcd_spi_write(struct s
>> {
>> int timeout = 100000, isr, ret = 0;
>> u32 tmp;
>> - void *reg_base =
>> + void __iomem *reg_base = (void __iomem *)
>> *(void **)spi_master_get_devdata(spi->master);
>>
>> /* clear ISR */
>> @@ -80,7 +80,7 @@ static inline int lcd_spi_write(struct s
>>
>> static int lcd_spi_setup(struct spi_device *spi)
>> {
>> - void *reg_base =
>> + void __iomem *reg_base = (void __iomem *)
>> *(void **)spi_master_get_devdata(spi->master);
>> u32 tmp;
>>
>> @@ -146,7 +146,7 @@ int lcd_spi_register(struct mmphw_ctrl *
>> return -ENOMEM;
>> }
>> p_regbase = spi_master_get_devdata(master);
>> - *p_regbase = ctrl->reg_base;
>> + *p_regbase = (void __force *)ctrl->reg_base;
>>
>> /* set bus num to 5 to avoid conflict with other spi hosts */
>> master->bus_num = 5;
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
More information about the dri-devel
mailing list