[PATCH v8 08/16] drm/meson: dw-hdmi: Don't open code devm_clk_get_enabled()
Neil Armstrong
narmstrong at baylibre.com
Wed Mar 16 08:33:02 UTC 2022
On 14/03/2022 15:16, Uwe Kleine-König wrote:
> devm_clk_get_enabled() returns a clock prepared and enabled and already
> registers a devm exit handler to disable (and unprepare) the clock.
>
> There is slight change in behavior as a failure to enable the clock
> now results in an error message, too. Also the actual error code is added
> to the message.
>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
> ---
> drivers/gpu/drm/meson/meson_dw_hdmi.c | 48 +++++++++------------------
> 1 file changed, 16 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
> index 5cd2b2ebbbd3..6034e80c5b2e 100644
> --- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
> +++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
> @@ -670,29 +670,6 @@ static void meson_disable_regulator(void *data)
> regulator_disable(data);
> }
>
> -static void meson_disable_clk(void *data)
> -{
> - clk_disable_unprepare(data);
> -}
> -
> -static int meson_enable_clk(struct device *dev, char *name)
> -{
> - struct clk *clk;
> - int ret;
> -
> - clk = devm_clk_get(dev, name);
> - if (IS_ERR(clk)) {
> - dev_err(dev, "Unable to get %s pclk\n", name);
> - return PTR_ERR(clk);
> - }
> -
> - ret = clk_prepare_enable(clk);
> - if (!ret)
> - ret = devm_add_action_or_reset(dev, meson_disable_clk, clk);
> -
> - return ret;
> -}
> -
> static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
> void *data)
> {
> @@ -702,6 +679,7 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
> struct drm_device *drm = data;
> struct meson_drm *priv = drm->dev_private;
> struct dw_hdmi_plat_data *dw_plat_data;
> + struct clk *clk;
> int irq;
> int ret;
>
> @@ -763,17 +741,23 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
> if (IS_ERR(meson_dw_hdmi->hdmitx))
> return PTR_ERR(meson_dw_hdmi->hdmitx);
>
> - ret = meson_enable_clk(dev, "isfr");
> - if (ret)
> - return ret;
> + clk = devm_clk_get_enabled(dev, "isfr");
> + if (IS_ERR(clk)) {
> + dev_err(dev, "Failed to get enabled isfr pclk (%pe)\n", clk);
> + return PTR_ERR(clk);
> + }
>
> - ret = meson_enable_clk(dev, "iahb");
> - if (ret)
> - return ret;
> + clk = devm_clk_get_enabled(dev, "iahb");
> + if (IS_ERR(clk)) {
> + dev_err(dev, "Failed to get enabled iahb pclk (%pe)\n", clk);
> + return PTR_ERR(clk);
> + }
>
> - ret = meson_enable_clk(dev, "venci");
> - if (ret)
> - return ret;
> + clk = devm_clk_get_enabled(dev, "venci");
> + if (IS_ERR(clk)) {
> + dev_err(dev, "Failed to get enabled venci pclk (%pe)\n", clk);
> + return PTR_ERR(clk);
> + }
>
> dw_plat_data->regm = devm_regmap_init(dev, NULL, meson_dw_hdmi,
> &meson_dw_hdmi_regmap_config);
Acked-by: Neil Armstrong <narmstrong at baylibre.com>
More information about the dri-devel
mailing list