[PATCH v4 12/37] PM / devfreq: tegra20: Use MC timings for building OPP table

[Dmitry Osipenko]

02.07.2020 07:18, Chanwoo Choi пишет:
> Hi Dmitry,
> 
> On 6/9/20 10:13 PM, Dmitry Osipenko wrote:
>> The clk_round_rate() won't be usable for building OPP table once
>> interconnect support will be added to the EMC driver because that CLK API
>> function limits the rounded rate based on the clk rate that is imposed by
>> active clk-users, and thus, the rounding won't work as expected if
>> interconnect will set the minimum EMC clock rate before devfreq driver is
>> loaded. The struct tegra_mc contains memory timings which could be used by
>> the devfreq driver for building up OPP table instead of rounding clock
>> rate, this patch implements this idea.
>>
>> Signed-off-by: Dmitry Osipenko <digetx at gmail.com>
>> ---
>>  drivers/devfreq/tegra20-devfreq.c | 18 +++++++++++-------
>>  1 file changed, 11 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/devfreq/tegra20-devfreq.c b/drivers/devfreq/tegra20-devfreq.c
>> index 6469dc69c5e0..bf504ca4dea2 100644
>> --- a/drivers/devfreq/tegra20-devfreq.c
>> +++ b/drivers/devfreq/tegra20-devfreq.c
>> @@ -123,8 +123,7 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
>>  {
>>  	struct tegra_devfreq *tegra;
>>  	struct tegra_mc *mc;
>> -	unsigned long max_rate;
>> -	unsigned long rate;
>> +	unsigned int i;
>>  	int err;
>>  
>>  	mc = tegra_get_memory_controller();
>> @@ -151,12 +150,17 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
>>  
>>  	tegra->regs = mc->regs;
>>  
>> -	max_rate = clk_round_rate(tegra->emc_clock, ULONG_MAX);
>> -
>> -	for (rate = 0; rate <= max_rate; rate++) {
>> -		rate = clk_round_rate(tegra->emc_clock, rate);
>> +	if (!mc->num_timings) {
> 
> Could you explain what is meaning of 'num_timing?

The num_timings is the number of memory timings defined in a
device-tree. One timing configuration per memory clock rate.

> Also, why add the opp entry in case of mc->num_timings is zero?

Timings may be not defined in some device-trees at all and in this case
memory always running on a fixed clock rate.

The devfreq driver won't be practically useful if mc->num_timings is
zero since memory frequency can't be changed, but anyways we'd want to
load the devfreq driver in order to prevent confusion about why it's not
loaded.

For example, you may ask somebody to show contents of
/sys/class/devfreq/tegra20-devfreq/trans_stat and the person says to you
that this file doesn't exist, now you'll have to figure out what
happened to the devfreq driver.