[PATCH] drm/i915: Add NO_VLV_DISP_PW_DPIO_CMN_BC_INIT quirk
Hans de Goede
hdegoede at redhat.com
Mon Oct 25 09:15:35 UTC 2021
Hi,
On 10/25/21 10:25, Jani Nikula wrote:
> On Sun, 24 Oct 2021, Hans de Goede <hdegoede at redhat.com> wrote:
>> Add a NO_VLV_DISP_PW_DPIO_CMN_BC_INIT quirk to fix i915 not working on
>> the Xiaomi Mi Pad 2 (with CHT x5-Z8500 SoC).
>>
>> The Xiaomi Mi Pad 2 uses quite an unusual hardware-design for a Cherry
>> Trail tablet. It deviates from the typical reference design based tablets
>> in many ways.
>>
>> The Mi Pad 2 does not have any DisplayPort or HDMI outouts. I suspect that
>> as part of its unusual design it also has some supply rail which is only
>> used for DisplayPort or HDMI not connected.
>>
>> Force-enabling the dpio-common-bc powerwell as the i915 normal does at boot
>> appears to cause the P-Unit to hang. When booting with a serial-usb console
>> the following errors are logged before the system freezes:
>>
>> i915 0000:00:02.0: [drm] *ERROR* timeout setting power well state 00000000 (fffff3ff)
>> i915 0000:00:02.0: [drm] *ERROR* Display PHY 0 is not power up
>> ------------[ cut here ]------------
>> i915 0000:00:02.0: DPIO read pipe A reg 0x8170 == 0xffffffff
>> WARNING: CPU: 3 PID: 258 at drivers/gpu/drm/i915/intel_sideband.c:257 vlv_dpio_read+0x95/0xb0 [i915]
>> ...
>> Call Trace:
>> chv_dpio_cmn_power_well_enable+0xab/0x210 [i915]
>> __intel_display_power_get_domain.part.0+0xa0/0xc0 [i915]
>> intel_power_domains_init_hw+0x26d/0x760 [i915]
>> intel_modeset_init_noirq+0x5d/0x270 [i915]
>> i915_driver_probe+0x6b6/0xd10 [i915]
>> ...
>>
>> If I disable the WARN about the register being 0xffffffff, so that the
>> system can log some more dmesg output over the serial console before
>> freezing, the following errors are also logged:
>>
>> i915 0000:00:02.0: [drm] *ERROR* timeout setting power well state 00000000 (fcfff3ff)
>> i915 0000:00:02.0: [drm] *ERROR* Display PHY 1 is not power up
>>
>> With this patch to disable the force-enabling of the PHY 0 / dpio-common-bc
>> powerwell in place, this error for PHY 1 goes away. So it seems that trying
>> the force-enabling of the PHY 0 / dpio-common-bc powerwell freezes the
>> P-Unit, causing the subsequent enabling of PHY 1 to also fail (and causing
>> the entire system to freeze within seconds).
>>
>> With this patch the PHY 1 error disappears and the entire system works.
>>
>> Note this change also moves the intel_init_quirks() call a bit up inside
>> intel_modeset_init_noirq() this is necessary so that the quirk is set
>> before the intel_power_domains_init_hw() call. This is harmless, all that
>> intel_init_quirks() does is set some bits in drm_i915_private.quirks and
>> make some drm_info() log calls.
>>
>> Reported-by: Tsuchiya Yuto <kitakar at gmail.com>
>> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
>> ---
>> drivers/gpu/drm/i915/display/intel_display.c | 4 ++--
>> .../gpu/drm/i915/display/intel_display_power.c | 16 ++++++++++++++--
>> drivers/gpu/drm/i915/display/intel_quirks.c | 10 ++++++++++
>> drivers/gpu/drm/i915/i915_drv.h | 1 +
>> 4 files changed, 27 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
>> index 015854b5078c..1fb885cc86c9 100644
>> --- a/drivers/gpu/drm/i915/display/intel_display.c
>> +++ b/drivers/gpu/drm/i915/display/intel_display.c
>> @@ -12467,6 +12467,8 @@ int intel_modeset_init_noirq(struct drm_i915_private *i915)
>> if (ret)
>> goto cleanup_bios;
>>
>> + intel_init_quirks(i915);
>> +
>> /* FIXME: completely on the wrong abstraction layer */
>> intel_power_domains_init_hw(i915, false);
>>
>> @@ -12501,8 +12503,6 @@ int intel_modeset_init_noirq(struct drm_i915_private *i915)
>> INIT_WORK(&i915->atomic_helper.free_work,
>> intel_atomic_helper_free_state_worker);
>>
>> - intel_init_quirks(i915);
>> -
>> intel_fbc_init(i915);
>>
>> return 0;
>> diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
>> index cce1a926fcc1..eeaba3dc064b 100644
>> --- a/drivers/gpu/drm/i915/display/intel_display_power.c
>> +++ b/drivers/gpu/drm/i915/display/intel_display_power.c
>> @@ -2090,8 +2090,14 @@ __intel_display_power_get_domain(struct drm_i915_private *dev_priv,
>> if (intel_display_power_grab_async_put_ref(dev_priv, domain))
>> return;
>>
>> - for_each_power_domain_well(dev_priv, power_well, BIT_ULL(domain))
>> + for_each_power_domain_well(dev_priv, power_well, BIT_ULL(domain)) {
>> + if (domain == POWER_DOMAIN_INIT &&
>> + (dev_priv->quirks & QUIRK_NO_VLV_DISP_PW_DPIO_CMN_BC_INIT) &&
>> + power_well->desc->id == VLV_DISP_PW_DPIO_CMN_BC)
>> + continue;
>> +
>> intel_power_well_get(dev_priv, power_well);
>> + }
>
> Cc: Imre
>
> There has got to be a way to hide this better. Having this here is
> unacceptable.
Thank you for your quick review.
For a first quick hack I just removed POWER_DOMAIN_INIT from
CHV_DPIO_CMN_BC_POWER_DOMAINS.
Some alternative ideas:
1. Mask out the POWER_DOMAIN_INIT bit from desc->domains
But that requires making the desc struct non const; Or storing a
copy of the domains field in struct i915_power_well and masking it
out in the copy (and make for_each_power_domain_well use the copy).
2. Have a separate desc without POWER_DOMAIN_INIT and patch up the
power_well->desc pointer in intel_power_domains_init().
I believe that 1. will be slightly cleaner (with the domains
mask copy added to struct i915_power_well).
If this sounds like it might be acceptable I can give 1. a shot
(or 2 if that is preferred). So does 1. sound acceptable ?
Regards,
Hans
>> power_domains->domain_use_count[domain]++;
>> }
>> @@ -2184,8 +2190,14 @@ __intel_display_power_put_domain(struct drm_i915_private *dev_priv,
>>
>> power_domains->domain_use_count[domain]--;
>>
>> - for_each_power_domain_well_reverse(dev_priv, power_well, BIT_ULL(domain))
>> + for_each_power_domain_well_reverse(dev_priv, power_well, BIT_ULL(domain)) {
>> + if (domain == POWER_DOMAIN_INIT &&
>> + (dev_priv->quirks & QUIRK_NO_VLV_DISP_PW_DPIO_CMN_BC_INIT) &&
>> + power_well->desc->id == VLV_DISP_PW_DPIO_CMN_BC)
>> + continue;
>> +
>> intel_power_well_put(dev_priv, power_well);
>> + }
>> }
>>
>> static void __intel_display_power_put(struct drm_i915_private *dev_priv,
>> diff --git a/drivers/gpu/drm/i915/display/intel_quirks.c b/drivers/gpu/drm/i915/display/intel_quirks.c
>> index 8a52b7a16774..c377f515bbf4 100644
>> --- a/drivers/gpu/drm/i915/display/intel_quirks.c
>> +++ b/drivers/gpu/drm/i915/display/intel_quirks.c
>> @@ -59,6 +59,13 @@ static void quirk_no_pps_backlight_power_hook(struct drm_i915_private *i915)
>> drm_info(&i915->drm, "Applying no pps backlight power quirk\n");
>> }
>>
>> +/* The Xiaomi Mi Pad 2 CHT tablet hangs on enabling the dpio-common-bc well */
>> +static void quirk_no_vlv_disp_pw_dpio_cmn_bc_init(struct drm_i915_private *i915)
>> +{
>> + i915->quirks |= QUIRK_NO_VLV_DISP_PW_DPIO_CMN_BC_INIT;
>> + drm_info(&i915->drm, "Applying no dpio-common-bc powerwell init quirk\n");
>> +}
>> +
>> struct intel_quirk {
>> int device;
>> int subsystem_vendor;
>> @@ -190,6 +197,9 @@ static struct intel_quirk intel_quirks[] = {
>> /* ASRock ITX*/
>> { 0x3185, 0x1849, 0x2212, quirk_increase_ddi_disabled_time },
>> { 0x3184, 0x1849, 0x2212, quirk_increase_ddi_disabled_time },
>> +
>> + /* Xiaomi Mi Pad 2 */
>> + { 0x22b0, 0x1d72, 0x1502, quirk_no_vlv_disp_pw_dpio_cmn_bc_init },
>> };
>>
>> void intel_init_quirks(struct drm_i915_private *i915)
>> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
>> index 005b1cec7007..b907b49b4f0e 100644
>> --- a/drivers/gpu/drm/i915/i915_drv.h
>> +++ b/drivers/gpu/drm/i915/i915_drv.h
>> @@ -524,6 +524,7 @@ struct i915_drrs {
>> #define QUIRK_INCREASE_T12_DELAY (1<<6)
>> #define QUIRK_INCREASE_DDI_DISABLED_TIME (1<<7)
>> #define QUIRK_NO_PPS_BACKLIGHT_POWER_HOOK (1<<8)
>> +#define QUIRK_NO_VLV_DISP_PW_DPIO_CMN_BC_INIT (1<<9)
>>
>> struct intel_fbdev;
>> struct intel_fbc_work;
>
More information about the dri-devel
mailing list