[PATCH v8 08/16] drm/meson: dw-hdmi: Don't open code devm_clk_get_enabled()

Uwe Kleine-König u.kleine-koenig at pengutronix.de
Mon Mar 14 14:16:35 UTC 2022


devm_clk_get_enabled() returns a clock prepared and enabled and already
registers a devm exit handler to disable (and unprepare) the clock.

There is slight change in behavior as a failure to enable the clock
now results in an error message, too. Also the actual error code is added
to the message.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 drivers/gpu/drm/meson/meson_dw_hdmi.c | 48 +++++++++------------------
 1 file changed, 16 insertions(+), 32 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 5cd2b2ebbbd3..6034e80c5b2e 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -670,29 +670,6 @@ static void meson_disable_regulator(void *data)
 	regulator_disable(data);
 }
 
-static void meson_disable_clk(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
-static int meson_enable_clk(struct device *dev, char *name)
-{
-	struct clk *clk;
-	int ret;
-
-	clk = devm_clk_get(dev, name);
-	if (IS_ERR(clk)) {
-		dev_err(dev, "Unable to get %s pclk\n", name);
-		return PTR_ERR(clk);
-	}
-
-	ret = clk_prepare_enable(clk);
-	if (!ret)
-		ret = devm_add_action_or_reset(dev, meson_disable_clk, clk);
-
-	return ret;
-}
-
 static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
 				void *data)
 {
@@ -702,6 +679,7 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
 	struct drm_device *drm = data;
 	struct meson_drm *priv = drm->dev_private;
 	struct dw_hdmi_plat_data *dw_plat_data;
+	struct clk *clk;
 	int irq;
 	int ret;
 
@@ -763,17 +741,23 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
 	if (IS_ERR(meson_dw_hdmi->hdmitx))
 		return PTR_ERR(meson_dw_hdmi->hdmitx);
 
-	ret = meson_enable_clk(dev, "isfr");
-	if (ret)
-		return ret;
+	clk = devm_clk_get_enabled(dev, "isfr");
+	if (IS_ERR(clk)) {
+		dev_err(dev, "Failed to get enabled isfr pclk (%pe)\n", clk);
+		return PTR_ERR(clk);
+	}
 
-	ret = meson_enable_clk(dev, "iahb");
-	if (ret)
-		return ret;
+	clk = devm_clk_get_enabled(dev, "iahb");
+	if (IS_ERR(clk)) {
+		dev_err(dev, "Failed to get enabled iahb pclk (%pe)\n", clk);
+		return PTR_ERR(clk);
+	}
 
-	ret = meson_enable_clk(dev, "venci");
-	if (ret)
-		return ret;
+	clk = devm_clk_get_enabled(dev, "venci");
+	if (IS_ERR(clk)) {
+		dev_err(dev, "Failed to get enabled venci pclk (%pe)\n", clk);
+		return PTR_ERR(clk);
+	}
 
 	dw_plat_data->regm = devm_regmap_init(dev, NULL, meson_dw_hdmi,
 					      &meson_dw_hdmi_regmap_config);
-- 
2.35.1



More information about the dri-devel mailing list