[PATCH v6 9/9] drm/omap: Add a 'right overlay' to plane state
Neil Armstrong
narmstrong at baylibre.com
Mon Oct 18 14:28:42 UTC 2021
From: Benoit Parrot <bparrot at ti.com>
If the drm_plane has a source width that's greater than the max width
supported by a single hw overlay, then we assign a 'r_overlay' to it in
omap_plane_atomic_check().
Both overlays should have the capabilities required to handle the source
framebuffer. The only parameters that vary between the left and right
hwoverlays are the src_w, crtc_w, src_x and crtc_x as we just even chop
the fb into left and right halves.
We also take care of not creating odd width size when dealing with YUV
formats.
Since both halves need to be 'appear' side by side the zpos is
recalculated when dealing with dual overlay cases so that the other
planes zpos is consistent.
Depending on user space usage it is possible that on occasion the number
of requested planes exceeds the numbers of overlays required to display
them. In that case a failure would be returned for the plane that cannot
be handled at that time. It is up to user space to make sure the H/W
resource are not over-subscribed.
Signed-off-by: Benoit Parrot <bparrot at ti.com>
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
drivers/gpu/drm/omapdrm/omap_drv.c | 91 ++++++++++++++++++-
drivers/gpu/drm/omapdrm/omap_fb.c | 33 ++++++-
drivers/gpu/drm/omapdrm/omap_fb.h | 4 +-
drivers/gpu/drm/omapdrm/omap_overlay.c | 23 ++++-
drivers/gpu/drm/omapdrm/omap_overlay.h | 3 +-
drivers/gpu/drm/omapdrm/omap_plane.c | 120 +++++++++++++++++++++++--
drivers/gpu/drm/omapdrm/omap_plane.h | 1 +
7 files changed, 263 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
index c7912374d393..f088b6313950 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.c
+++ b/drivers/gpu/drm/omapdrm/omap_drv.c
@@ -117,6 +117,95 @@ static void omap_atomic_commit_tail(struct drm_atomic_state *old_state)
dispc_runtime_put(priv->dispc);
}
+static int drm_atomic_state_normalized_zpos_cmp(const void *a, const void *b)
+{
+ const struct drm_plane_state *sa = *(struct drm_plane_state **)a;
+ const struct drm_plane_state *sb = *(struct drm_plane_state **)b;
+
+ if (sa->normalized_zpos != sb->normalized_zpos)
+ return sa->normalized_zpos - sb->normalized_zpos;
+ else
+ return sa->plane->base.id - sb->plane->base.id;
+}
+
+static int omap_atomic_update_normalize_zpos(struct drm_device *dev,
+ struct drm_atomic_state *state)
+{
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *old_state, *new_state;
+ struct drm_plane *plane;
+ int c, i, n, inc;
+ int total_planes = dev->mode_config.num_total_plane;
+ struct drm_plane_state **states;
+ int ret = 0;
+
+ states = kmalloc_array(total_planes, sizeof(*states), GFP_KERNEL);
+ if (!states)
+ return -ENOMEM;
+
+ for_each_oldnew_crtc_in_state(state, crtc, old_state, new_state, c) {
+ if (old_state->plane_mask == new_state->plane_mask &&
+ !new_state->zpos_changed)
+ continue;
+
+ /* Reset plane increment and index value for every crtc */
+ n = 0;
+
+ /*
+ * Normalization process might create new states for planes
+ * which normalized_zpos has to be recalculated.
+ */
+ drm_for_each_plane_mask(plane, dev, new_state->plane_mask) {
+ struct drm_plane_state *plane_state =
+ drm_atomic_get_plane_state(new_state->state,
+ plane);
+ if (IS_ERR(plane_state)) {
+ ret = PTR_ERR(plane_state);
+ goto done;
+ }
+ states[n++] = plane_state;
+ }
+
+ sort(states, n, sizeof(*states),
+ drm_atomic_state_normalized_zpos_cmp, NULL);
+
+ for (i = 0, inc = 0; i < n; i++) {
+ plane = states[i]->plane;
+
+ states[i]->normalized_zpos = i + inc;
+ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] updated normalized zpos value %d\n",
+ plane->base.id, plane->name,
+ states[i]->normalized_zpos);
+
+ if (is_omap_plane_dual_overlay(states[i]))
+ inc++;
+ }
+ new_state->zpos_changed = true;
+ }
+
+done:
+ kfree(states);
+ return ret;
+}
+
+static int omap_atomic_check(struct drm_device *dev,
+ struct drm_atomic_state *state)
+{
+ int ret;
+
+ ret = drm_atomic_helper_check(dev, state);
+ if (ret)
+ return ret;
+
+ if (dev->mode_config.normalize_zpos) {
+ ret = omap_atomic_update_normalize_zpos(dev, state);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
static const struct drm_mode_config_helper_funcs omap_mode_config_helper_funcs = {
.atomic_commit_tail = omap_atomic_commit_tail,
};
@@ -124,7 +213,7 @@ static const struct drm_mode_config_helper_funcs omap_mode_config_helper_funcs =
static const struct drm_mode_config_funcs omap_mode_config_funcs = {
.fb_create = omap_framebuffer_create,
.output_poll_changed = drm_fb_helper_output_poll_changed,
- .atomic_check = drm_atomic_helper_check,
+ .atomic_check = omap_atomic_check,
.atomic_commit = drm_atomic_helper_commit,
};
diff --git a/drivers/gpu/drm/omapdrm/omap_fb.c b/drivers/gpu/drm/omapdrm/omap_fb.c
index 190afc564914..895e66b08a81 100644
--- a/drivers/gpu/drm/omapdrm/omap_fb.c
+++ b/drivers/gpu/drm/omapdrm/omap_fb.c
@@ -131,7 +131,9 @@ static u32 drm_rotation_to_tiler(unsigned int drm_rot)
/* update ovl info for scanout, handles cases of multi-planar fb's, etc.
*/
void omap_framebuffer_update_scanout(struct drm_framebuffer *fb,
- struct drm_plane_state *state, struct omap_overlay_info *info)
+ struct drm_plane_state *state,
+ struct omap_overlay_info *info,
+ struct omap_overlay_info *r_info)
{
struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
const struct drm_format_info *format = omap_fb->format;
@@ -218,6 +220,35 @@ void omap_framebuffer_update_scanout(struct drm_framebuffer *fb,
} else {
info->p_uv_addr = 0;
}
+
+ if (r_info) {
+ info->width /= 2;
+ info->out_width /= 2;
+
+ *r_info = *info;
+
+ if (fb->format->is_yuv) {
+ if (info->width & 1) {
+ info->width++;
+ r_info->width--;
+ }
+
+ if (info->out_width & 1) {
+ info->out_width++;
+ r_info->out_width--;
+ }
+ }
+
+ r_info->pos_x = info->pos_x + info->out_width;
+
+ r_info->paddr = get_linear_addr(fb, format, 0,
+ x + info->width, y);
+ if (fb->format->format == DRM_FORMAT_NV12) {
+ r_info->p_uv_addr =
+ get_linear_addr(fb, format, 1,
+ x + info->width, y);
+ }
+ }
}
/* pin, prepare for scanout: */
diff --git a/drivers/gpu/drm/omapdrm/omap_fb.h b/drivers/gpu/drm/omapdrm/omap_fb.h
index c0e19aed8220..b75f0b5ef1d8 100644
--- a/drivers/gpu/drm/omapdrm/omap_fb.h
+++ b/drivers/gpu/drm/omapdrm/omap_fb.h
@@ -26,7 +26,9 @@ struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev,
int omap_framebuffer_pin(struct drm_framebuffer *fb);
void omap_framebuffer_unpin(struct drm_framebuffer *fb);
void omap_framebuffer_update_scanout(struct drm_framebuffer *fb,
- struct drm_plane_state *state, struct omap_overlay_info *info);
+ struct drm_plane_state *state,
+ struct omap_overlay_info *info,
+ struct omap_overlay_info *r_info);
bool omap_framebuffer_supports_rotation(struct drm_framebuffer *fb);
void omap_framebuffer_describe(struct drm_framebuffer *fb, struct seq_file *m);
diff --git a/drivers/gpu/drm/omapdrm/omap_overlay.c b/drivers/gpu/drm/omapdrm/omap_overlay.c
index afb2b44fdf86..10730c9b2752 100644
--- a/drivers/gpu/drm/omapdrm/omap_overlay.c
+++ b/drivers/gpu/drm/omapdrm/omap_overlay.c
@@ -67,12 +67,13 @@ omap_plane_find_free_overlay(struct drm_device *dev, struct drm_plane *hwoverlay
* next global overlay_map to be enabled when atomic transaction is valid.
*/
int omap_overlay_assign(struct drm_atomic_state *s, struct drm_plane *plane,
- u32 caps, u32 fourcc, struct omap_hw_overlay **overlay)
+ u32 caps, u32 fourcc, struct omap_hw_overlay **overlay,
+ struct omap_hw_overlay **r_overlay)
{
/* Get the global state of the current atomic transaction */
struct omap_global_state *state = omap_get_global_state(s);
struct drm_plane **overlay_map = state->hwoverlay_to_plane;
- struct omap_hw_overlay *ovl;
+ struct omap_hw_overlay *ovl, *r_ovl;
ovl = omap_plane_find_free_overlay(s->dev, overlay_map, caps, fourcc);
if (!ovl)
@@ -81,8 +82,26 @@ int omap_overlay_assign(struct drm_atomic_state *s, struct drm_plane *plane,
overlay_map[ovl->idx] = plane;
*overlay = ovl;
+ if (r_overlay) {
+ r_ovl = omap_plane_find_free_overlay(s->dev, overlay_map,
+ caps, fourcc);
+ if (!r_ovl) {
+ overlay_map[r_ovl->idx] = NULL;
+ *overlay = NULL;
+ return -ENOMEM;
+ }
+
+ overlay_map[r_ovl->idx] = plane;
+ *r_overlay = r_ovl;
+ }
+
DBG("%s: assign to plane %s caps %x", ovl->name, plane->name, caps);
+ if (r_overlay) {
+ DBG("%s: assign to right of plane %s caps %x",
+ r_ovl->name, plane->name, caps);
+ }
+
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/omap_overlay.h b/drivers/gpu/drm/omapdrm/omap_overlay.h
index 38ca55e1e2d7..e36a43f35563 100644
--- a/drivers/gpu/drm/omapdrm/omap_overlay.h
+++ b/drivers/gpu/drm/omapdrm/omap_overlay.h
@@ -28,7 +28,8 @@ struct omap_hw_overlay {
int omap_hwoverlays_init(struct omap_drm_private *priv);
void omap_hwoverlays_destroy(struct omap_drm_private *priv);
int omap_overlay_assign(struct drm_atomic_state *s, struct drm_plane *plane,
- u32 caps, u32 fourcc, struct omap_hw_overlay **overlay);
+ u32 caps, u32 fourcc, struct omap_hw_overlay **overlay,
+ struct omap_hw_overlay **r_overlay);
void omap_overlay_release(struct drm_atomic_state *s, struct omap_hw_overlay *overlay);
void omap_overlay_update_state(struct omap_drm_private *priv, struct omap_hw_overlay *overlay);
#endif /* __OMAPDRM_OVERLAY_H__ */
diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
index 5001c8354e4f..15cdff988dbc 100644
--- a/drivers/gpu/drm/omapdrm/omap_plane.c
+++ b/drivers/gpu/drm/omapdrm/omap_plane.c
@@ -24,6 +24,7 @@ struct omap_plane_state {
struct drm_plane_state base;
struct omap_hw_overlay *overlay;
+ struct omap_hw_overlay *r_overlay; /* right overlay */
};
#define to_omap_plane(x) container_of(x, struct omap_plane, base)
@@ -33,6 +34,13 @@ struct omap_plane {
enum omap_plane_id id;
};
+bool is_omap_plane_dual_overlay(struct drm_plane_state *state)
+{
+ struct omap_plane_state *omap_state = to_omap_plane_state(state);
+
+ return !!omap_state->r_overlay;
+}
+
static int omap_plane_prepare_fb(struct drm_plane *plane,
struct drm_plane_state *new_state)
{
@@ -61,16 +69,21 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
plane);
struct omap_plane_state *new_omap_state;
struct omap_plane_state *old_omap_state;
- struct omap_overlay_info info;
- enum omap_plane_id ovl_id;
+ struct omap_overlay_info info, r_info;
+ enum omap_plane_id ovl_id, r_ovl_id;
int ret;
+ bool dual_ovl;
new_omap_state = to_omap_plane_state(new_state);
old_omap_state = to_omap_plane_state(old_state);
+ dual_ovl = is_omap_plane_dual_overlay(new_state);
+
/* Cleanup previously held overlay if needed */
if (old_omap_state->overlay)
omap_overlay_update_state(priv, old_omap_state->overlay);
+ if (old_omap_state->r_overlay)
+ omap_overlay_update_state(priv, old_omap_state->r_overlay);
if (!new_omap_state->overlay) {
DBG("[PLANE:%d:%s] no overlay attached", plane->base.id, plane->name);
@@ -93,8 +106,11 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
info.color_encoding = new_state->color_encoding;
info.color_range = new_state->color_range;
+ r_info = info;
+
/* update scanout: */
- omap_framebuffer_update_scanout(new_state->fb, new_state, &info);
+ omap_framebuffer_update_scanout(new_state->fb, new_state, &info,
+ dual_ovl ? &r_info : NULL);
DBG("%s: %dx%d -> %dx%d (%d)",
new_omap_state->overlay->name, info.width, info.height,
@@ -102,6 +118,23 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
DBG("%d,%d %pad %pad", info.pos_x, info.pos_y,
&info.paddr, &info.p_uv_addr);
+ if (dual_ovl) {
+ r_ovl_id = new_omap_state->r_overlay->id;
+ /*
+ * If the current plane uses 2 hw planes the very next
+ * zorder is used by the r_overlay so we just use the
+ * main overlay zorder + 1
+ */
+ r_info.zorder = info.zorder + 1;
+
+ DBG("%s: %dx%d -> %dx%d (%d)",
+ new_omap_state->r_overlay->name,
+ r_info.width, r_info.height,
+ r_info.out_width, r_info.out_height, r_info.screen_width);
+ DBG("%d,%d %pad %pad", r_info.pos_x, r_info.pos_y,
+ &r_info.paddr, &r_info.p_uv_addr);
+ }
+
/* and finally, update omapdss: */
ret = dispc_ovl_setup(priv->dispc, ovl_id, &info,
omap_crtc_timings(new_state->crtc), false,
@@ -114,6 +147,21 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
}
dispc_ovl_enable(priv->dispc, ovl_id, true);
+
+ if (dual_ovl) {
+ ret = dispc_ovl_setup(priv->dispc, r_ovl_id, &r_info,
+ omap_crtc_timings(new_state->crtc), false,
+ omap_crtc_channel(new_state->crtc));
+ if (ret) {
+ dev_err(plane->dev->dev, "Failed to setup plane right-overlay %s\n",
+ plane->name);
+ dispc_ovl_enable(priv->dispc, r_ovl_id, false);
+ dispc_ovl_enable(priv->dispc, ovl_id, false);
+ return;
+ }
+
+ dispc_ovl_enable(priv->dispc, r_ovl_id, true);
+ }
}
static void omap_plane_atomic_disable(struct drm_plane *plane,
@@ -139,6 +187,11 @@ static void omap_plane_atomic_disable(struct drm_plane *plane,
omap_overlay_update_state(priv, old_omap_state->overlay);
new_omap_state->overlay = NULL;
+
+ if (is_omap_plane_dual_overlay(old_state)) {
+ omap_overlay_update_state(priv, old_omap_state->r_overlay);
+ new_omap_state->r_overlay = NULL;
+ }
}
#define FRAC_16_16(mult, div) (((mult) << 16) / (div))
@@ -154,6 +207,7 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
struct omap_plane_state *omap_state = to_omap_plane_state(new_plane_state);
struct omap_global_state *omap_overlay_global_state;
struct drm_crtc_state *crtc_state;
+ bool new_r_hw_overlay = false;
bool new_hw_overlay = false;
u32 max_width, max_height;
struct drm_crtc *crtc;
@@ -196,7 +250,9 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
if (!new_plane_state->visible) {
omap_overlay_release(state, omap_state->overlay);
+ omap_overlay_release(state, omap_state->r_overlay);
omap_state->overlay = NULL;
+ omap_state->r_overlay = NULL;
return 0;
}
@@ -213,8 +269,30 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
if (new_plane_state->src_h > max_height || new_plane_state->crtc_h > height)
return -EINVAL;
- if (new_plane_state->src_w > max_width || new_plane_state->crtc_w > width)
- return -EINVAL;
+
+ if (new_plane_state->src_w > max_width || new_plane_state->crtc_w > width) {
+ bool is_fourcc_yuv = new_plane_state->fb->format->is_yuv;
+
+ if (is_fourcc_yuv && (((new_plane_state->src_w >> 16) / 2 & 1) ||
+ new_plane_state->crtc_w / 2 & 1)) {
+ /*
+ * When calculating the split overlay width
+ * and it yield an odd value we will need to adjust
+ * the indivual width +/- 1. So make sure it fits
+ */
+ if (new_plane_state->src_w <= ((2 * width - 1) << 16) &&
+ new_plane_state->crtc_w <= (2 * width - 1))
+ new_r_hw_overlay = true;
+ else
+ return -EINVAL;
+ } else {
+ if (new_plane_state->src_w <= (2 * max_width) &&
+ new_plane_state->crtc_w <= (2 * width))
+ new_r_hw_overlay = true;
+ else
+ return -EINVAL;
+ }
+ }
if (new_plane_state->rotation != DRM_MODE_ROTATE_0 &&
!omap_framebuffer_supports_rotation(new_plane_state->fb))
@@ -239,24 +317,44 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
new_hw_overlay = true;
}
+ /*
+ * check if we need two overlays and only have 1 or
+ * if we had 2 overlays but will only need 1
+ */
+ if ((new_r_hw_overlay && !omap_state->r_overlay) ||
+ (!new_r_hw_overlay && omap_state->r_overlay))
+ new_hw_overlay = true;
+
if (new_hw_overlay) {
struct omap_hw_overlay *old_ovl = omap_state->overlay;
+ struct omap_hw_overlay *old_r_ovl = omap_state->r_overlay;
struct omap_hw_overlay *new_ovl = NULL;
+ struct omap_hw_overlay *new_r_ovl = NULL;
omap_overlay_release(state, old_ovl);
+ omap_overlay_release(state, old_r_ovl);
- ret = omap_overlay_assign(state, plane, caps, fourcc, &new_ovl);
+ ret = omap_overlay_assign(state, plane, caps, fourcc, &new_ovl,
+ new_r_hw_overlay ? &new_r_ovl : NULL);
if (ret) {
DBG("%s: failed to assign hw_overlay", plane->name);
omap_state->overlay = NULL;
+ omap_state->r_overlay = NULL;
return ret;
}
omap_state->overlay = new_ovl;
+ if (new_r_hw_overlay)
+ omap_state->r_overlay = new_r_ovl;
+ else
+ omap_state->r_overlay = NULL;
}
DBG("plane: %s overlay_id: %d", plane->name, omap_state->overlay->id);
+ if (omap_state->r_overlay)
+ DBG("plane: %s r_overlay_id: %d", plane->name, omap_state->r_overlay->id);
+
return 0;
}
@@ -344,6 +442,7 @@ omap_plane_atomic_duplicate_state(struct drm_plane *plane)
__drm_atomic_helper_plane_duplicate_state(plane, &state->base);
state->overlay = current_state->overlay;
+ state->r_overlay = current_state->r_overlay;
return &state->base;
}
@@ -361,6 +460,15 @@ static void omap_plane_atomic_print_state(struct drm_printer *p,
omap_state->overlay->id);
drm_printf(p, "\t\tcaps=0x%x\n", omap_state->overlay->caps);
}
+
+ drm_printf(p, "\tr_overlay=%s\n", omap_state->r_overlay ?
+ omap_state->r_overlay->name : "(null)");
+ if (omap_state->r_overlay) {
+ drm_printf(p, "\t\tidx=%d\n", omap_state->r_overlay->idx);
+ drm_printf(p, "\t\toverlay_id=%d\n",
+ omap_state->r_overlay->id);
+ drm_printf(p, "\t\tcaps=0x%x\n", omap_state->r_overlay->caps);
+ }
}
static int omap_plane_atomic_set_property(struct drm_plane *plane,
diff --git a/drivers/gpu/drm/omapdrm/omap_plane.h b/drivers/gpu/drm/omapdrm/omap_plane.h
index 0c28fe8ffa20..a9a33e12722a 100644
--- a/drivers/gpu/drm/omapdrm/omap_plane.h
+++ b/drivers/gpu/drm/omapdrm/omap_plane.h
@@ -22,5 +22,6 @@ struct drm_plane *omap_plane_init(struct drm_device *dev,
u32 possible_crtcs);
void omap_plane_install_properties(struct drm_plane *plane,
struct drm_mode_object *obj);
+bool is_omap_plane_dual_overlay(struct drm_plane_state *state);
#endif /* __OMAPDRM_PLANE_H__ */
--
2.25.1
More information about the dri-devel
mailing list