[PATCH v2 2/2] drm: bridge: Add SN65DSI84 DSI to LVDS bridge

[Jagan Teki]

On Fri, Feb 5, 2021 at 4:50 AM Marek Vasut <marex at denx.de> wrote:
>
> On 2/4/21 11:29 PM, Laurent Pinchart wrote:
> > Hi Jagan,
> >
> > Thank you for the patch.
> >
> > On Wed, Feb 03, 2021 at 12:42:56PM +0530, Jagan Teki wrote:
> >> SN65DSI84 is a Single Channel DSI to Dual-link LVDS bridge from
> >> Texas Instruments.
> >>
> >> SN65DSI83, SN65DSI85 are variants of the same family of bridge
> >> controllers.
> >>
> >> Right now the bridge driver is supporting a single link, dual-link
> >> support requires to initiate I2C Channel B registers.
> >
> > MArek Vasut (on CC) has very recently posted a driver for the SN65DSI86.
> > Should the two drivers be merged together ?
>
> Since Jagan's V1 was out first, I will let Jagan pick whatever might be
> useful from the driver I posted, probably the O(1) clock rate
> calculation and some of the regmap stuff, and once there is some merged
> result, I am happy to test it on my hardware. The DSI83 is I think the
> same as DSI84, except with half of the channels.

Thanks. please wait for the v3 series, we can discuss further on top.

Jagan.