[PATCH v3 6/6] ARM: dts: stm32: Use new media bus type macros

[Alexandre TORGUE]

Hi Laurent

On 1/14/23 16:36, Laurent Pinchart wrote:
> Hugues, Maxime, Alexandre, could one of you take this patch in your tree
> for v6.3 ? The two patches that it depends on have both been merged in
> v6.2.

Yes sure.

Cheers
Alex

> 
> On Thu, Jun 16, 2022 at 01:14:10AM +0300, Laurent Pinchart wrote:
>> Now that a header exists with macros for the media interface bus-type
>> values, replace hardcoding numerical constants with the corresponding
>> macros in the DT sources.
>>
>> Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
>> ---
>>   arch/arm/boot/dts/stm32429i-eval.dts  | 3 ++-
>>   arch/arm/boot/dts/stm32mp157c-ev1.dts | 3 ++-
>>   2 files changed, 4 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
>> index 0d98aca01736..5fae11e6607b 100644
>> --- a/arch/arm/boot/dts/stm32429i-eval.dts
>> +++ b/arch/arm/boot/dts/stm32429i-eval.dts
>> @@ -50,6 +50,7 @@
>>   #include "stm32f429-pinctrl.dtsi"
>>   #include <dt-bindings/input/input.h>
>>   #include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/media/video-interfaces.h>
>>   
>>   / {
>>   	model = "STMicroelectronics STM32429i-EVAL board";
>> @@ -186,7 +187,7 @@ &dcmi {
>>   	port {
>>   		dcmi_0: endpoint {
>>   			remote-endpoint = <&ov2640_0>;
>> -			bus-type = <5>;
>> +			bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
>>   			bus-width = <8>;
>>   			hsync-active = <0>;
>>   			vsync-active = <0>;
>> diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
>> index d142dd30e16b..306d41a6138f 100644
>> --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
>> +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
>> @@ -8,6 +8,7 @@
>>   #include "stm32mp157c-ed1.dts"
>>   #include <dt-bindings/gpio/gpio.h>
>>   #include <dt-bindings/input/input.h>
>> +#include <dt-bindings/media/video-interfaces.h>
>>   
>>   / {
>>   	model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
>> @@ -90,7 +91,7 @@ &dcmi {
>>   	port {
>>   		dcmi_0: endpoint {
>>   			remote-endpoint = <&ov5640_0>;
>> -			bus-type = <5>;
>> +			bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
>>   			bus-width = <8>;
>>   			hsync-active = <0>;
>>   			vsync-active = <0>;
>