[PATCH v2 1/3] dt-bindings: phy: qcom,hdmi-phy-qmp: add clock-cells and XO clock

[Rob Herring]

On Mon, Jun 20, 2022 at 04:02:58AM +0300, Dmitry Baryshkov wrote:
> As the QMP HDMI PHY is a clock provider, add constant #clock-cells
> property. For the compatibility with older DTs the property is not
> marked as required. Also add the XO clock to the list of the clocks used
> by the driver.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>  .../devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml | 14 +++++++++++---
>  1 file changed, 11 insertions(+), 3 deletions(-)

Doesn't apply, so no checks ran.

> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml
> index eea2e02678ed..41e6492d4a0f 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml
> @@ -28,12 +28,14 @@ properties:
>        - const: hdmi_phy
>  
>    clocks:
> -    maxItems: 2
> +    minItems: 2
> +    maxItems: 3
>  
>    clock-names:
>      items:
>        - const: iface
>        - const: ref
> +      - const: xo

minItems: 2

>  
>    power-domains:
>      maxItems: 1
> @@ -44,6 +46,9 @@ properties:
>    vddio-supply:
>      description: phandle to VDD I/O supply regulator
>  
> +  '#clock-cells':
> +    const: 0
> +
>    '#phy-cells':
>      const: 0
>  
> @@ -75,9 +80,12 @@ examples:
>                    "hdmi_phy";
>  
>        clocks = <&mmcc 116>,
> -               <&gcc 214>;
> +               <&gcc 214>,
> +               <&xo_board>;
>        clock-names = "iface",
> -                    "ref";
> +                    "ref",
> +                    "xo";
> +      #clock-cells = <0>;
>        #phy-cells = <0>;
>  
>        vddio-supply = <&vreg_l12a_1p8>;
> -- 
> 2.35.1
> 
>