[v1] drm/msm/dpu: enumerate second cursor pipe for external interface

[Kalyan Thota]

Setup an RGB HW pipe as cursor which can be used on
secondary interface.

For SC7180 2 HW pipes are enumerated as cursors
1 - primary interface
2 - secondary interface

Signed-off-by: Kalyan Thota <kalyan_t at codeaurora.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 8f2357d..23061fd 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -117,10 +117,10 @@
 		.reg_off = 0x2AC, .bit_off = 0},
 	.clk_ctrls[DPU_CLK_CTRL_DMA0] = {
 		.reg_off = 0x2AC, .bit_off = 8},
-	.clk_ctrls[DPU_CLK_CTRL_DMA1] = {
-		.reg_off = 0x2B4, .bit_off = 8},
 	.clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
-		.reg_off = 0x2BC, .bit_off = 8},
+		.reg_off = 0x2B4, .bit_off = 8},
+	.clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
+		.reg_off = 0x2C4, .bit_off = 8},
 	},
 };
 
@@ -272,10 +272,10 @@
 		sc7180_vig_sblk_0, 0,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
 	SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000,  DMA_SDM845_MASK,
 		sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
-	SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000,  DMA_SDM845_MASK,
-		sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
+	SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000,  DMA_CURSOR_SDM845_MASK,
+		sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
 	SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000,  DMA_CURSOR_SDM845_MASK,
-		sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
+		sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
 };
 
 /*************************************************************
-- 
1.9.1