[PATCH v1 5/5] arm64: dts: qcom: sm8450-hdk: Enable HDMI Display

[Dmitry Baryshkov]

From: Vinod Koul <vkoul at kernel.org>

Add the HDMI display nodes and link it to DSI. Also enable missing dispcc
nodes

Signed-off-by: Vinod Koul <vkoul at kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 45 +++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index 9522dd29a38a..f37f226e9b11 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -20,6 +20,17 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
 	lt9611_1v2: lt9611-vdd12-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "LT9611_1V2";
@@ -389,6 +400,26 @@ lt9611_codec: hdmi-bridge at 2b {
 		pinctrl-names = "default";
 		pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
 
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port at 2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
 	};
 };
 
@@ -512,9 +543,23 @@ &mdss_mdp {
 	status = "okay";
 };
 
+&dispcc {
+	status = "okay";
+};
+
 &dsi0 {
 	status = "okay";
 	vdda-supply = <&vreg_l6b_1p2>;
+
+	ports {
+		port at 1 {
+			endpoint {
+				remote-endpoint = <&lt9611_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+
 };
 
 &dsi0_phy {
-- 
2.35.1