[RESEND 3/6 v2] media: uapi: add MEDIA_BUS_FMT_RGB565_1X24_CPADHI

[Hans Verkuil]

On 19/05/2022 18:29, Chris Morgan wrote:
> From: Chris Morgan <macromorgan at hotmail.com>
> 
> Add the MEDIA_BUS_FMT_RGB565_1X24_CPADHI format used by the Geekworm
> MZP280 panel for the Raspberry Pi.
> 
> Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
> ---
>  include/uapi/linux/media-bus-format.h | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/include/uapi/linux/media-bus-format.h b/include/uapi/linux/media-bus-format.h
> index 0dfc11ee2..a7b765498 100644
> --- a/include/uapi/linux/media-bus-format.h
> +++ b/include/uapi/linux/media-bus-format.h
> @@ -34,13 +34,14 @@
>  
>  #define MEDIA_BUS_FMT_FIXED			0x0001
>  
> -/* RGB - next is	0x101e */
> +/* RGB - next is	0x101f */

This would be 0x1023

>  #define MEDIA_BUS_FMT_RGB444_1X12		0x1016
>  #define MEDIA_BUS_FMT_RGB444_2X8_PADHI_BE	0x1001
>  #define MEDIA_BUS_FMT_RGB444_2X8_PADHI_LE	0x1002
>  #define MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE	0x1003
>  #define MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE	0x1004
>  #define MEDIA_BUS_FMT_RGB565_1X16		0x1017
> +#define MEDIA_BUS_FMT_RGB565_1X24_CPADHI	0x101e

and this 0x1022, based on the latest media tree.

>  #define MEDIA_BUS_FMT_BGR565_2X8_BE		0x1005
>  #define MEDIA_BUS_FMT_BGR565_2X8_LE		0x1006
>  #define MEDIA_BUS_FMT_RGB565_2X8_BE		0x1007

Otherwise:

Acked-by: Hans Verkuil <hverkuil-cisco at xs4all.nl>

It's an old series by now, but as far as I am concerned this can go through
the drm subsystem (after updating this value).

Regards,

	Hans