[PATCH] fbtft: add tearing signal detect

[carlis]

On Tue, 26 Jan 2021 10:54:41 +0300
Dan Carpenter <dan.carpenter at oracle.com> wrote:

> On Sun, Jan 24, 2021 at 11:35:37PM +0800, Carlis wrote:
> > +static irqreturn_t spi_panel_te_handler(int irq, void *data)
> > +{
> > +	complete(&spi_panel_te);
> > +	return IRQ_HANDLED;
> > +}
> > +
> > +static void enable_spi_panel_te_irq(struct fbtft_par *par, bool
> > enable)  
> 
> It quite confused me that enable actually disables.  I always feel
> like it's clearer to write these as two separate functions.
> 
> > +{
> > +	static int te_irq_count;
> > +
> > +	if (!par->gpio.te) {  
> 
> This is always checked in the caller.  And it's when it's NULL that
> means it's deliberate so don't print a message.
> 
> > +		pr_err("%s:%d,SPI panel TE GPIO not configured\n",
> > +		       __func__, __LINE__);
> > +		return;
> > +	}
> > +
> > +	mutex_lock(&te_mutex);
> > +
> > +	if (enable) {
> > +		if (++te_irq_count == 1)
> > +			enable_irq(gpiod_to_irq(par->gpio.te));
> > +	} else {
> > +		if (--te_irq_count == 0)
> > +			disable_irq(gpiod_to_irq(par->gpio.te));
> > +	}
> > +	mutex_unlock(&te_mutex);
> > +}
> > +
> >  /**
> >   * init_display() - initialize the display controller
> >   *
> > @@ -82,6 +117,28 @@ enum st7789v_command {
> >   */
> >  static int init_display(struct fbtft_par *par)
> >  {
> > +	int rc;
> > +	struct device *dev = par->info->device;
> > +
> > +	par->gpio.te = devm_gpiod_get_index_optional(dev, "te", 0,
> > GPIOD_IN);
> > +	if (par->gpio.te) {  
> 
> devm_gpiod_get_index_optional() can return NULL or error pointers.  If
> it returns NULL then don't print an error message.  NULL reports are
> deliberate.
> 
> 	par->gpio.te = devm_gpiod_get_index_optional(dev, "te", 0,
> GPIOD_IN); if (IS_ERR(par->gpio.te)) {
> 		pr_err("%s:%d, TE gpio not specified\n", __func__,
> __LINE__); return PTR_ERR(par->gpio.te);
> 	}
> 
> 	if (par->gpio.te) {
> 
> 
> > +		init_completion(&spi_panel_te);
> > +		mutex_init(&te_mutex);
> > +		rc = devm_request_irq(dev,
> > +				      gpiod_to_irq(par->gpio.te),
> > +				     spi_panel_te_handler,
> > IRQF_TRIGGER_RISING,
> > +				     "TE_GPIO", par);
> > +		if (rc) {
> > +			pr_err("TE request_irq failed.\n");
> > +			par->gpio.te = NULL;
> > +		} else {
> > +
> > disable_irq_nosync(gpiod_to_irq(par->gpio.te));
> > +			pr_err("TE request_irq completion.\n");  
> 
> Why is this printing an error message if devm_request_irq() succeeds?
> 
> > +		}
> > +	} else {
> > +		pr_err("%s:%d, TE gpio not specified\n",
> > +		       __func__, __LINE__);
> > +	}
> >  	/* turn off sleep mode */
> >  	write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE);
> >  	mdelay(120);
> > @@ -137,6 +194,9 @@ static int init_display(struct fbtft_par *par)
> >  	 */
> >  	write_reg(par, PWCTRL1, 0xA4, 0xA1);
> >  
> > +    /*Tearing Effect Line On*/
> > +	if (par->gpio.te)
> > +		write_reg(par, 0x35, 0x00);
> >  	write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
> >  
> >  	if (HSD20_IPS)
> > @@ -145,6 +205,76 @@ static int init_display(struct fbtft_par *par)
> >  	return 0;
> >  }
> >  
> > +/*****************************************************************************
> > + *
> > + *   int (*write_vmem)(struct fbtft_par *par);
> > + *
> > +
> > *****************************************************************************/
> > + +/* 16 bit pixel over 8-bit databus */
> > +int st7789v_write_vmem16_bus8(struct fbtft_par *par, size_t
> > offset, size_t len) +{
> > +	u16 *vmem16;
> > +	__be16 *txbuf16 = par->txbuf.buf;
> > +	size_t remain;
> > +	size_t to_copy;
> > +	size_t tx_array_size;
> > +	int i;
> > +	int rc, ret = 0;  
> 
> Delete one of these "rc" or "rec" variables.
> 
> > +	size_t startbyte_size = 0;
> > +
> > +	fbtft_par_dbg(DEBUG_WRITE_VMEM, par, "st7789v
> > ---%s(offset=%zu, len=%zu)\n",
> > +		      __func__, offset, len);
> > +
> > +	remain = len / 2;
> > +	vmem16 = (u16 *)(par->info->screen_buffer + offset);
> > +
> > +	if (par->gpio.dc)
> > +		gpiod_set_value(par->gpio.dc, 1);
> > +
> > +	/* non buffered write */
> > +	if (!par->txbuf.buf)
> > +		return par->fbtftops.write(par, vmem16, len);
> > +
> > +	/* buffered write */
> > +	tx_array_size = par->txbuf.len / 2;
> > +
> > +	if (par->startbyte) {
> > +		txbuf16 = par->txbuf.buf + 1;
> > +		tx_array_size -= 2;
> > +		*(u8 *)(par->txbuf.buf) = par->startbyte | 0x2;
> > +		startbyte_size = 1;
> > +	}
> > +
> > +	while (remain) {
> > +		to_copy = min(tx_array_size, remain);
> > +		dev_dbg(par->info->device, "    to_copy=%zu,
> > remain=%zu\n",
> > +			to_copy, remain - to_copy);
> > +
> > +		for (i = 0; i < to_copy; i++)
> > +			txbuf16[i] = cpu_to_be16(vmem16[i]);
> > +
> > +		vmem16 = vmem16 + to_copy;
> > +		if (par->gpio.te) {
> > +			enable_spi_panel_te_irq(par, true);
> > +			reinit_completion(&spi_panel_te);
> > +			rc =
> > wait_for_completion_timeout(&spi_panel_te,
> > +
> > msecs_to_jiffies(SPI_PANEL_TE_TIMEOUT));
> > +			if (rc == 0)
> > +				pr_err("wait panel TE time out\n");
> > +		}
> > +		ret = par->fbtftops.write(par, par->txbuf.buf,
> > +
> > startbyte_size + to_copy * 2);  
> 
> Line break is whacky.
> 
> > +		if (par->gpio.te)
> > +			enable_spi_panel_te_irq(par, false);
> > +		if (ret < 0)
> > +			return ret;
> > +		remain -= to_copy;
> > +	}
> > +
> > +	return ret;  
> 
> Shouldn't this be "return len;" or something?
> 
> > +}
> > +  
> 
> regards,
> dan carpenter
> 

OK,i will fix in patch v4

regards,
zhangxuezhi