[PATCH] drm/panel/panel-sitronix-st7701: Clean up CMDnBKx selection
Marek Vasut
marex at denx.de
Fri Oct 14 23:10:42 UTC 2022
There are two command register files, CMD1 and CMD2, where only the CMD2
contains additional register sub-files BK0..3 . Pull the register file
selection call into separate function instead of duplicating it all over
the driver. The CMD2BK2 file is undocumented in datasheet, and is used
for BIST. No functional change.
Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Guido Günther <agx at sigxcpu.org>
Cc: Jagan Teki <jagan at amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Cc: Linus Walleij <linus.walleij at linaro.org>
Cc: Sam Ravnborg <sam at ravnborg.org>
Cc: Thierry Reding <thierry.reding at gmail.com>
---
drivers/gpu/drm/panel/panel-sitronix-st7701.c | 58 ++++++++-----------
1 file changed, 25 insertions(+), 33 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7701.c b/drivers/gpu/drm/panel/panel-sitronix-st7701.c
index 9578f461f5e48..baeb952b6e244 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7701.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7701.c
@@ -19,6 +19,9 @@
/* Command2 BKx selection command */
#define DSI_CMD2BKX_SEL 0xFF
+#define DSI_CMD1 0
+#define DSI_CMD2 BIT(4)
+#define DSI_CMD2BK_MASK GENMASK(3, 0)
/* Command2, BK0 commands */
#define DSI_CMD2_BK0_PVGAMCTRL 0xB0 /* Positive Voltage Gamma Control */
@@ -39,21 +42,6 @@
#define DSI_CMD2_BK1_SPD2 0xC2 /* Source EQ2 Setting */
#define DSI_CMD2_BK1_MIPISET1 0xD0 /* MIPI Setting 1 */
-/*
- * Command2 with BK function selection.
- *
- * BIT[4].....CN2
- * BIT[1:0]...BKXSEL
- * 1:00 = CMD2BK0, Command2 BK0
- * 1:01 = CMD2BK1, Command2 BK1
- * 1:11 = CMD2BK3, Command2 BK3
- * 0:00 = Command2 disable
- */
-#define DSI_CMD2BK0_SEL 0x10
-#define DSI_CMD2BK1_SEL 0x11
-#define DSI_CMD2BK3_SEL 0x13
-#define DSI_CMD2BKX_SEL_NONE 0x00
-
/* Command2, BK0 bytes */
#define DSI_CMD2_BK0_GAMCTRL_AJ_MASK GENMASK(7, 6)
#define DSI_CMD2_BK0_GAMCTRL_VC0_MASK GENMASK(3, 0)
@@ -191,6 +179,18 @@ static u8 st7701_vgls_map(struct st7701 *st7701)
return 0;
}
+static void st7701_switch_cmd_bkx(struct st7701 *st7701, bool cmd2, u8 bkx)
+{
+ u8 val;
+
+ if (cmd2)
+ val = DSI_CMD2 | FIELD_PREP(DSI_CMD2BK_MASK, bkx);
+ else
+ val = DSI_CMD1;
+
+ ST7701_DSI(st7701, DSI_CMD2BKX_SEL, 0x77, 0x01, 0x00, 0x00, val);
+}
+
static void st7701_init_sequence(struct st7701 *st7701)
{
const struct st7701_panel_desc *desc = st7701->desc;
@@ -208,8 +208,8 @@ static void st7701_init_sequence(struct st7701 *st7701)
msleep(st7701->sleep_delay);
/* Command2, BK0 */
- ST7701_DSI(st7701, DSI_CMD2BKX_SEL,
- 0x77, 0x01, 0x00, 0x00, DSI_CMD2BK0_SEL);
+ st7701_switch_cmd_bkx(st7701, true, 0);
+
mipi_dsi_dcs_write(st7701->dsi, DSI_CMD2_BK0_PVGAMCTRL,
desc->pv_gamma, ARRAY_SIZE(desc->pv_gamma));
mipi_dsi_dcs_write(st7701->dsi, DSI_CMD2_BK0_NVGAMCTRL,
@@ -247,8 +247,7 @@ static void st7701_init_sequence(struct st7701 *st7701)
(clamp((u32)mode->htotal, 512U, 1008U) - 512) / 16));
/* Command2, BK1 */
- ST7701_DSI(st7701, DSI_CMD2BKX_SEL,
- 0x77, 0x01, 0x00, 0x00, DSI_CMD2BK1_SEL);
+ st7701_switch_cmd_bkx(st7701, true, 1);
/* Vop = 3.5375V + (VRHA[7:0] * 0.0125V) */
ST7701_DSI(st7701, DSI_CMD2_BK1_VRHS,
@@ -373,33 +372,27 @@ static void dmt028vghmcmi_1a_gip_sequence(struct st7701 *st7701)
0x08, 0x08, 0x08, 0x40,
0x3F, 0x64);
- ST7701_DSI(st7701, DSI_CMD2BKX_SEL,
- 0x77, 0x01, 0x00, 0x00, DSI_CMD2BKX_SEL_NONE);
+ st7701_switch_cmd_bkx(st7701, false, 0);
- ST7701_DSI(st7701, DSI_CMD2BKX_SEL,
- 0x77, 0x01, 0x00, 0x00, DSI_CMD2BK3_SEL);
+ st7701_switch_cmd_bkx(st7701, true, 3);
ST7701_DSI(st7701, 0xE6, 0x7C);
ST7701_DSI(st7701, 0xE8, 0x00, 0x0E);
- ST7701_DSI(st7701, DSI_CMD2BKX_SEL,
- 0x77, 0x01, 0x00, 0x00, DSI_CMD2BKX_SEL_NONE);
+ st7701_switch_cmd_bkx(st7701, false, 0);
ST7701_DSI(st7701, 0x11);
msleep(120);
- ST7701_DSI(st7701, DSI_CMD2BKX_SEL,
- 0x77, 0x01, 0x00, 0x00, DSI_CMD2BK3_SEL);
+ st7701_switch_cmd_bkx(st7701, true, 3);
ST7701_DSI(st7701, 0xE8, 0x00, 0x0C);
msleep(10);
ST7701_DSI(st7701, 0xE8, 0x00, 0x00);
- ST7701_DSI(st7701, DSI_CMD2BKX_SEL,
- 0x77, 0x01, 0x00, 0x00, DSI_CMD2BKX_SEL_NONE);
+ st7701_switch_cmd_bkx(st7701, false, 0);
ST7701_DSI(st7701, 0x11);
msleep(120);
ST7701_DSI(st7701, 0xE8, 0x00, 0x00);
- ST7701_DSI(st7701, DSI_CMD2BKX_SEL,
- 0x77, 0x01, 0x00, 0x00, DSI_CMD2BKX_SEL_NONE);
+ st7701_switch_cmd_bkx(st7701, false, 0);
ST7701_DSI(st7701, 0x3A, 0x70);
}
@@ -426,8 +419,7 @@ static int st7701_prepare(struct drm_panel *panel)
st7701->desc->gip_sequence(st7701);
/* Disable Command2 */
- ST7701_DSI(st7701, DSI_CMD2BKX_SEL,
- 0x77, 0x01, 0x00, 0x00, DSI_CMD2BKX_SEL_NONE);
+ st7701_switch_cmd_bkx(st7701, false, 0);
return 0;
}
--
2.35.1
More information about the dri-devel
mailing list