[PATCH v2 1/3] dt-bindings: phy: qcom,hdmi-phy-qmp: add clock-cells and XO clock

[Dmitry Baryshkov]

On Mon, 27 Jun 2022 at 20:17, Rob Herring <robh at kernel.org> wrote:
>
> On Mon, Jun 20, 2022 at 04:02:58AM +0300, Dmitry Baryshkov wrote:
> > As the QMP HDMI PHY is a clock provider, add constant #clock-cells
> > property. For the compatibility with older DTs the property is not
> > marked as required. Also add the XO clock to the list of the clocks used
> > by the driver.
> >
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> > ---
> >  .../devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml | 14 +++++++++++---
> >  1 file changed, 11 insertions(+), 3 deletions(-)
>
> Doesn't apply, so no checks ran.

Dependencies: https://patchwork.freedesktop.org/series/105285/. I'll
include this in v3.

>
> >
> > diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml
> > index eea2e02678ed..41e6492d4a0f 100644
> > --- a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml
> > +++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml
> > @@ -28,12 +28,14 @@ properties:
> >        - const: hdmi_phy
> >
> >    clocks:
> > -    maxItems: 2
> > +    minItems: 2
> > +    maxItems: 3
> >
> >    clock-names:
> >      items:
> >        - const: iface
> >        - const: ref
> > +      - const: xo
>
> minItems: 2

Ack

>
> >
> >    power-domains:
> >      maxItems: 1
> > @@ -44,6 +46,9 @@ properties:
> >    vddio-supply:
> >      description: phandle to VDD I/O supply regulator
> >
> > +  '#clock-cells':
> > +    const: 0
> > +
> >    '#phy-cells':
> >      const: 0
> >
> > @@ -75,9 +80,12 @@ examples:
> >                    "hdmi_phy";
> >
> >        clocks = <&mmcc 116>,
> > -               <&gcc 214>;
> > +               <&gcc 214>,
> > +               <&xo_board>;
> >        clock-names = "iface",
> > -                    "ref";
> > +                    "ref",
> > +                    "xo";
> > +      #clock-cells = <0>;
> >        #phy-cells = <0>;
> >
> >        vddio-supply = <&vreg_l12a_1p8>;
> > --
> > 2.35.1
> >
> >



-- 
With best wishes
Dmitry