[PATCH v3 4/4] drm/bridge: ti-sn65dsi83: Add vcc supply regulator support
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Wed Oct 27 23:51:12 UTC 2021
Hi Alexander,
Thank you for the patch.
On Tue, Oct 19, 2021 at 08:52:39AM +0200, Alexander Stein wrote:
> VCC needs to be enabled before releasing the enable GPIO.
>
> Reviewed-by: Sam Ravnborg <sam at ravnborg.org>
> Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> ---
> drivers/gpu/drm/bridge/ti-sn65dsi83.c | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi83.c b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
> index 9072342566f3..c55c45d5d29a 100644
> --- a/drivers/gpu/drm/bridge/ti-sn65dsi83.c
> +++ b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
> @@ -33,6 +33,7 @@
> #include <linux/of_device.h>
> #include <linux/of_graph.h>
> #include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
>
> #include <drm/drm_atomic_helper.h>
> #include <drm/drm_bridge.h>
> @@ -143,6 +144,7 @@ struct sn65dsi83 {
> struct mipi_dsi_device *dsi;
> struct drm_bridge *panel_bridge;
> struct gpio_desc *enable_gpio;
> + struct regulator *vcc;
> int dsi_lanes;
> bool lvds_dual_link;
> bool lvds_dual_link_even_odd_swap;
> @@ -292,6 +294,11 @@ static void sn65dsi83_atomic_pre_enable(struct drm_bridge *bridge,
> struct drm_bridge_state *old_bridge_state)
> {
> struct sn65dsi83 *ctx = bridge_to_sn65dsi83(bridge);
> + int ret;
> +
> + ret = regulator_enable(ctx->vcc);
> + if (ret)
> + dev_err(ctx->dev, "Failed to enable vcc: %i\n", ret);
>
> /*
> * Reset the chip, pull EN line low for t_reset=10ms,
> @@ -536,9 +543,14 @@ static void sn65dsi83_atomic_post_disable(struct drm_bridge *bridge,
> struct drm_bridge_state *old_bridge_state)
> {
> struct sn65dsi83 *ctx = bridge_to_sn65dsi83(bridge);
> + int ret;
>
> /* Put the chip in reset, pull EN line low. */
> gpiod_set_value(ctx->enable_gpio, 0);
> +
> + ret = regulator_disable(ctx->vcc);
> + if (ret)
> + dev_err(ctx->dev, "Failed to disable vcc: %i\n", ret);
> }
>
> static enum drm_mode_status
> @@ -647,6 +659,12 @@ static int sn65dsi83_parse_dt(struct sn65dsi83 *ctx, enum sn65dsi83_model model)
>
> ctx->panel_bridge = panel_bridge;
>
> + ctx->vcc = devm_regulator_get(dev, "vcc");
> + if (IS_ERR(ctx->vcc))
> + return dev_err_probe(dev, PTR_ERR(ctx->vcc),
> + "Failed to get supply 'vcc': %pe\n",
> + ctx->vcc);
> +
> return 0;
> }
>
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list