[PATCH v3] drm/msm/dp: add logs across DP driver for ease of debugging

[maitreye at codeaurora.org]

Hello Stephen,
Thanks again for the review comments



On 2021-07-20 22:31, Stephen Boyd wrote:
> Quoting maitreye (2021-07-20 15:39:30)
>> diff --git a/drivers/gpu/drm/msm/dp/dp_link.c 
>> b/drivers/gpu/drm/msm/dp/dp_link.c
>> index be986da..316e8e6 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_link.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_link.c
>> @@ -1036,43 +1036,46 @@ int dp_link_process_request(struct dp_link 
>> *dp_link)
>> 
>>         if (link->request.test_requested == DP_TEST_LINK_EDID_READ) {
>>                 dp_link->sink_request |= DP_TEST_LINK_EDID_READ;
>> -               return ret;
>> +               goto out;
>>         }
>> 
>>         ret = dp_link_process_ds_port_status_change(link);
>>         if (!ret) {
>>                 dp_link->sink_request |= DS_PORT_STATUS_CHANGED;
>> -               return ret;
>> +               goto out;
>>         }
>> 
>>         ret = dp_link_process_link_training_request(link);
>>         if (!ret) {
>>                 dp_link->sink_request |= DP_TEST_LINK_TRAINING;
>> -               return ret;
>> +               goto out;
>>         }
>> 
>>         ret = dp_link_process_phy_test_pattern_request(link);
>>         if (!ret) {
>>                 dp_link->sink_request |= 
>> DP_TEST_LINK_PHY_TEST_PATTERN;
>> -               return ret;
>> +               goto out;
>>         }
>> 
>>         ret = dp_link_process_link_status_update(link);
> 
> if ret == 0 we go into the if below and goto out.
> 
>>         if (!ret) {
>>                 dp_link->sink_request |= DP_LINK_STATUS_UPDATED;
>> -               return ret;
>> +               goto out;
>>         }
> 
> At this point ret != 0 due to the goto above.
> 
>> 
>>         if (dp_link_is_video_pattern_requested(link)) {
>> -               ret = 0;
> 
> And now we've removed the ret = 0 assignment from here.
> 
>>                 dp_link->sink_request |= DP_TEST_LINK_VIDEO_PATTERN;
>> +               goto out;
> 
> And then we goto out. Isn't this a behavior change? Still feels like we
> should be using if/else-if logic here instead of this goto maze.
> 
>>         }
>> 
>>         if (dp_link_is_audio_pattern_requested(link)) {
>>                 dp_link->sink_request |= DP_TEST_LINK_AUDIO_PATTERN;
>> -               return -EINVAL;
>> +               ret = -EINVAL;
>> +               goto out;
>>         }
>> 
>> +out:
>> +       DRM_DEBUG_DP("sink request=%#x", dp_link->sink_request);
>>         return ret;
>>  }
>> 

Thank you. I see what you are saying, and yes it makes sense, I'll 
change it to if else-if logic.