[PATCH 2/2] ARM: dts: imx: add support for the ATM0700D4 panel attached to sk-imx53
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Sat Aug 26 21:54:29 UTC 2023
The SK-ATM0700D4-Plug is an extension board (provided by the same
manufacturer, [1]) which can be connected to the SK-IMX53 panel kit. The
panel can be connected either using the RGB parallel bus or using the
LVDS connector (recommended). Add DT files describing this "shield",
both RGB and LVDS connections.
[1] http://starterkit.ru/html/index.php?name=shop&op=view&id=64
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
arch/arm/boot/dts/nxp/imx/Makefile | 2 +
.../nxp/imx/imx53-sk-imx53-atm0700d4-lvds.dts | 97 +++++++++++++++
.../nxp/imx/imx53-sk-imx53-atm0700d4-rgb.dts | 112 ++++++++++++++++++
.../dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi | 45 +++++++
4 files changed, 256 insertions(+)
create mode 100644 arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-lvds.dts
create mode 100644 arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-rgb.dts
create mode 100644 arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi
diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
index 3629e343d322..7532ed6468a0 100644
--- a/arch/arm/boot/dts/nxp/imx/Makefile
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -47,6 +47,8 @@ dtb-$(CONFIG_SOC_IMX53) += \
imx53-qsb.dtb \
imx53-qsrb.dtb \
imx53-sk-imx53.dtb \
+ imx53-sk-imx53-atm0700d4-lvds.dtb \
+ imx53-sk-imx53-atm0700d4-rgb.dtb \
imx53-smd.dtb \
imx53-tx53-x03x.dtb \
imx53-tx53-x13x.dtb \
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-lvds.dts b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-lvds.dts
new file mode 100644
index 000000000000..b1c1e7c759b3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-lvds.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2023 Linaro Ltd.
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include "imx53-sk-imx53-atm0700d4.dtsi"
+
+/ {
+ lvds-decoder {
+ compatible = "ti,sn65lvds94", "lvds-decoder";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+
+ lvds_decoder_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ lvds_decoder_out: endpoint {
+ remote-endpoint = <&panel_rgb_in>;
+ };
+ };
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl_lvds0: lvds0grp {
+ /* LVDS pins only have pin mux configuration */
+ fsl,pins = <
+ MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
+ MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
+ MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
+ MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
+ MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
+ >;
+ };
+
+ pinctrl_spi_gpio: spigrp {
+ fsl,pins = <
+ MX53_PAD_EIM_A22__GPIO2_16 0x1f4
+ MX53_PAD_EIM_A21__GPIO2_17 0x1f4
+ MX53_PAD_EIM_A16__GPIO2_22 0x1f4
+ MX53_PAD_EIM_A18__GPIO2_20 0x1f4
+ >;
+ };
+};
+
+&ldb {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lvds0>;
+ status = "okay";
+
+ lvds0: lvds-channel at 0 {
+ reg = <0>;
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ port at 2 {
+ reg = <2>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&lvds_decoder_in>;
+ };
+ };
+ };
+};
+
+&panel_rgb_in {
+ remote-endpoint = <&lvds_decoder_out>;
+};
+
+&spi_ts {
+ pinctrl-0 = <&pinctrl_spi_gpio>;
+ pinctrl-names = "default";
+
+ sck-gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+};
+
+&touchscreen {
+ interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_BOTH>;
+ pendown-gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-rgb.dts b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-rgb.dts
new file mode 100644
index 000000000000..2559ada7e401
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-rgb.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2023 Linaro Ltd.
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include "imx53-sk-imx53-atm0700d4.dtsi"
+
+/ {
+ display: disp0 {
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "rgb24";
+ pinctrl-0 = <&pinctrl_rgb24>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+
+ display0_in: endpoint {
+ remote-endpoint = <&ipu_di0_disp0>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ display_out: endpoint {
+ remote-endpoint = <&panel_rgb_in>;
+ };
+ };
+ };
+
+};
+
+&iomuxc {
+ pinctrl_rgb24: rgb24grp {
+ fsl,pins = <
+ MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5
+ MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5
+ MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5
+ MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5
+ MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5
+ MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5
+ MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5
+ MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5
+ MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5
+ MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5
+ MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5
+ MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5
+ MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5
+ MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5
+ MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5
+ MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5
+ MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5
+ MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5
+ MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5
+ MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5
+ MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5
+ MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5
+ MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5
+ MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5
+ MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5
+ MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5
+ MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5
+ MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5
+ >;
+ };
+
+ pinctrl_spi_gpio: spigrp {
+ fsl,pins = <
+ MX53_PAD_SD1_DATA1__GPIO1_17 0x1f4
+ MX53_PAD_GPIO_7__GPIO1_7 0x1f4
+ MX53_PAD_PATA_DATA3__GPIO2_3 0x1f4
+ MX53_PAD_PATA_DATA8__GPIO2_8 0x1f4
+ >;
+ };
+};
+
+&ipu_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
+
+&panel {
+ enable-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+};
+
+&panel_rgb_in {
+ remote-endpoint = <&display_out>;
+};
+
+&pwm1 {
+ status = "disabled";
+};
+
+&spi_ts {
+ pinctrl-0 = <&pinctrl_spi_gpio>;
+ pinctrl-names = "default";
+
+ sck-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+};
+
+&touchscreen {
+ interrupts-extended = <&gpio2 6 IRQ_TYPE_EDGE_BOTH>;
+ pendown-gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi
new file mode 100644
index 000000000000..e395004e80e6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2023 Linaro Ltd.
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include "imx53-sk-imx53.dts"
+
+/ {
+ panel: panel-rgb {
+ compatible = "powertip,ph800480t013-idf02";
+
+ port {
+ panel_rgb_in: endpoint {
+ };
+ };
+ };
+
+ spi_ts: spi {
+ compatible = "spi-gpio";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ num-chipselects = <1>;
+
+ touchscreen: touchscreen at 0 {
+ reg = <0>;
+ compatible = "ti,ads7843";
+ spi-max-frequency = <300000>;
+
+ ti,vref-mv = /bits/ 16 <3300>;
+ ti,x-plate-ohms = /bits/ 16 <450>;
+ ti,y-plate-ohms = /bits/ 16 <250>;
+ ti,debounce-tol = /bits/ 16 <10>;
+ ti,debounce-rep = /bits/ 16 <0>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
+ touchscreen-swapped-x-y;
+ touchscreen-max-pressure = <100>;
+
+ wakeup-source;
+ };
+ };
+};
--
2.39.2
More information about the dri-devel
mailing list