[PATCH v4 12/37] PM / devfreq: tegra20: Use MC timings for building OPP table

[Chanwoo Choi]

Hi Dmitry,

On 6/9/20 10:13 PM, Dmitry Osipenko wrote:
> The clk_round_rate() won't be usable for building OPP table once
> interconnect support will be added to the EMC driver because that CLK API
> function limits the rounded rate based on the clk rate that is imposed by
> active clk-users, and thus, the rounding won't work as expected if
> interconnect will set the minimum EMC clock rate before devfreq driver is
> loaded. The struct tegra_mc contains memory timings which could be used by
> the devfreq driver for building up OPP table instead of rounding clock
> rate, this patch implements this idea.
> 
> Signed-off-by: Dmitry Osipenko <digetx at gmail.com>
> ---
>  drivers/devfreq/tegra20-devfreq.c | 18 +++++++++++-------
>  1 file changed, 11 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/devfreq/tegra20-devfreq.c b/drivers/devfreq/tegra20-devfreq.c
> index 6469dc69c5e0..bf504ca4dea2 100644
> --- a/drivers/devfreq/tegra20-devfreq.c
> +++ b/drivers/devfreq/tegra20-devfreq.c
> @@ -123,8 +123,7 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
>  {
>  	struct tegra_devfreq *tegra;
>  	struct tegra_mc *mc;
> -	unsigned long max_rate;
> -	unsigned long rate;
> +	unsigned int i;
>  	int err;
>  
>  	mc = tegra_get_memory_controller();
> @@ -151,12 +150,17 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
>  
>  	tegra->regs = mc->regs;
>  
> -	max_rate = clk_round_rate(tegra->emc_clock, ULONG_MAX);
> -
> -	for (rate = 0; rate <= max_rate; rate++) {
> -		rate = clk_round_rate(tegra->emc_clock, rate);
> +	if (!mc->num_timings) {

Could you explain what is meaning of 'num_timing?
Also, why add the opp entry in case of mc->num_timings is zero?

> +		err = dev_pm_opp_add(&pdev->dev,
> +				     clk_get_rate(tegra->emc_clock), 0);
> +		if (err) {
> +			dev_err(&pdev->dev, "failed to add OPP: %d\n", err);
> +			return err;
> +		}
> +	}
>  
> -		err = dev_pm_opp_add(&pdev->dev, rate, 0);
> +	for (i = 0; i < mc->num_timings; i++) {
> +		err = dev_pm_opp_add(&pdev->dev, mc->timings[i].rate, 0);
>  		if (err) {
>  			dev_err(&pdev->dev, "failed to add opp: %d\n", err);
>  			goto remove_opps;
> 


-- 
Best Regards,
Chanwoo Choi
Samsung Electronics