[PATCH] dt-bindings: qcom: Update RPMHPD entries for some SoCs

[Pavan Kondeti]

On Thu, Jul 27, 2023 at 12:24:10PM +0530, Rohit Agarwal wrote:
> 
> On 7/27/2023 11:06 AM, Pavan Kondeti wrote:
> > On Thu, Jul 27, 2023 at 10:21:10AM +0530, Rohit Agarwal wrote:
> > > Update the RPMHPD references with new bindings defined in rpmhpd.h
> > > for Qualcomm SoCs SM8[2345]50.
> > > 
> > > Signed-off-by: Rohit Agarwal <quic_rohiagar at quicinc.com>
> > > ---
> > >   Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml    | 3 ++-
> > >   Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml   | 3 ++-
> > >   Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml     | 3 ++-
> > >   Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml    | 3 ++-
> > >   Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml   | 3 ++-
> > >   Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml    | 3 ++-
> > >   Documentation/devicetree/bindings/clock/qcom,videocc.yaml          | 3 ++-
> > >   Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml | 3 ++-
> > >   .../devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml          | 7 ++++---
> > >   Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml | 3 ++-
> > >   .../devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml          | 5 +++--
> > >   Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml | 3 ++-
> > >   .../devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml          | 7 ++++---
> > >   Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml | 3 ++-
> > >   .../devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml          | 7 ++++---
> > >   Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml     | 3 ++-
> > >   Documentation/devicetree/bindings/mmc/sdhci-msm.yaml               | 3 ++-
> > >   Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml  | 5 +++--
> > >   18 files changed, 44 insertions(+), 26 deletions(-)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> > > index d6774db..d6b81c0 100644
> > > --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> > > +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> > > @@ -83,6 +83,7 @@ examples:
> > >     - |
> > >       #include <dt-bindings/clock/qcom,rpmh.h>
> > >       #include <dt-bindings/power/qcom-rpmpd.h>
> > > +    #include <dt-bindings/power/qcom,rpmhpd.h>
> > >       clock-controller at af00000 {
> > >         compatible = "qcom,sm8250-dispcc";
> > >         reg = <0x0af00000 0x10000>;
> > > @@ -103,7 +104,7 @@ examples:
> > >         #clock-cells = <1>;
> > >         #reset-cells = <1>;
> > >         #power-domain-cells = <1>;
> > > -      power-domains = <&rpmhpd SM8250_MMCX>;
> > > +      power-domains = <&rpmhpd RPMHPD_MMCX>;
> > >         required-opps = <&rpmhpd_opp_low_svs>;
> > >       };
> > >   ...
> > Does this file still need to include old header? The same is applicable
> > to some of the other files in the patch also.
> > 
> > We also discussed on the other thread [1] to move the regulator level
> > definitions to new header. should this change be done after that, so that
> > we don't end up touching the very same files again?
> > 
> > [1]
> > https://lore.kernel.org/all/a4zztrn6jhblozdswba7psqtvjt5l765mfr3yl4llsm5gsyqef@7x6q7yabydvm/
> Removing this header directly would also be fine as we are not using any
> macro defined directly in these
> bindings.
> I already checked with dt_binding_check by removing this header.
> 
Thanks for checking, then we should remove the old header in this patch
it self, right?

Thanks,
Pavan