[PATCH 1/2] drivers: drm: panel: Add TM5P5 NT35596 panel driver
Sam Ravnborg
sam at ravnborg.org
Sat May 2 11:16:30 UTC 2020
Hi Konrad.
On Sat, May 02, 2020 at 12:09:45PM +0200, Konrad Dybcio wrote:
> Hi,
>
> Thanks for your review. I'll send a v2 soon, however we need to solve the
> compat string issue first.
>
> How should I document tm5p5? I think it's rather some kind of a model no.
> along with the nt35596 IC than a vendor name.. Or should we call it
> something like "unknown,tm5p5-nt35596",
> perhaps "asus,z00t-tm5p5-n35596"
This is the best choice I think.
It is mounted inside an asus phone and we have no bette clue what vendor
it is.
Include the info you already provided in these mails in the binding,
so if anyone tries to dig deeper or have better knowledge one day we
have the original findings documented.
Searching a little reveals the the zenphone 2 laser uses a TruVivid
display - so seems to be asus manufactured.
So that only confirms that your suggestion is good.
Sam
> [1]?
>
> [1] Z00T is the model number of the smartphone that uses this panel
>
> Konrad
>
> On Sat, May 2, 2020, 09:05 Sam Ravnborg <sam at ravnborg.org> wrote:
>
> > Hi Konrad.
> >
> > On Fri, May 01, 2020 at 10:48:22PM +0200, Konrad Dybcio wrote:
> > > This adds support for TMP5P5 NT35596 1080x1920 video
> > > mode panel that can be found on some Asus Zenfone 2
> > > Laser (Z00T) devices.
> >
> > Very well-writen driver. Only a few small things in the following.
> >
> > Sam
> >
> > >
> > > Signed-off-by: Konrad Dybcio <konradybcio at gmail.com>
> > > ---
> > > drivers/gpu/drm/panel/Kconfig | 9 +
> > > drivers/gpu/drm/panel/Makefile | 1 +
> > > drivers/gpu/drm/panel/panel-tm5p5-nt35596.c | 366 ++++++++++++++++++++
> > > 3 files changed, 376 insertions(+)
> > > create mode 100644 drivers/gpu/drm/panel/panel-tm5p5-nt35596.c
> > >
> > > diff --git a/drivers/gpu/drm/panel/Kconfig
> > b/drivers/gpu/drm/panel/Kconfig
> > > index a1723c1b5fbf8..6ff892334ac4b 100644
> > > --- a/drivers/gpu/drm/panel/Kconfig
> > > +++ b/drivers/gpu/drm/panel/Kconfig
> > > @@ -401,6 +401,15 @@ config DRM_PANEL_SONY_ACX565AKM
> > > Say Y here if you want to enable support for the Sony ACX565AKM
> > > 800x600 3.5" panel (found on the Nokia N900).
> > >
> > > +config DRM_PANEL_TM5P5_NT35596
> > > + tristate "TM5P5 NT35596 panel"
> > > + depends on GPIOLIB && OF
> > > + depends on DRM_MIPI_DSI
> > > + help
> > > + Say Y here if you want to enable support for the TMP5P5
> > > + NT35596 1080x1920 video mode panel as found in some Asus
> > > + Zenfone 2 Laser Z00T devices.
> > > +
> > > config DRM_PANEL_TPO_TD028TTEC1
> > > tristate "Toppoly (TPO) TD028TTEC1 panel driver"
> > > depends on OF && SPI
> > > diff --git a/drivers/gpu/drm/panel/Makefile
> > b/drivers/gpu/drm/panel/Makefile
> > > index 96a883cd66305..4fc7e00b18502 100644
> > > --- a/drivers/gpu/drm/panel/Makefile
> > > +++ b/drivers/gpu/drm/panel/Makefile
> > > @@ -42,6 +42,7 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) +=
> > panel-sitronix-st7701.o
> > > obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
> > > obj-$(CONFIG_DRM_PANEL_SONY_ACX424AKP) += panel-sony-acx424akp.o
> > > obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
> > > +obj-$(CONFIG_DRM_PANEL_TM5P5_NT35596) += panel-tm5p5-nt35596.o
> > > obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
> > > obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
> > > obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
> > > diff --git a/drivers/gpu/drm/panel/panel-tm5p5-nt35596.c
> > b/drivers/gpu/drm/panel/panel-tm5p5-nt35596.c
> > > new file mode 100644
> > > index 0000000000000..c361ab76812b8
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/panel/panel-tm5p5-nt35596.c
> > > @@ -0,0 +1,366 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +
> > > +#include <linux/backlight.h>
> > > +#include <linux/delay.h>
> > > +#include <linux/gpio/consumer.h>
> > > +#include <linux/module.h>
> > > +#include <linux/of.h>
> > > +#include <linux/regulator/consumer.h>
> > > +
> > > +#include <drm/drm_mipi_dsi.h>
> > > +#include <drm/drm_modes.h>
> > > +#include <drm/drm_panel.h>
> > > +
> > > +struct tm5p5_nt35596 {
> > > + struct drm_panel panel;
> > > + struct mipi_dsi_device *dsi;
> > > + struct regulator_bulk_data supplies[2];
> > > + struct gpio_desc *reset_gpio;
> > > + bool prepared;
> > > +};
> > > +
> > > +static inline struct tm5p5_nt35596 *to_tm5p5_nt35596(struct drm_panel
> > *panel)
> > > +{
> > > + return container_of(panel, struct tm5p5_nt35596, panel);
> > > +}
> > > +
> > > +#define dsi_generic_write_seq(dsi, seq...) do {
> > \
> > > + static const u8 d[] = { seq }; \
> > > + int ret; \
> > > + ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d)); \
> > > + if (ret < 0) \
> > > + return ret; \
> > > + } while (0)
> > > +
> > > +#define dsi_dcs_write_seq(dsi, seq...) do { \
> > > + static const u8 d[] = { seq }; \
> > > + int ret; \
> > > + ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \
> > > + if (ret < 0) \
> > > + return ret; \
> > > + } while (0)
> > > +
> > > +static void tm5p5_nt35596_reset(struct tm5p5_nt35596 *ctx)
> > > +{
> > > + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> > > + usleep_range(1000, 2000);
> > > + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> > > + usleep_range(1000, 2000);
> > > + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> > > + usleep_range(15000, 16000);
> > > +}
> > > +
> > > +static int tm5p5_nt35596_on(struct tm5p5_nt35596 *ctx)
> > > +{
> > > + struct mipi_dsi_device *dsi = ctx->dsi;
> >
> > Do you have any idea of what happens in the following?
> > I recall 0xff is explained in a few other drivers for example.
> >
> > If you get an idea it would be nice with a few headlines.
> > > +
> > > + dsi_generic_write_seq(dsi, 0xff, 0x05);
> > > + dsi_generic_write_seq(dsi, 0xfb, 0x01);
> > > + dsi_generic_write_seq(dsi, 0xc5, 0x31);
> > > + dsi_generic_write_seq(dsi, 0xff, 0x04);
> > > + dsi_generic_write_seq(dsi, 0x01, 0x84);
> > > + dsi_generic_write_seq(dsi, 0x05, 0x25);
> > > + dsi_generic_write_seq(dsi, 0x06, 0x01);
> > > + dsi_generic_write_seq(dsi, 0x07, 0x20);
> > > + dsi_generic_write_seq(dsi, 0x08, 0x06);
> > > + dsi_generic_write_seq(dsi, 0x09, 0x08);
> > > + dsi_generic_write_seq(dsi, 0x0a, 0x10);
> > > + dsi_generic_write_seq(dsi, 0x0b, 0x10);
> > > + dsi_generic_write_seq(dsi, 0x0c, 0x10);
> > > + dsi_generic_write_seq(dsi, 0x0d, 0x14);
> > > + dsi_generic_write_seq(dsi, 0x0e, 0x14);
> > > + dsi_generic_write_seq(dsi, 0x0f, 0x14);
> > > + dsi_generic_write_seq(dsi, 0x10, 0x14);
> > > + dsi_generic_write_seq(dsi, 0x11, 0x14);
> > > + dsi_generic_write_seq(dsi, 0x12, 0x14);
> > > + dsi_generic_write_seq(dsi, 0x17, 0xf3);
> > > + dsi_generic_write_seq(dsi, 0x18, 0xc0);
> > > + dsi_generic_write_seq(dsi, 0x19, 0xc0);
> > > + dsi_generic_write_seq(dsi, 0x1a, 0xc0);
> > > + dsi_generic_write_seq(dsi, 0x1b, 0xb3);
> > > + dsi_generic_write_seq(dsi, 0x1c, 0xb3);
> > > + dsi_generic_write_seq(dsi, 0x1d, 0xb3);
> > > + dsi_generic_write_seq(dsi, 0x1e, 0xb3);
> > > + dsi_generic_write_seq(dsi, 0x1f, 0xb3);
> > > + dsi_generic_write_seq(dsi, 0x20, 0xb3);
> > > + dsi_generic_write_seq(dsi, 0xfb, 0x01);
> > > + dsi_generic_write_seq(dsi, 0xff, 0x00);
> > > + dsi_generic_write_seq(dsi, 0xfb, 0x01);
> > > + dsi_generic_write_seq(dsi, 0x35, 0x01);
> > > + dsi_generic_write_seq(dsi, 0xd3, 0x06);
> > > + dsi_generic_write_seq(dsi, 0xd4, 0x04);
> > > + dsi_generic_write_seq(dsi, 0x5e, 0x0d);
> > > + dsi_generic_write_seq(dsi, 0x11, 0x00);
> > > + msleep(100);
> > > + dsi_generic_write_seq(dsi, 0x29, 0x00);
> > > + dsi_generic_write_seq(dsi, 0x53, 0x24);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int tm5p5_nt35596_off(struct tm5p5_nt35596 *ctx)
> > > +{
> > > + struct mipi_dsi_device *dsi = ctx->dsi;
> > > + struct device *dev = &dsi->dev;
> > > + int ret;
> > > +
> > > + ret = mipi_dsi_dcs_set_display_off(dsi);
> > > + if (ret < 0) {
> > > + dev_err(dev, "Failed to set display off: %d\n", ret);
> > > + return ret;
> > > + }
> > > + msleep(60);
> > > +
> > > + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> > > + if (ret < 0) {
> > > + dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
> > > + return ret;
> > > + }
> >
> > I wonder why the panel do not need a:
> > mipi_dsi_dcs_exit_sleep_mode()
> > and
> > mipi_dsi_dcs_set_display_on()
> >
> > in the tm5p5_nt35596_on() function.
> >
> > Usually the prepare and unprepare steps are
> > somehow symmetrical.
> >
> > > +
> > > + dsi_dcs_write_seq(dsi, 0x4f, 0x01);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int tm5p5_nt35596_prepare(struct drm_panel *panel)
> > > +{
> > > + struct tm5p5_nt35596 *ctx = to_tm5p5_nt35596(panel);
> > > + struct device *dev = &ctx->dsi->dev;
> > > + int ret;
> > > +
> > > + if (ctx->prepared)
> > > + return 0;
> > > +
> > > + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies),
> > ctx->supplies);
> > > + if (ret < 0) {
> > > + dev_err(dev, "Failed to enable regulators: %d\n", ret);
> > > + return ret;
> > > + }
> > > +
> > > + tm5p5_nt35596_reset(ctx);
> > > +
> > > + ret = tm5p5_nt35596_on(ctx);
> > > + if (ret < 0) {
> > > + dev_err(dev, "Failed to initialize panel: %d\n", ret);
> > > + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> > > + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies),
> > ctx->supplies);
> > Line too long.
> >
> > > + return ret;
> > > + }
> > > +
> > > + ctx->prepared = true;
> > > + return 0;
> > > +}
> > > +
> > > +static int tm5p5_nt35596_unprepare(struct drm_panel *panel)
> > > +{
> > > + struct tm5p5_nt35596 *ctx = to_tm5p5_nt35596(panel);
> > > + struct device *dev = &ctx->dsi->dev;
> > > + int ret;
> > > +
> > > + if (!ctx->prepared)
> > > + return 0;
> > > +
> > > + ret = tm5p5_nt35596_off(ctx);
> > > + if (ret < 0)
> > > + dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
> > > +
> > > + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> > > + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> > > +
> > > + ctx->prepared = false;
> > > + return 0;
> > > +}
> > > +
> > > +static const struct drm_display_mode tm5p5_nt35596_mode = {
> > > + .clock = (1080 + 100 + 8 + 16) * (1920 + 4 + 2 + 4) * 60 / 1000,
> > > + .hdisplay = 1080,
> > > + .hsync_start = 1080 + 100,
> > > + .hsync_end = 1080 + 100 + 8,
> > > + .htotal = 1080 + 100 + 8 + 16,
> > > + .vdisplay = 1920,
> > > + .vsync_start = 1920 + 4,
> > > + .vsync_end = 1920 + 4 + 2,
> > > + .vtotal = 1920 + 4 + 2 + 4,
> > > + .vrefresh = 60,
> > > + .width_mm = 68,
> > > + .height_mm = 121,
> > > +};
> > We have patches pending to remove vrefresh, which I thought
> > was already applied. Anyway, keep it here.
> > We will eaither remove it later or if the patches crosses
> > I will do it when applying this patch.
> >
> > > +
> > > +static int tm5p5_nt35596_get_modes(struct drm_panel *panel,
> > > + struct drm_connector *connector)
> > > +{
> > > + struct drm_display_mode *mode;
> > > +
> > > + mode = drm_mode_duplicate(connector->dev, &tm5p5_nt35596_mode);
> > > + if (!mode)
> > > + return -ENOMEM;
> > > +
> > > + drm_mode_set_name(mode);
> > > +
> > > + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> > > + connector->display_info.width_mm = mode->width_mm;
> > > + connector->display_info.height_mm = mode->height_mm;
> > > + drm_mode_probed_add(connector, mode);
> > > +
> > > + return 1;
> > > +}
> > > +
> > > +static const struct drm_panel_funcs tm5p5_nt35596_panel_funcs = {
> > > + .prepare = tm5p5_nt35596_prepare,
> > > + .unprepare = tm5p5_nt35596_unprepare,
> > > + .get_modes = tm5p5_nt35596_get_modes,
> > > +};
> > > +
> > > +static int tm5p5_nt35596_bl_update_status(struct backlight_device *bl)
> > > +{
> > > + struct mipi_dsi_device *dsi = bl_get_data(bl);
> > > + u16 brightness = bl->props.brightness;
> > > + int ret;
> > > +
> > > + if (bl->props.power != FB_BLANK_UNBLANK ||
> > > + bl->props.fb_blank != FB_BLANK_UNBLANK ||
> > > + bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
> > > + brightness = 0;
> > > +
> > > + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> > > +
> > > + ret = mipi_dsi_dcs_set_display_brightness(dsi, brightness);
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +// TODO: Check if /sys/class/backlight/.../actual_brightness actually
> > returns
> > > +// correct values. If not, remove this function.
> > Please resolve this TODO
> >
> > > +static int tm5p5_nt35596_bl_get_brightness(struct backlight_device *bl)
> > > +{
> > > + struct mipi_dsi_device *dsi = bl_get_data(bl);
> > > + u16 brightness = bl->props.brightness;
> > > + int ret;
> > > +
> > > + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> > > +
> > > + ret = mipi_dsi_dcs_get_display_brightness(dsi, &brightness);
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> > > +
> > > + return brightness & 0xff;
> > > +}
> > > +
> > > +static const struct backlight_ops tm5p5_nt35596_bl_ops = {
> > > + .update_status = tm5p5_nt35596_bl_update_status,
> > > + .get_brightness = tm5p5_nt35596_bl_get_brightness,
> > > +};
> > > +
> > > +static struct backlight_device *
> > > +tm5p5_nt35596_create_backlight(struct mipi_dsi_device *dsi)
> > > +{
> > > + struct device *dev = &dsi->dev;
> > > + struct backlight_properties props = {
> > > + .type = BACKLIGHT_RAW,
> > > + .brightness = 255,
> > > + .max_brightness = 255,
> > > + };
> > Make props const.
> >
> > > +
> > > + return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
> > > + &tm5p5_nt35596_bl_ops,
> > &props);
> > > +}
> > > +
> > > +static int tm5p5_nt35596_probe(struct mipi_dsi_device *dsi)
> > > +{
> > > + struct device *dev = &dsi->dev;
> > > + struct tm5p5_nt35596 *ctx;
> > > + int ret;
> > > +
> > > + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> > > + if (!ctx)
> > > + return -ENOMEM;
> > > +
> > > + ctx->supplies[0].supply = "vdd";
> > > + ctx->supplies[1].supply = "vddio";
> > > + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
> > > + ctx->supplies);
> > > + if (ret < 0) {
> > > + dev_err(dev, "Failed to get regulators: %d\n", ret);
> > > + return ret;
> > > + }
> > > +
> > > + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> > > + if (IS_ERR(ctx->reset_gpio)) {
> > > + ret = PTR_ERR(ctx->reset_gpio);
> > > + dev_err(dev, "Failed to get reset-gpios: %d\n", ret);
> > > + return ret;
> > > + }
> > > +
> > > + ctx->dsi = dsi;
> > > + mipi_dsi_set_drvdata(dsi, ctx);
> > > +
> > > + dsi->lanes = 4;
> > > + dsi->format = MIPI_DSI_FMT_RGB888;
> > > + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> > > + MIPI_DSI_MODE_VIDEO_HSE |
> > MIPI_DSI_MODE_EOT_PACKET |
> > > + MIPI_DSI_CLOCK_NON_CONTINUOUS |
> > MIPI_DSI_MODE_LPM;
> > > +
> > > + drm_panel_init(&ctx->panel, dev, &tm5p5_nt35596_panel_funcs,
> > > + DRM_MODE_CONNECTOR_DSI);
> > > +
> > > + ctx->panel.backlight = tm5p5_nt35596_create_backlight(dsi);
> > > + if (IS_ERR(ctx->panel.backlight)) {
> > > + ret = PTR_ERR(ctx->panel.backlight);
> > > + dev_err(dev, "Failed to create backlight: %d\n", ret);
> > > + return ret;
> > > + }
> > > +
> > > + ret = drm_panel_add(&ctx->panel);
> > > + if (ret < 0) {
> > > + dev_err(dev, "Failed to add panel: %d\n", ret);
> > > + return ret;
> > > + }
> > > +
> > > + ret = mipi_dsi_attach(dsi);
> > > + if (ret < 0) {
> > > + dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
> > > + return ret;
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int tm5p5_nt35596_remove(struct mipi_dsi_device *dsi)
> > > +{
> > > + struct tm5p5_nt35596 *ctx = mipi_dsi_get_drvdata(dsi);
> > > + int ret;
> > > +
> > > + ret = mipi_dsi_detach(dsi);
> > > + if (ret < 0)
> > > + dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n",
> > ret);
> > Line too long I think
> >
> > > +
> > > + drm_panel_remove(&ctx->panel);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static const struct of_device_id tm5p5_nt35596_of_match[] = {
> > > + { .compatible = "tm5p5,nt35596" },
> > vendor tm5p5 is not documented.
> >
> > > + { /* sentinel */ }
> > > +};
> > > +MODULE_DEVICE_TABLE(of, tm5p5_nt35596_of_match);
> > > +
> > > +static struct mipi_dsi_driver tm5p5_nt35596_driver = {
> > > + .probe = tm5p5_nt35596_probe,
> > > + .remove = tm5p5_nt35596_remove,
> > > + .driver = {
> > > + .name = "panel-tm5p5-nt35596",
> > > + .of_match_table = tm5p5_nt35596_of_match,
> > > + },
> > > +};
> > > +module_mipi_dsi_driver(tm5p5_nt35596_driver);
> > > +
> > > +MODULE_AUTHOR("Konrad Dybcio <konradybcio at gmail.com>");
> > > +MODULE_DESCRIPTION("DRM driver for tm5p5 nt35596 1080p video mode dsi
> > panel");
> > > +MODULE_LICENSE("GPL v2");
> > > --
> > > 2.26.1
> >
More information about the dri-devel
mailing list