[PATCH v2 08/19] fbdev/metronomefb: Use struct fb_info.screen_buffer
Thomas Zimmermann
tzimmermann at suse.de
Fri Apr 28 12:24:41 UTC 2023
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
---
drivers/video/fbdev/metronomefb.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/video/fbdev/metronomefb.c b/drivers/video/fbdev/metronomefb.c
index 9fd4bb85d735..afa9b41f5a87 100644
--- a/drivers/video/fbdev/metronomefb.c
+++ b/drivers/video/fbdev/metronomefb.c
@@ -438,7 +438,7 @@ static void metronomefb_dpy_update(struct metronomefb_par *par)
{
int fbsize;
u16 cksum;
- unsigned char *buf = (unsigned char __force *)par->info->screen_base;
+ unsigned char *buf = par->info->screen_buffer;
fbsize = par->info->fix.smem_len;
/* copy from vm to metromem */
@@ -453,7 +453,7 @@ static u16 metronomefb_dpy_update_page(struct metronomefb_par *par, int index)
{
int i;
u16 csum = 0;
- u16 *buf = (u16 __force *)(par->info->screen_base + index);
+ u16 *buf = (u16 *)(par->info->screen_buffer + index);
u16 *img = (u16 *)(par->metromem_img + index);
/* swizzle from vm to metromem and recalc cksum at the same time*/
@@ -543,7 +543,7 @@ static ssize_t metronomefb_write(struct fb_info *info, const char __user *buf,
count = total_size - p;
}
- dst = (void __force *)(info->screen_base + p);
+ dst = info->screen_buffer + p;
if (copy_from_user(dst, buf, count))
err = -EFAULT;
@@ -599,7 +599,7 @@ static int metronomefb_probe(struct platform_device *dev)
goto err;
/* we have two blocks of memory.
- info->screen_base which is vm, and is the fb used by apps.
+ info->screen_buffer which is vm, and is the fb used by apps.
par->metromem which is physically contiguous memory and
contains the display controller commands, waveform,
processed image data and padding. this is the data pulled
@@ -634,7 +634,7 @@ static int metronomefb_probe(struct platform_device *dev)
if (!videomemory)
goto err_fb_rel;
- info->screen_base = (char __force __iomem *)videomemory;
+ info->screen_buffer = videomemory;
info->fbops = &metronomefb_ops;
metronomefb_fix.line_length = fw;
@@ -756,7 +756,7 @@ static int metronomefb_remove(struct platform_device *dev)
fb_dealloc_cmap(&info->cmap);
par->board->cleanup(par);
vfree(par->csum_table);
- vfree((void __force *)info->screen_base);
+ vfree(info->screen_buffer);
module_put(par->board->owner);
dev_dbg(&dev->dev, "calling release\n");
framebuffer_release(info);
--
2.40.0
More information about the dri-devel
mailing list