[PATCH v6 9/9] drm/omap: Add a 'right overlay' to plane state
Tomi Valkeinen
tomi.valkeinen at ideasonboard.com
Wed Oct 27 12:50:23 UTC 2021
On 18/10/2021 17:28, Neil Armstrong wrote:
> From: Benoit Parrot <bparrot at ti.com>
>
> If the drm_plane has a source width that's greater than the max width
> supported by a single hw overlay, then we assign a 'r_overlay' to it in
> omap_plane_atomic_check().
>
> Both overlays should have the capabilities required to handle the source
> framebuffer. The only parameters that vary between the left and right
> hwoverlays are the src_w, crtc_w, src_x and crtc_x as we just even chop
> the fb into left and right halves.
>
> We also take care of not creating odd width size when dealing with YUV
> formats.
>
> Since both halves need to be 'appear' side by side the zpos is
> recalculated when dealing with dual overlay cases so that the other
> planes zpos is consistent.
>
> Depending on user space usage it is possible that on occasion the number
> of requested planes exceeds the numbers of overlays required to display
> them. In that case a failure would be returned for the plane that cannot
> be handled at that time. It is up to user space to make sure the H/W
> resource are not over-subscribed.
>
> Signed-off-by: Benoit Parrot <bparrot at ti.com>
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
> drivers/gpu/drm/omapdrm/omap_drv.c | 91 ++++++++++++++++++-
> drivers/gpu/drm/omapdrm/omap_fb.c | 33 ++++++-
> drivers/gpu/drm/omapdrm/omap_fb.h | 4 +-
> drivers/gpu/drm/omapdrm/omap_overlay.c | 23 ++++-
> drivers/gpu/drm/omapdrm/omap_overlay.h | 3 +-
> drivers/gpu/drm/omapdrm/omap_plane.c | 120 +++++++++++++++++++++++--
> drivers/gpu/drm/omapdrm/omap_plane.h | 1 +
> 7 files changed, 263 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
> index c7912374d393..f088b6313950 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.c
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.c
> @@ -117,6 +117,95 @@ static void omap_atomic_commit_tail(struct drm_atomic_state *old_state)
> dispc_runtime_put(priv->dispc);
> }
>
> +static int drm_atomic_state_normalized_zpos_cmp(const void *a, const void *b)
> +{
> + const struct drm_plane_state *sa = *(struct drm_plane_state **)a;
> + const struct drm_plane_state *sb = *(struct drm_plane_state **)b;
> +
> + if (sa->normalized_zpos != sb->normalized_zpos)
> + return sa->normalized_zpos - sb->normalized_zpos;
> + else
> + return sa->plane->base.id - sb->plane->base.id;
> +}
I think this, or the function below, needs a comment. I don't think it's
obvious what's the logic here. It's mostly a copy of
drm_atomic_normalize_zpos and drm_atomic_helper_crtc_normalize_zpos, if
I'm not mistaken, it migth be good to point out what the difference is.
I'm also wondering if these normalize_zpos functions should be split to
a separate patch (without the is_omap_plane_dual_overlay call part).
> +static int omap_atomic_update_normalize_zpos(struct drm_device *dev,
> + struct drm_atomic_state *state)
> +{
> + struct drm_crtc *crtc;
> + struct drm_crtc_state *old_state, *new_state;
> + struct drm_plane *plane;
> + int c, i, n, inc;
> + int total_planes = dev->mode_config.num_total_plane;
> + struct drm_plane_state **states;
> + int ret = 0;
> +
> + states = kmalloc_array(total_planes, sizeof(*states), GFP_KERNEL);
> + if (!states)
> + return -ENOMEM;
> +
> + for_each_oldnew_crtc_in_state(state, crtc, old_state, new_state, c) {
> + if (old_state->plane_mask == new_state->plane_mask &&
> + !new_state->zpos_changed)
> + continue;
> +
> + /* Reset plane increment and index value for every crtc */
> + n = 0;
> +
> + /*
> + * Normalization process might create new states for planes
> + * which normalized_zpos has to be recalculated.
> + */
> + drm_for_each_plane_mask(plane, dev, new_state->plane_mask) {
> + struct drm_plane_state *plane_state =
> + drm_atomic_get_plane_state(new_state->state,
> + plane);
> + if (IS_ERR(plane_state)) {
> + ret = PTR_ERR(plane_state);
> + goto done;
> + }
> + states[n++] = plane_state;
> + }
> +
> + sort(states, n, sizeof(*states),
> + drm_atomic_state_normalized_zpos_cmp, NULL);
> +
> + for (i = 0, inc = 0; i < n; i++) {
> + plane = states[i]->plane;
> +
> + states[i]->normalized_zpos = i + inc;
> + DRM_DEBUG_ATOMIC("[PLANE:%d:%s] updated normalized zpos value %d\n",
> + plane->base.id, plane->name,
> + states[i]->normalized_zpos);
> +
> + if (is_omap_plane_dual_overlay(states[i]))
> + inc++;
> + }
> + new_state->zpos_changed = true;
> + }
> +
> +done:
> + kfree(states);
> + return ret;
> +}
> +
> +static int omap_atomic_check(struct drm_device *dev,
> + struct drm_atomic_state *state)
> +{
> + int ret;
> +
> + ret = drm_atomic_helper_check(dev, state);
> + if (ret)
> + return ret;
> +
> + if (dev->mode_config.normalize_zpos) {
> + ret = omap_atomic_update_normalize_zpos(dev, state);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> static const struct drm_mode_config_helper_funcs omap_mode_config_helper_funcs = {
> .atomic_commit_tail = omap_atomic_commit_tail,
> };
> @@ -124,7 +213,7 @@ static const struct drm_mode_config_helper_funcs omap_mode_config_helper_funcs =
> static const struct drm_mode_config_funcs omap_mode_config_funcs = {
> .fb_create = omap_framebuffer_create,
> .output_poll_changed = drm_fb_helper_output_poll_changed,
> - .atomic_check = drm_atomic_helper_check,
> + .atomic_check = omap_atomic_check,
> .atomic_commit = drm_atomic_helper_commit,
> };
>
> diff --git a/drivers/gpu/drm/omapdrm/omap_fb.c b/drivers/gpu/drm/omapdrm/omap_fb.c
> index 190afc564914..895e66b08a81 100644
> --- a/drivers/gpu/drm/omapdrm/omap_fb.c
> +++ b/drivers/gpu/drm/omapdrm/omap_fb.c
> @@ -131,7 +131,9 @@ static u32 drm_rotation_to_tiler(unsigned int drm_rot)
> /* update ovl info for scanout, handles cases of multi-planar fb's, etc.
> */
> void omap_framebuffer_update_scanout(struct drm_framebuffer *fb,
> - struct drm_plane_state *state, struct omap_overlay_info *info)
> + struct drm_plane_state *state,
> + struct omap_overlay_info *info,
> + struct omap_overlay_info *r_info)
> {
> struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
> const struct drm_format_info *format = omap_fb->format;
> @@ -218,6 +220,35 @@ void omap_framebuffer_update_scanout(struct drm_framebuffer *fb,
> } else {
> info->p_uv_addr = 0;
> }
> +
> + if (r_info) {
> + info->width /= 2;
> + info->out_width /= 2;
> +
> + *r_info = *info;
> +
> + if (fb->format->is_yuv) {
> + if (info->width & 1) {
> + info->width++;
> + r_info->width--;
> + }
> +
> + if (info->out_width & 1) {
> + info->out_width++;
> + r_info->out_width--;
> + }
> + }
> +
> + r_info->pos_x = info->pos_x + info->out_width;
> +
> + r_info->paddr = get_linear_addr(fb, format, 0,
> + x + info->width, y);
> + if (fb->format->format == DRM_FORMAT_NV12) {
> + r_info->p_uv_addr =
> + get_linear_addr(fb, format, 1,
> + x + info->width, y);
> + }
> + }
> }
>
> /* pin, prepare for scanout: */
> diff --git a/drivers/gpu/drm/omapdrm/omap_fb.h b/drivers/gpu/drm/omapdrm/omap_fb.h
> index c0e19aed8220..b75f0b5ef1d8 100644
> --- a/drivers/gpu/drm/omapdrm/omap_fb.h
> +++ b/drivers/gpu/drm/omapdrm/omap_fb.h
> @@ -26,7 +26,9 @@ struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev,
> int omap_framebuffer_pin(struct drm_framebuffer *fb);
> void omap_framebuffer_unpin(struct drm_framebuffer *fb);
> void omap_framebuffer_update_scanout(struct drm_framebuffer *fb,
> - struct drm_plane_state *state, struct omap_overlay_info *info);
> + struct drm_plane_state *state,
> + struct omap_overlay_info *info,
> + struct omap_overlay_info *r_info);
> bool omap_framebuffer_supports_rotation(struct drm_framebuffer *fb);
> void omap_framebuffer_describe(struct drm_framebuffer *fb, struct seq_file *m);
>
> diff --git a/drivers/gpu/drm/omapdrm/omap_overlay.c b/drivers/gpu/drm/omapdrm/omap_overlay.c
> index afb2b44fdf86..10730c9b2752 100644
> --- a/drivers/gpu/drm/omapdrm/omap_overlay.c
> +++ b/drivers/gpu/drm/omapdrm/omap_overlay.c
> @@ -67,12 +67,13 @@ omap_plane_find_free_overlay(struct drm_device *dev, struct drm_plane *hwoverlay
> * next global overlay_map to be enabled when atomic transaction is valid.
> */
> int omap_overlay_assign(struct drm_atomic_state *s, struct drm_plane *plane,
> - u32 caps, u32 fourcc, struct omap_hw_overlay **overlay)
> + u32 caps, u32 fourcc, struct omap_hw_overlay **overlay,
> + struct omap_hw_overlay **r_overlay)
> {
> /* Get the global state of the current atomic transaction */
> struct omap_global_state *state = omap_get_global_state(s);
> struct drm_plane **overlay_map = state->hwoverlay_to_plane;
> - struct omap_hw_overlay *ovl;
> + struct omap_hw_overlay *ovl, *r_ovl;
>
> ovl = omap_plane_find_free_overlay(s->dev, overlay_map, caps, fourcc);
> if (!ovl)
> @@ -81,8 +82,26 @@ int omap_overlay_assign(struct drm_atomic_state *s, struct drm_plane *plane,
> overlay_map[ovl->idx] = plane;
> *overlay = ovl;
>
> + if (r_overlay) {
> + r_ovl = omap_plane_find_free_overlay(s->dev, overlay_map,
> + caps, fourcc);
> + if (!r_ovl) {
> + overlay_map[r_ovl->idx] = NULL;
> + *overlay = NULL;
> + return -ENOMEM;
> + }
> +
> + overlay_map[r_ovl->idx] = plane;
> + *r_overlay = r_ovl;
> + }
> +
> DBG("%s: assign to plane %s caps %x", ovl->name, plane->name, caps);
>
> + if (r_overlay) {
> + DBG("%s: assign to right of plane %s caps %x",
> + r_ovl->name, plane->name, caps);
> + }
> +
> return 0;
> }
>
> diff --git a/drivers/gpu/drm/omapdrm/omap_overlay.h b/drivers/gpu/drm/omapdrm/omap_overlay.h
> index 38ca55e1e2d7..e36a43f35563 100644
> --- a/drivers/gpu/drm/omapdrm/omap_overlay.h
> +++ b/drivers/gpu/drm/omapdrm/omap_overlay.h
> @@ -28,7 +28,8 @@ struct omap_hw_overlay {
> int omap_hwoverlays_init(struct omap_drm_private *priv);
> void omap_hwoverlays_destroy(struct omap_drm_private *priv);
> int omap_overlay_assign(struct drm_atomic_state *s, struct drm_plane *plane,
> - u32 caps, u32 fourcc, struct omap_hw_overlay **overlay);
> + u32 caps, u32 fourcc, struct omap_hw_overlay **overlay,
> + struct omap_hw_overlay **r_overlay);
> void omap_overlay_release(struct drm_atomic_state *s, struct omap_hw_overlay *overlay);
> void omap_overlay_update_state(struct omap_drm_private *priv, struct omap_hw_overlay *overlay);
> #endif /* __OMAPDRM_OVERLAY_H__ */
> diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
> index 5001c8354e4f..15cdff988dbc 100644
> --- a/drivers/gpu/drm/omapdrm/omap_plane.c
> +++ b/drivers/gpu/drm/omapdrm/omap_plane.c
> @@ -24,6 +24,7 @@ struct omap_plane_state {
> struct drm_plane_state base;
>
> struct omap_hw_overlay *overlay;
> + struct omap_hw_overlay *r_overlay; /* right overlay */
> };
>
> #define to_omap_plane(x) container_of(x, struct omap_plane, base)
> @@ -33,6 +34,13 @@ struct omap_plane {
> enum omap_plane_id id;
> };
>
> +bool is_omap_plane_dual_overlay(struct drm_plane_state *state)
> +{
> + struct omap_plane_state *omap_state = to_omap_plane_state(state);
> +
> + return !!omap_state->r_overlay;
> +}
> +
> static int omap_plane_prepare_fb(struct drm_plane *plane,
> struct drm_plane_state *new_state)
> {
> @@ -61,16 +69,21 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
> plane);
> struct omap_plane_state *new_omap_state;
> struct omap_plane_state *old_omap_state;
> - struct omap_overlay_info info;
> - enum omap_plane_id ovl_id;
> + struct omap_overlay_info info, r_info;
> + enum omap_plane_id ovl_id, r_ovl_id;
> int ret;
> + bool dual_ovl;
>
> new_omap_state = to_omap_plane_state(new_state);
> old_omap_state = to_omap_plane_state(old_state);
>
> + dual_ovl = is_omap_plane_dual_overlay(new_state);
> +
> /* Cleanup previously held overlay if needed */
> if (old_omap_state->overlay)
> omap_overlay_update_state(priv, old_omap_state->overlay);
> + if (old_omap_state->r_overlay)
> + omap_overlay_update_state(priv, old_omap_state->r_overlay);
>
> if (!new_omap_state->overlay) {
> DBG("[PLANE:%d:%s] no overlay attached", plane->base.id, plane->name);
> @@ -93,8 +106,11 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
> info.color_encoding = new_state->color_encoding;
> info.color_range = new_state->color_range;
>
> + r_info = info;
> +
> /* update scanout: */
> - omap_framebuffer_update_scanout(new_state->fb, new_state, &info);
> + omap_framebuffer_update_scanout(new_state->fb, new_state, &info,
> + dual_ovl ? &r_info : NULL);
>
> DBG("%s: %dx%d -> %dx%d (%d)",
> new_omap_state->overlay->name, info.width, info.height,
> @@ -102,6 +118,23 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
> DBG("%d,%d %pad %pad", info.pos_x, info.pos_y,
> &info.paddr, &info.p_uv_addr);
>
> + if (dual_ovl) {
> + r_ovl_id = new_omap_state->r_overlay->id;
> + /*
> + * If the current plane uses 2 hw planes the very next
> + * zorder is used by the r_overlay so we just use the
> + * main overlay zorder + 1
> + */
> + r_info.zorder = info.zorder + 1;
> +
> + DBG("%s: %dx%d -> %dx%d (%d)",
> + new_omap_state->r_overlay->name,
> + r_info.width, r_info.height,
> + r_info.out_width, r_info.out_height, r_info.screen_width);
> + DBG("%d,%d %pad %pad", r_info.pos_x, r_info.pos_y,
> + &r_info.paddr, &r_info.p_uv_addr);
> + }
> +
> /* and finally, update omapdss: */
> ret = dispc_ovl_setup(priv->dispc, ovl_id, &info,
> omap_crtc_timings(new_state->crtc), false,
> @@ -114,6 +147,21 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
> }
>
> dispc_ovl_enable(priv->dispc, ovl_id, true);
> +
> + if (dual_ovl) {
> + ret = dispc_ovl_setup(priv->dispc, r_ovl_id, &r_info,
> + omap_crtc_timings(new_state->crtc), false,
> + omap_crtc_channel(new_state->crtc));
> + if (ret) {
> + dev_err(plane->dev->dev, "Failed to setup plane right-overlay %s\n",
> + plane->name);
> + dispc_ovl_enable(priv->dispc, r_ovl_id, false);
> + dispc_ovl_enable(priv->dispc, ovl_id, false);
> + return;
> + }
> +
> + dispc_ovl_enable(priv->dispc, r_ovl_id, true);
> + }
> }
>
> static void omap_plane_atomic_disable(struct drm_plane *plane,
> @@ -139,6 +187,11 @@ static void omap_plane_atomic_disable(struct drm_plane *plane,
>
> omap_overlay_update_state(priv, old_omap_state->overlay);
> new_omap_state->overlay = NULL;
> +
> + if (is_omap_plane_dual_overlay(old_state)) {
> + omap_overlay_update_state(priv, old_omap_state->r_overlay);
> + new_omap_state->r_overlay = NULL;
> + }
> }
>
> #define FRAC_16_16(mult, div) (((mult) << 16) / (div))
> @@ -154,6 +207,7 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
> struct omap_plane_state *omap_state = to_omap_plane_state(new_plane_state);
> struct omap_global_state *omap_overlay_global_state;
> struct drm_crtc_state *crtc_state;
> + bool new_r_hw_overlay = false;
> bool new_hw_overlay = false;
> u32 max_width, max_height;
> struct drm_crtc *crtc;
> @@ -196,7 +250,9 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
>
> if (!new_plane_state->visible) {
> omap_overlay_release(state, omap_state->overlay);
> + omap_overlay_release(state, omap_state->r_overlay);
> omap_state->overlay = NULL;
> + omap_state->r_overlay = NULL;
> return 0;
> }
>
> @@ -213,8 +269,30 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
> if (new_plane_state->src_h > max_height || new_plane_state->crtc_h > height)
> return -EINVAL;
>
> - if (new_plane_state->src_w > max_width || new_plane_state->crtc_w > width)
> - return -EINVAL;
> +
> + if (new_plane_state->src_w > max_width || new_plane_state->crtc_w > width) {
> + bool is_fourcc_yuv = new_plane_state->fb->format->is_yuv;
> +
> + if (is_fourcc_yuv && (((new_plane_state->src_w >> 16) / 2 & 1) ||
> + new_plane_state->crtc_w / 2 & 1)) {
> + /*
> + * When calculating the split overlay width
> + * and it yield an odd value we will need to adjust
> + * the indivual width +/- 1. So make sure it fits
> + */
> + if (new_plane_state->src_w <= ((2 * width - 1) << 16) &&
> + new_plane_state->crtc_w <= (2 * width - 1))
> + new_r_hw_overlay = true;
> + else
> + return -EINVAL;
> + } else {
> + if (new_plane_state->src_w <= (2 * max_width) &&
> + new_plane_state->crtc_w <= (2 * width))
> + new_r_hw_overlay = true;
> + else
> + return -EINVAL;
> + }
> + }
>
> if (new_plane_state->rotation != DRM_MODE_ROTATE_0 &&
> !omap_framebuffer_supports_rotation(new_plane_state->fb))
> @@ -239,24 +317,44 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
> new_hw_overlay = true;
> }
>
> + /*
> + * check if we need two overlays and only have 1 or
> + * if we had 2 overlays but will only need 1
> + */
> + if ((new_r_hw_overlay && !omap_state->r_overlay) ||
> + (!new_r_hw_overlay && omap_state->r_overlay))
> + new_hw_overlay = true;
Is this 'new_hw_overlay' variable more like... "reassign_hw_overlays"
after this patch?
> if (new_hw_overlay) {
> struct omap_hw_overlay *old_ovl = omap_state->overlay;
> + struct omap_hw_overlay *old_r_ovl = omap_state->r_overlay;
> struct omap_hw_overlay *new_ovl = NULL;
> + struct omap_hw_overlay *new_r_ovl = NULL;
>
> omap_overlay_release(state, old_ovl);
> + omap_overlay_release(state, old_r_ovl);
>
> - ret = omap_overlay_assign(state, plane, caps, fourcc, &new_ovl);
> + ret = omap_overlay_assign(state, plane, caps, fourcc, &new_ovl,
> + new_r_hw_overlay ? &new_r_ovl : NULL);
> if (ret) {
> DBG("%s: failed to assign hw_overlay", plane->name);
> omap_state->overlay = NULL;
> + omap_state->r_overlay = NULL;
> return ret;
> }
>
> omap_state->overlay = new_ovl;
> + if (new_r_hw_overlay)
> + omap_state->r_overlay = new_r_ovl;
> + else
> + omap_state->r_overlay = NULL;
> }
>
> DBG("plane: %s overlay_id: %d", plane->name, omap_state->overlay->id);
>
> + if (omap_state->r_overlay)
> + DBG("plane: %s r_overlay_id: %d", plane->name, omap_state->r_overlay->id);
> +
> return 0;
> }
>
> @@ -344,6 +442,7 @@ omap_plane_atomic_duplicate_state(struct drm_plane *plane)
> __drm_atomic_helper_plane_duplicate_state(plane, &state->base);
>
> state->overlay = current_state->overlay;
> + state->r_overlay = current_state->r_overlay;
>
> return &state->base;
> }
> @@ -361,6 +460,15 @@ static void omap_plane_atomic_print_state(struct drm_printer *p,
> omap_state->overlay->id);
> drm_printf(p, "\t\tcaps=0x%x\n", omap_state->overlay->caps);
> }
> +
> + drm_printf(p, "\tr_overlay=%s\n", omap_state->r_overlay ?
> + omap_state->r_overlay->name : "(null)");
> + if (omap_state->r_overlay) {
> + drm_printf(p, "\t\tidx=%d\n", omap_state->r_overlay->idx);
> + drm_printf(p, "\t\toverlay_id=%d\n",
> + omap_state->r_overlay->id);
> + drm_printf(p, "\t\tcaps=0x%x\n", omap_state->r_overlay->caps);
> + }
> }
>
> static int omap_plane_atomic_set_property(struct drm_plane *plane,
> diff --git a/drivers/gpu/drm/omapdrm/omap_plane.h b/drivers/gpu/drm/omapdrm/omap_plane.h
> index 0c28fe8ffa20..a9a33e12722a 100644
> --- a/drivers/gpu/drm/omapdrm/omap_plane.h
> +++ b/drivers/gpu/drm/omapdrm/omap_plane.h
> @@ -22,5 +22,6 @@ struct drm_plane *omap_plane_init(struct drm_device *dev,
> u32 possible_crtcs);
> void omap_plane_install_properties(struct drm_plane *plane,
> struct drm_mode_object *obj);
> +bool is_omap_plane_dual_overlay(struct drm_plane_state *state);
>
> #endif /* __OMAPDRM_PLANE_H__ */
>
More information about the dri-devel
mailing list