Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target"

[Vladimir Zapolskiy]

Hi Dmitry,

On 10/14/21 4:54 PM, Dmitry Baryshkov wrote:
> From: Amit Pundir <amit.pundir at linaro.org>
> 
> This reverts commit 001ce9785c0674d913531345e86222c965fc8bf4.
> 
> This upstream commit broke AOSP (post Android 12 merge) build
> on RB5. The device either silently crashes into USB crash mode
> after android boot animation or we see a blank blue screen
> with following dpu errors in dmesg:
> 
> [  T444] hw recovery is not complete for ctl:3
> [  T444] [drm:dpu_encoder_phys_vid_prepare_for_kickoff:539] [dpu error]enc31 intf1 ctl 3 reset failure: -22
> [  T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu error]vblank timeout
> [  T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for commit done returned -110
> [    C7] [drm:dpu_encoder_frame_done_timeout:2127] [dpu error]enc31 frame done timeout
> [  T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu error]vblank timeout
> [  T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for commit done returned -110
> 
> Signed-off-by: Amit Pundir <amit.pundir at linaro.org>

your sob tag is missing.

> ---
>   arch/arm64/boot/dts/qcom/sm8250.dtsi | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index 8c15d9fed08f..d12e4cbfc852 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -2590,9 +2590,10 @@
>   			power-domains = <&dispcc MDSS_GDSC>;
>   
>   			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +				 <&gcc GCC_DISP_HF_AXI_CLK>,
>   				 <&gcc GCC_DISP_SF_AXI_CLK>,
>   				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
> -			clock-names = "iface", "nrt_bus", "core";
> +			clock-names = "iface", "bus", "nrt_bus", "core";
>   
>   			assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
>   			assigned-clock-rates = <460000000>;
> 

--
Best wishes,
Vladimir