[PATCH] drm/i915: Add NO_VLV_DISP_PW_DPIO_CMN_BC_INIT quirk
Jani Nikula
jani.nikula at linux.intel.com
Mon Oct 25 08:25:18 UTC 2021
On Sun, 24 Oct 2021, Hans de Goede <hdegoede at redhat.com> wrote:
> Add a NO_VLV_DISP_PW_DPIO_CMN_BC_INIT quirk to fix i915 not working on
> the Xiaomi Mi Pad 2 (with CHT x5-Z8500 SoC).
>
> The Xiaomi Mi Pad 2 uses quite an unusual hardware-design for a Cherry
> Trail tablet. It deviates from the typical reference design based tablets
> in many ways.
>
> The Mi Pad 2 does not have any DisplayPort or HDMI outouts. I suspect that
> as part of its unusual design it also has some supply rail which is only
> used for DisplayPort or HDMI not connected.
>
> Force-enabling the dpio-common-bc powerwell as the i915 normal does at boot
> appears to cause the P-Unit to hang. When booting with a serial-usb console
> the following errors are logged before the system freezes:
>
> i915 0000:00:02.0: [drm] *ERROR* timeout setting power well state 00000000 (fffff3ff)
> i915 0000:00:02.0: [drm] *ERROR* Display PHY 0 is not power up
> ------------[ cut here ]------------
> i915 0000:00:02.0: DPIO read pipe A reg 0x8170 == 0xffffffff
> WARNING: CPU: 3 PID: 258 at drivers/gpu/drm/i915/intel_sideband.c:257 vlv_dpio_read+0x95/0xb0 [i915]
> ...
> Call Trace:
> chv_dpio_cmn_power_well_enable+0xab/0x210 [i915]
> __intel_display_power_get_domain.part.0+0xa0/0xc0 [i915]
> intel_power_domains_init_hw+0x26d/0x760 [i915]
> intel_modeset_init_noirq+0x5d/0x270 [i915]
> i915_driver_probe+0x6b6/0xd10 [i915]
> ...
>
> If I disable the WARN about the register being 0xffffffff, so that the
> system can log some more dmesg output over the serial console before
> freezing, the following errors are also logged:
>
> i915 0000:00:02.0: [drm] *ERROR* timeout setting power well state 00000000 (fcfff3ff)
> i915 0000:00:02.0: [drm] *ERROR* Display PHY 1 is not power up
>
> With this patch to disable the force-enabling of the PHY 0 / dpio-common-bc
> powerwell in place, this error for PHY 1 goes away. So it seems that trying
> the force-enabling of the PHY 0 / dpio-common-bc powerwell freezes the
> P-Unit, causing the subsequent enabling of PHY 1 to also fail (and causing
> the entire system to freeze within seconds).
>
> With this patch the PHY 1 error disappears and the entire system works.
>
> Note this change also moves the intel_init_quirks() call a bit up inside
> intel_modeset_init_noirq() this is necessary so that the quirk is set
> before the intel_power_domains_init_hw() call. This is harmless, all that
> intel_init_quirks() does is set some bits in drm_i915_private.quirks and
> make some drm_info() log calls.
>
> Reported-by: Tsuchiya Yuto <kitakar at gmail.com>
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 4 ++--
> .../gpu/drm/i915/display/intel_display_power.c | 16 ++++++++++++++--
> drivers/gpu/drm/i915/display/intel_quirks.c | 10 ++++++++++
> drivers/gpu/drm/i915/i915_drv.h | 1 +
> 4 files changed, 27 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 015854b5078c..1fb885cc86c9 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -12467,6 +12467,8 @@ int intel_modeset_init_noirq(struct drm_i915_private *i915)
> if (ret)
> goto cleanup_bios;
>
> + intel_init_quirks(i915);
> +
> /* FIXME: completely on the wrong abstraction layer */
> intel_power_domains_init_hw(i915, false);
>
> @@ -12501,8 +12503,6 @@ int intel_modeset_init_noirq(struct drm_i915_private *i915)
> INIT_WORK(&i915->atomic_helper.free_work,
> intel_atomic_helper_free_state_worker);
>
> - intel_init_quirks(i915);
> -
> intel_fbc_init(i915);
>
> return 0;
> diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
> index cce1a926fcc1..eeaba3dc064b 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_power.c
> +++ b/drivers/gpu/drm/i915/display/intel_display_power.c
> @@ -2090,8 +2090,14 @@ __intel_display_power_get_domain(struct drm_i915_private *dev_priv,
> if (intel_display_power_grab_async_put_ref(dev_priv, domain))
> return;
>
> - for_each_power_domain_well(dev_priv, power_well, BIT_ULL(domain))
> + for_each_power_domain_well(dev_priv, power_well, BIT_ULL(domain)) {
> + if (domain == POWER_DOMAIN_INIT &&
> + (dev_priv->quirks & QUIRK_NO_VLV_DISP_PW_DPIO_CMN_BC_INIT) &&
> + power_well->desc->id == VLV_DISP_PW_DPIO_CMN_BC)
> + continue;
> +
> intel_power_well_get(dev_priv, power_well);
> + }
Cc: Imre
There has got to be a way to hide this better. Having this here is
unacceptable.
BR,
Jani.
>
> power_domains->domain_use_count[domain]++;
> }
> @@ -2184,8 +2190,14 @@ __intel_display_power_put_domain(struct drm_i915_private *dev_priv,
>
> power_domains->domain_use_count[domain]--;
>
> - for_each_power_domain_well_reverse(dev_priv, power_well, BIT_ULL(domain))
> + for_each_power_domain_well_reverse(dev_priv, power_well, BIT_ULL(domain)) {
> + if (domain == POWER_DOMAIN_INIT &&
> + (dev_priv->quirks & QUIRK_NO_VLV_DISP_PW_DPIO_CMN_BC_INIT) &&
> + power_well->desc->id == VLV_DISP_PW_DPIO_CMN_BC)
> + continue;
> +
> intel_power_well_put(dev_priv, power_well);
> + }
> }
>
> static void __intel_display_power_put(struct drm_i915_private *dev_priv,
> diff --git a/drivers/gpu/drm/i915/display/intel_quirks.c b/drivers/gpu/drm/i915/display/intel_quirks.c
> index 8a52b7a16774..c377f515bbf4 100644
> --- a/drivers/gpu/drm/i915/display/intel_quirks.c
> +++ b/drivers/gpu/drm/i915/display/intel_quirks.c
> @@ -59,6 +59,13 @@ static void quirk_no_pps_backlight_power_hook(struct drm_i915_private *i915)
> drm_info(&i915->drm, "Applying no pps backlight power quirk\n");
> }
>
> +/* The Xiaomi Mi Pad 2 CHT tablet hangs on enabling the dpio-common-bc well */
> +static void quirk_no_vlv_disp_pw_dpio_cmn_bc_init(struct drm_i915_private *i915)
> +{
> + i915->quirks |= QUIRK_NO_VLV_DISP_PW_DPIO_CMN_BC_INIT;
> + drm_info(&i915->drm, "Applying no dpio-common-bc powerwell init quirk\n");
> +}
> +
> struct intel_quirk {
> int device;
> int subsystem_vendor;
> @@ -190,6 +197,9 @@ static struct intel_quirk intel_quirks[] = {
> /* ASRock ITX*/
> { 0x3185, 0x1849, 0x2212, quirk_increase_ddi_disabled_time },
> { 0x3184, 0x1849, 0x2212, quirk_increase_ddi_disabled_time },
> +
> + /* Xiaomi Mi Pad 2 */
> + { 0x22b0, 0x1d72, 0x1502, quirk_no_vlv_disp_pw_dpio_cmn_bc_init },
> };
>
> void intel_init_quirks(struct drm_i915_private *i915)
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 005b1cec7007..b907b49b4f0e 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -524,6 +524,7 @@ struct i915_drrs {
> #define QUIRK_INCREASE_T12_DELAY (1<<6)
> #define QUIRK_INCREASE_DDI_DISABLED_TIME (1<<7)
> #define QUIRK_NO_PPS_BACKLIGHT_POWER_HOOK (1<<8)
> +#define QUIRK_NO_VLV_DISP_PW_DPIO_CMN_BC_INIT (1<<9)
>
> struct intel_fbdev;
> struct intel_fbc_work;
--
Jani Nikula, Intel Open Source Graphics Center
More information about the dri-devel
mailing list