[PATCH 2/2] ARM: dts: imx: add support for the ATM0700D4 panel attached to sk-imx53
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Mon Aug 28 16:02:17 UTC 2023
Hi Dmitry,
Thank you for the patch.
On Sun, Aug 27, 2023 at 12:54:29AM +0300, Dmitry Baryshkov wrote:
> The SK-ATM0700D4-Plug is an extension board (provided by the same
> manufacturer, [1]) which can be connected to the SK-IMX53 panel kit. The
> panel can be connected either using the RGB parallel bus or using the
> LVDS connector (recommended). Add DT files describing this "shield",
> both RGB and LVDS connections.
Shouldn't these be implemented as overlays ?
> [1] http://starterkit.ru/html/index.php?name=shop&op=view&id=64
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
> arch/arm/boot/dts/nxp/imx/Makefile | 2 +
> .../nxp/imx/imx53-sk-imx53-atm0700d4-lvds.dts | 97 +++++++++++++++
> .../nxp/imx/imx53-sk-imx53-atm0700d4-rgb.dts | 112 ++++++++++++++++++
> .../dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi | 45 +++++++
> 4 files changed, 256 insertions(+)
> create mode 100644 arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-lvds.dts
> create mode 100644 arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-rgb.dts
> create mode 100644 arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi
>
> diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
> index 3629e343d322..7532ed6468a0 100644
> --- a/arch/arm/boot/dts/nxp/imx/Makefile
> +++ b/arch/arm/boot/dts/nxp/imx/Makefile
> @@ -47,6 +47,8 @@ dtb-$(CONFIG_SOC_IMX53) += \
> imx53-qsb.dtb \
> imx53-qsrb.dtb \
> imx53-sk-imx53.dtb \
> + imx53-sk-imx53-atm0700d4-lvds.dtb \
> + imx53-sk-imx53-atm0700d4-rgb.dtb \
> imx53-smd.dtb \
> imx53-tx53-x03x.dtb \
> imx53-tx53-x13x.dtb \
> diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-lvds.dts b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-lvds.dts
> new file mode 100644
> index 000000000000..b1c1e7c759b3
> --- /dev/null
> +++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-lvds.dts
> @@ -0,0 +1,97 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +//
> +// Copyright 2023 Linaro Ltd.
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/pwm/pwm.h>
> +#include "imx53-sk-imx53-atm0700d4.dtsi"
> +
> +/ {
> + lvds-decoder {
> + compatible = "ti,sn65lvds94", "lvds-decoder";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> +
> + lvds_decoder_in: endpoint {
> + remote-endpoint = <&lvds0_out>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> +
> + lvds_decoder_out: endpoint {
> + remote-endpoint = <&panel_rgb_in>;
> + };
> + };
> + };
> + };
> +};
> +
> +&iomuxc {
> + pinctrl_lvds0: lvds0grp {
> + /* LVDS pins only have pin mux configuration */
> + fsl,pins = <
> + MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
> + MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
> + MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
> + MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
> + MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
> + >;
> + };
> +
> + pinctrl_spi_gpio: spigrp {
> + fsl,pins = <
> + MX53_PAD_EIM_A22__GPIO2_16 0x1f4
> + MX53_PAD_EIM_A21__GPIO2_17 0x1f4
> + MX53_PAD_EIM_A16__GPIO2_22 0x1f4
> + MX53_PAD_EIM_A18__GPIO2_20 0x1f4
> + >;
> + };
> +};
> +
> +&ldb {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lvds0>;
> + status = "okay";
> +
> + lvds0: lvds-channel at 0 {
> + reg = <0>;
> + fsl,data-mapping = "spwg";
> + fsl,data-width = <24>;
> + status = "okay";
> +
> + port at 2 {
> + reg = <2>;
> +
> + lvds0_out: endpoint {
> + remote-endpoint = <&lvds_decoder_in>;
> + };
> + };
> + };
> +};
> +
> +&panel_rgb_in {
> + remote-endpoint = <&lvds_decoder_out>;
> +};
> +
> +&spi_ts {
> + pinctrl-0 = <&pinctrl_spi_gpio>;
> + pinctrl-names = "default";
> +
> + sck-gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
> + miso-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
> + mosi-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
> + cs-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&touchscreen {
> + interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_BOTH>;
> + pendown-gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
> +};
> diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-rgb.dts b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-rgb.dts
> new file mode 100644
> index 000000000000..2559ada7e401
> --- /dev/null
> +++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-rgb.dts
> @@ -0,0 +1,112 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +//
> +// Copyright 2023 Linaro Ltd.
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/pwm/pwm.h>
> +#include "imx53-sk-imx53-atm0700d4.dtsi"
> +
> +/ {
> + display: disp0 {
> + compatible = "fsl,imx-parallel-display";
> + interface-pix-fmt = "rgb24";
> + pinctrl-0 = <&pinctrl_rgb24>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> +
> + display0_in: endpoint {
> + remote-endpoint = <&ipu_di0_disp0>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> +
> + display_out: endpoint {
> + remote-endpoint = <&panel_rgb_in>;
> + };
> + };
> + };
> +
> +};
> +
> +&iomuxc {
> + pinctrl_rgb24: rgb24grp {
> + fsl,pins = <
> + MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5
> + MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5
> + MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5
> + MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5
> + MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5
> + MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5
> + MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5
> + MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5
> + MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5
> + MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5
> + MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5
> + MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5
> + MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5
> + MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5
> + MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5
> + MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5
> + MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5
> + MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5
> + MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5
> + MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5
> + MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5
> + MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5
> + MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5
> + MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5
> + MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5
> + MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5
> + MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5
> + MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5
> + >;
> + };
> +
> + pinctrl_spi_gpio: spigrp {
> + fsl,pins = <
> + MX53_PAD_SD1_DATA1__GPIO1_17 0x1f4
> + MX53_PAD_GPIO_7__GPIO1_7 0x1f4
> + MX53_PAD_PATA_DATA3__GPIO2_3 0x1f4
> + MX53_PAD_PATA_DATA8__GPIO2_8 0x1f4
> + >;
> + };
> +};
> +
> +&ipu_di0_disp0 {
> + remote-endpoint = <&display0_in>;
> +};
> +
> +&panel {
> + enable-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&panel_rgb_in {
> + remote-endpoint = <&display_out>;
> +};
> +
> +&pwm1 {
> + status = "disabled";
> +};
> +
> +&spi_ts {
> + pinctrl-0 = <&pinctrl_spi_gpio>;
> + pinctrl-names = "default";
> +
> + sck-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
> + mosi-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
> + miso-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
> + cs-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&touchscreen {
> + interrupts-extended = <&gpio2 6 IRQ_TYPE_EDGE_BOTH>;
> + pendown-gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
> +};
> diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi
> new file mode 100644
> index 000000000000..e395004e80e6
> --- /dev/null
> +++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi
> @@ -0,0 +1,45 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +//
> +// Copyright 2023 Linaro Ltd.
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/pwm/pwm.h>
> +#include "imx53-sk-imx53.dts"
> +
> +/ {
> + panel: panel-rgb {
> + compatible = "powertip,ph800480t013-idf02";
> +
> + port {
> + panel_rgb_in: endpoint {
> + };
> + };
> + };
> +
> + spi_ts: spi {
> + compatible = "spi-gpio";
> + #address-cells = <0x1>;
> + #size-cells = <0x0>;
> +
> + num-chipselects = <1>;
> +
> + touchscreen: touchscreen at 0 {
> + reg = <0>;
> + compatible = "ti,ads7843";
> + spi-max-frequency = <300000>;
> +
> + ti,vref-mv = /bits/ 16 <3300>;
> + ti,x-plate-ohms = /bits/ 16 <450>;
> + ti,y-plate-ohms = /bits/ 16 <250>;
> + ti,debounce-tol = /bits/ 16 <10>;
> + ti,debounce-rep = /bits/ 16 <0>;
> + touchscreen-size-x = <4096>;
> + touchscreen-size-y = <4096>;
> + touchscreen-swapped-x-y;
> + touchscreen-max-pressure = <100>;
> +
> + wakeup-source;
> + };
> + };
> +};
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list