[PATCH v2 5/5] drm/vc4: hdmi: Raise the maximum clock rate

[Maxime Ripard]

Now that we have the infrastructure in place, we can raise the maximum
pixel rate we can reach for HDMI0 on the BCM2711.

HDMI1 is left untouched since its pixelvalve has a smaller FIFO and
would need a clock faster than what we can provide to support the same
modes.

Reviewed-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 530c83097b1a..a31771dd09e6 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -2190,7 +2190,7 @@ static const struct vc4_hdmi_variant bcm2711_hdmi0_variant = {
 	.encoder_type		= VC4_ENCODER_TYPE_HDMI0,
 	.debugfs_name		= "hdmi0_regs",
 	.card_name		= "vc4-hdmi-0",
-	.max_pixel_clock	= HDMI_14_MAX_TMDS_CLK,
+	.max_pixel_clock	= 600000000,
 	.registers		= vc5_hdmi_hdmi0_fields,
 	.num_registers		= ARRAY_SIZE(vc5_hdmi_hdmi0_fields),
 	.phy_lane_mapping	= {
-- 
2.30.2