[PATCH v4 09/13] drm/msm/dp: Don't enable HPD interrupts for edp

[Dmitry Baryshkov]

On 5 December 2022 20:44:29 GMT+03:00, Bjorn Andersson <quic_bjorande at quicinc.com> wrote:
>From: Bjorn Andersson <bjorn.andersson at linaro.org>
>
>Most instances where HPD interrupts are masked and unmasked are guareded
>by the presence of an EDP panel being connected, but not all. Extend
>this to cover the last few places, as HPD interrupt handling is not used
>for the EDP case.

I don't remember whether I asked that or not. Would it be possible to move hpd irq enablement to bridge's hpd_enable() / hpd_disable() callbacks ? I think this would allow us to drop the is_edp checks.

>
>Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
>Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>Signed-off-by: Bjorn Andersson <quic_bjorande at quicinc.com>
>---
>
>Changes since v3:
>- None
>
> drivers/gpu/drm/msm/dp/dp_display.c | 15 ++++++++++-----
> 1 file changed, 10 insertions(+), 5 deletions(-)
>
>diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
>index 17fcf8cd84cd..bb92c33beff8 100644
>--- a/drivers/gpu/drm/msm/dp/dp_display.c
>+++ b/drivers/gpu/drm/msm/dp/dp_display.c
>@@ -610,8 +610,10 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
> 	}
> 
> 	/* enable HDP irq_hpd/replug interrupt */
>-	dp_catalog_hpd_config_intr(dp->catalog,
>-		DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK, true);
>+	if (!dp->dp_display.is_edp)
>+		dp_catalog_hpd_config_intr(dp->catalog,
>+					   DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK,
>+					   true);
> 
> 	drm_dbg_dp(dp->drm_dev, "After, type=%d hpd_state=%d\n",
> 			dp->dp_display.connector_type, state);
>@@ -651,8 +653,10 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
> 			dp->dp_display.connector_type, state);
> 
> 	/* disable irq_hpd/replug interrupts */
>-	dp_catalog_hpd_config_intr(dp->catalog,
>-		DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK, false);
>+	if (!dp->dp_display.is_edp)
>+		dp_catalog_hpd_config_intr(dp->catalog,
>+					   DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK,
>+					   false);
> 
> 	/* unplugged, no more irq_hpd handle */
> 	dp_del_event(dp, EV_IRQ_HPD_INT);
>@@ -678,7 +682,8 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
> 	}
> 
> 	/* disable HPD plug interrupts */
>-	dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, false);
>+	if (!dp->dp_display.is_edp)
>+		dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, false);
> 
> 	/*
> 	 * We don't need separate work for disconnect as

-- 
With best wishes
Dmitry