[PATCH v3 1/3] fbdev: fix numbering of fbcon options

[Bartlomiej Zolnierkiewicz]

On 8/27/19 1:09 PM, Peter Rosin wrote:
> Three shall be the number thou shalt count, and the number of the
> counting shall be three. Four shalt thou not count...
> 
> One! Two! Five!
> 
> Fixes: efb985f6b265 ("[PATCH] fbcon: Console Rotation - Add framebuffer console documentation")
> Signed-off-by: Peter Rosin <peda at axentia.se>

Thanks, patch queued for v5.6 (also sorry for the delay).

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

> ---
>  Documentation/fb/fbcon.rst | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/fb/fbcon.rst b/Documentation/fb/fbcon.rst
> index ebca41785abe..65ba40255137 100644
> --- a/Documentation/fb/fbcon.rst
> +++ b/Documentation/fb/fbcon.rst
> @@ -127,7 +127,7 @@ C. Boot options
>  	is typically located on the same video card.  Thus, the consoles that
>  	are controlled by the VGA console will be garbled.
>  
> -4. fbcon=rotate:<n>
> +5. fbcon=rotate:<n>
>  
>  	This option changes the orientation angle of the console display. The
>  	value 'n' accepts the following:
> @@ -152,21 +152,21 @@ C. Boot options
>  	Actually, the underlying fb driver is totally ignorant of console
>  	rotation.
>  
> -5. fbcon=margin:<color>
> +6. fbcon=margin:<color>
>  
>  	This option specifies the color of the margins. The margins are the
>  	leftover area at the right and the bottom of the screen that are not
>  	used by text. By default, this area will be black. The 'color' value
>  	is an integer number that depends on the framebuffer driver being used.
>  
> -6. fbcon=nodefer
> +7. fbcon=nodefer
>  
>  	If the kernel is compiled with deferred fbcon takeover support, normally
>  	the framebuffer contents, left in place by the firmware/bootloader, will
>  	be preserved until there actually is some text is output to the console.
>  	This option causes fbcon to bind immediately to the fbdev device.
>  
> -7. fbcon=logo-pos:<location>
> +8. fbcon=logo-pos:<location>
>  
>  	The only possible 'location' is 'center' (without quotes), and when
>  	given, the bootup logo is moved from the default top-left corner