[RESEND PATCH v1] dt-bindings: display/msm: convert MDP5 schema to YAML format

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Thu Nov 3 13:47:43 UTC 2022


On 02/11/2022 18:08, Dmitry Baryshkov wrote:
> Convert the mdp5.txt into the yaml format. Changes to the existing (txt) schema:
>  - MSM8996 has additional "iommu" clock, define it separately
>  - Add new properties used on some of platforms:
>    - interconnects, interconnect-names
>    - iommus
>    - power-domains
>    - operating-points-v2, opp-table
> 

Thank you for your patch. There is something to discuss/improve.

> +
> +  clock-names:
> +    oneOf:
> +      - minItems: 4
> +        items:
> +          - const: iface
> +          - const: bus
> +          - const: core
> +          - const: vsync
> +          - const: lut
> +          - const: tbu
> +          - const: tbu_rt
> +        #MSM8996 has additional iommu clock
> +      - items:
> +          - const: iface
> +          - const: bus
> +          - const: core
> +          - const: iommu
> +          - const: vsync
> +
> +  interconnects:
> +    minItems: 1
> +    items:
> +      - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
> +      - description: Interconnect path from mdp1 port to the data bus
> +      - description: Interconnect path from rotator port to the data bus
> +
> +  interconnect-names:
> +    minItems: 1
> +    items:
> +      - const: mdp0-mem
> +      - const: mdp1-mem
> +      - const: rotator-mem
> +
> +  iommus:
> +    items:
> +      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  operating-points-v2: true
> +  opp-table:
> +    type: object
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +    description: |
> +      Contains the list of output ports from DPU device. These ports
> +      connect to interfaces that are external to the DPU hardware,
> +      such as DSI, DP etc.

You could include here information about number of ports per variant.

> +
> +    patternProperties:
> +      "^port@[0-9a-f]+$":

[0-3]

> +        $ref: /schemas/graph.yaml#/properties/port
> +
> +    # at least one port is required
> +    required:
> +      - port at 0
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - clocks
> +  - clock-names
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    mdp at 1a01000 {

display-controller at ......

> +        compatible = "qcom,mdp5";
> +        reg = <0x1a01000 0x90000>;
> +        reg-names = "mdp_phys";
> +

Best regards,
Krzysztof



More information about the dri-devel mailing list