Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target"

Steev Klimaszewski steev at kali.org
Thu Oct 14 15:47:58 UTC 2021


On 10/14/21 10:42 AM, Steev Klimaszewski wrote:
>
> On 10/14/21 8:54 AM, Dmitry Baryshkov wrote:
>> From: Amit Pundir <amit.pundir at linaro.org>
>>
>> This reverts commit 001ce9785c0674d913531345e86222c965fc8bf4.
>>
>> This upstream commit broke AOSP (post Android 12 merge) build
>> on RB5. The device either silently crashes into USB crash mode
>> after android boot animation or we see a blank blue screen
>> with following dpu errors in dmesg:
>>
>> [  T444] hw recovery is not complete for ctl:3
>> [  T444] [drm:dpu_encoder_phys_vid_prepare_for_kickoff:539] [dpu 
>> error]enc31 intf1 ctl 3 reset failure: -22
>> [  T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu 
>> error]vblank timeout
>> [  T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for 
>> commit done returned -110
>> [    C7] [drm:dpu_encoder_frame_done_timeout:2127] [dpu error]enc31 
>> frame done timeout
>> [  T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu 
>> error]vblank timeout
>> [  T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for 
>> commit done returned -110
>>
>> Signed-off-by: Amit Pundir <amit.pundir at linaro.org>
>> ---
>>   arch/arm64/boot/dts/qcom/sm8250.dtsi | 3 ++-
>>   1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi 
>> b/arch/arm64/boot/dts/qcom/sm8250.dtsi
>> index 8c15d9fed08f..d12e4cbfc852 100644
>> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
>> @@ -2590,9 +2590,10 @@
>>               power-domains = <&dispcc MDSS_GDSC>;
>>                 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
>> +                 <&gcc GCC_DISP_HF_AXI_CLK>,
>>                    <&gcc GCC_DISP_SF_AXI_CLK>,
>>                    <&dispcc DISP_CC_MDSS_MDP_CLK>;
>> -            clock-names = "iface", "nrt_bus", "core";
>> +            clock-names = "iface", "bus", "nrt_bus", "core";
>>                 assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
>>               assigned-clock-rates = <460000000>;
>
>
> Is this the correct fix for the issue?  I see those same messages on 
> the Lenovo Yoga C630 every so often as well as the blue screen, 
> however I see them on both 5.14 (which does not have the related 
> commit to this), and in 5.15-rcX, which does.  Or does this just 
> revert it enough that it doesn't occur as often?
>
Apologies, I hit send too soon.  To test here, I reverted 
111c52854102983f which is the related sdm845 commit, and the first 
reboot to test reverting it, I ended up with the bluescreen and the 
messages mentioned in the commit message above.


More information about the dri-devel mailing list