[PATCH 21/21] panel: startek-kd070fhfid015: add support of this display
Neil Armstrong
neil.armstrong at linaro.org
Thu Mar 9 14:51:08 UTC 2023
Hi,
On 09/03/2023 15:23, Alexandre Mergnat wrote:
> From: Guillaume La Roque <glaroque at baylibre.com>
>
> This driver support the Startek KD070FHFID015, which is a 7-inch TFT LCD
> display using MIPI DSI interface.
>
> Signed-off-by: Guillaume La Roque <glaroque at baylibre.com>
> Signed-off-by: Alexandre Mergnat <amergnat at baylibre.com>
> ---
> drivers/gpu/drm/panel/Kconfig | 12 +
> drivers/gpu/drm/panel/Makefile | 1 +
> .../gpu/drm/panel/panel-startek-kd070fhfid015.c | 483 +++++++++++++++++++++
> 3 files changed, 496 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 737edcdf9eef..3fccf025013b 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -666,6 +666,17 @@ config DRM_PANEL_SONY_TULIP_TRULY_NT35521
> NT35521 1280x720 video mode panel as found on Sony Xperia M4
> Aqua phone.
>
> +config DRM_PANEL_STARTEK_KD070FHFID015
> + tristate "STARTEK KD070FHFID015 panel"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
> + based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display
> + with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
> + the host, a built-in LED backlight and touch controller.
> +
> config DRM_PANEL_TDO_TL070WSH30
> tristate "TDO TL070WSH30 DSI panel"
> depends on OF
> @@ -736,4 +747,5 @@ config DRM_PANEL_XINPENG_XPP055C272
> Say Y here if you want to enable support for the Xinpeng
> XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
> system interfaces.
> +
Spurious new line
> endmenu
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index f8f9d9f6a307..35771fc51187 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -67,6 +67,7 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
> obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
> obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
> obj-$(CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521) += panel-sony-tulip-truly-nt35521.o
> +obj-$(CONFIG_DRM_PANEL_STARTEK_KD070FHFID015) += panel-startek-kd070fhfid015.o
> obj-$(CONFIG_DRM_PANEL_TDO_TL070WSH30) += panel-tdo-tl070wsh30.o
> obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
> obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
> diff --git a/drivers/gpu/drm/panel/panel-startek-kd070fhfid015.c b/drivers/gpu/drm/panel/panel-startek-kd070fhfid015.c
> new file mode 100644
> index 000000000000..88466bf6428d
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-startek-kd070fhfid015.c
> @@ -0,0 +1,483 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2016 InforceComputing
> + * Copyright (C) 2016 Linaro Ltd
> + * Copyright (C) 2023 BayLibre, SAS
> + *
> + * Author:
NIT: Authors
> + * - Vinay Simha BN <simhavcs at gmail.com>
> + * - Sumit Semwal <sumit.semwal at linaro.org>
> + * - Guillaume La Roque <glaroque at baylibre.com>
> + *
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_crtc.h>
Is this include needed ?
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +#define DSI_REG_MCAP 0xB0
> +#define DSI_REG_IS 0xB3 /* Interface Setting */
> +#define DSI_REG_IIS 0xB4 /* Interface ID Setting */
> +#define DSI_REG_CTRL 0xB6
> +
> +struct stk_panel {
> + struct drm_panel base;
> + struct mipi_dsi_device *dsi;
> +
> + struct gpio_desc *enable_gpio;
> + struct gpio_desc *reset_gpio;
> + struct gpio_desc *dcdc_en_gpio;
Isn't this "DCDC" a regulator ???
> + struct backlight_device *backlight;
> + struct regulator *iovcc_supply;
> + struct regulator *power_supply;
> +
> + bool prepared;
> + bool enabled;
> +
> + const struct drm_display_mode *mode;
> +};
> +
> +static inline struct stk_panel *to_stk_panel(struct drm_panel *panel)
> +{
> + return container_of(panel, struct stk_panel, base);
> +}
> +
> +static int stk_panel_init(struct stk_panel *stk)
> +{
> + struct mipi_dsi_device *dsi = stk->dsi;
> + struct device *dev = &stk->dsi->dev;
> + int ret;
> +
> + ret = mipi_dsi_dcs_soft_reset(dsi);
> + if (ret < 0) {
> + dev_err(dev, "failed to mipi_dsi_dcs_soft_reset: %d\n", ret);
> + return ret;
> + }
> + mdelay(5);
> +
> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> + if (ret < 0) {
> + dev_err(dev, "failed to set exit sleep mode: %d\n", ret);
> + return ret;
> + }
> + msleep(120);
> +
> + ret = mipi_dsi_generic_write(dsi, (u8[]){DSI_REG_MCAP, 0x04}, 2);
> + if (ret < 0) {
> + dev_err(dev, "failed to set mcap: %d\n", ret);
> + return ret;
> + }
> + /* Interface setting, video mode */
> + ret = mipi_dsi_generic_write(dsi,
> + (u8[]){DSI_REG_IS, 0x14, 0x08, 0x00, 0x22, 0x00}, 6);
> + if (ret < 0) {
> + dev_err(dev, "failed to set display interface setting: %d\n",
> + ret);
> + return ret;
> + }
Use mipi_dsi_generic_write_seq(dsi, DSI_REG_IS, 0x14, 0x08, 0x00, 0x22, 0x00); instead,
it's simpler and doesn't need explicit return check.
> +
> + ret = mipi_dsi_generic_write(dsi, (u8[]){DSI_REG_IIS, 0x0C, 0x00}, 3);
> + if (ret < 0) {
> + dev_err(dev, "failed to set Interface ID setting: %d\n", ret);
> + return ret;
> + }
> +
> + ret = mipi_dsi_generic_write(dsi, (u8[]){ DSI_REG_CTRL, 0x3A, 0xD3}, 3);
> + if (ret < 0) {
> + dev_err(dev, "failed to set DSI control: %d\n", ret);
> + return ret;
> + }
> +
> + ret = mipi_dsi_dcs_set_display_brightness(dsi, 0x77);
> + if (ret < 0) {
> + dev_err(dev, "failed to write display brightness: %d\n", ret);
> + return ret;
> + }
> +
> + ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY,
> + (u8[]){ MIPI_DCS_WRITE_MEMORY_START }, 1);
> + if (ret < 0) {
> + dev_err(dev, "failed to write control display: %d\n", ret);
> + return ret;
> + }
> +
> + ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x77);
> + if (ret < 0) {
> + dev_err(dev, "failed to set pixel format: %d\n", ret);
> + return ret;
> + }
> +
> + ret = mipi_dsi_dcs_set_column_address(dsi, 0, stk->mode->hdisplay - 1);
> + if (ret < 0) {
> + dev_err(dev, "failed to set column address: %d\n", ret);
> + return ret;
> + }
> +
> + ret = mipi_dsi_dcs_set_page_address(dsi, 0, stk->mode->vdisplay - 1);
> + if (ret < 0) {
> + dev_err(dev, "failed to set page address: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int stk_panel_on(struct stk_panel *stk)
> +{
> + struct mipi_dsi_device *dsi = stk->dsi;
> + struct device *dev = &stk->dsi->dev;
> + int ret;
> +
> + ret = mipi_dsi_dcs_set_display_on(dsi);
> + if (ret < 0)
> + dev_err(dev, "failed to set display on: %d\n", ret);
> +
> + mdelay(20);
> +
> + return ret;
> +}
> +
> +static void stk_panel_off(struct stk_panel *stk)
> +{
> + struct mipi_dsi_device *dsi = stk->dsi;
> + struct device *dev = &stk->dsi->dev;
> + int ret;
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_dcs_set_display_off(dsi);
> + if (ret < 0)
> + dev_err(dev, "failed to set display off: %d\n", ret);
> +
> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> + if (ret < 0)
> + dev_err(dev, "failed to enter sleep mode: %d\n", ret);
> +
> + msleep(100);
> +}
> +
> +static int stk_panel_disable(struct drm_panel *panel)
> +{
> + struct stk_panel *stk = to_stk_panel(panel);
> +
> + if (!stk->enabled)
> + return 0;
> +
> + backlight_disable(stk->backlight);
> +
> + stk->enabled = false;
> +
> + return 0;
> +}
> +
> +static int stk_panel_unprepare(struct drm_panel *panel)
> +{
> + struct stk_panel *stk = to_stk_panel(panel);
> +
> + if (!stk->prepared)
> + return 0;
> +
> + stk_panel_off(stk);
> + regulator_disable(stk->iovcc_supply);
> + regulator_disable(stk->power_supply);
> + gpiod_set_value(stk->reset_gpio, 0);
> + gpiod_set_value(stk->dcdc_en_gpio, 1);
> +
> + stk->prepared = false;
> +
> + return 0;
> +}
> +
> +static int stk_panel_prepare(struct drm_panel *panel)
> +{
> + struct stk_panel *stk = to_stk_panel(panel);
> + struct device *dev = &stk->dsi->dev;
> + int ret;
> +
> + if (stk->prepared)
> + return 0;
> +
> + gpiod_set_value(stk->reset_gpio, 0);
> + gpiod_set_value(stk->dcdc_en_gpio, 0);
> + gpiod_set_value(stk->enable_gpio, 0);
> + ret = regulator_enable(stk->iovcc_supply);
> + if (ret < 0)
> + return ret;
> + mdelay(8);
> + ret = regulator_enable(stk->power_supply);
> + if (ret < 0)
> + goto iovccoff;
Add blank lines between code blocks for readability
> + mdelay(20);
> + gpiod_set_value(stk->dcdc_en_gpio, 1);
> + mdelay(20);
> + gpiod_set_value(stk->reset_gpio, 1);
> + mdelay(10);
> +
> + ret = stk_panel_init(stk);
> + if (ret < 0) {
> + dev_err(dev, "failed to init panel: %d\n", ret);
> + goto poweroff;
> + }
> +
> + ret = stk_panel_on(stk);
> + if (ret < 0) {
> + dev_err(dev, "failed to set panel on: %d\n", ret);
> + goto poweroff;
> + }
> +
> + stk->prepared = true;
> +
> + return 0;
> +
> +poweroff:
> + regulator_disable(stk->power_supply);
> +iovccoff:
> + regulator_disable(stk->iovcc_supply);
> + gpiod_set_value(stk->enable_gpio, 0);
> + gpiod_set_value(stk->reset_gpio, 0);
> + gpiod_set_value(stk->dcdc_en_gpio, 0);
> +
> + return ret;
> +}
> +
> +static int stk_panel_enable(struct drm_panel *panel)
> +{
> + struct stk_panel *stk = to_stk_panel(panel);
> +
> + if (stk->enabled)
> + return 0;
> +
> + backlight_enable(stk->backlight);
> +
> + stk->enabled = true;
> +
> + return 0;
> +}
Is this really needed ? the backlight core will enable it automatically.
> +
> +static const struct drm_display_mode default_mode = {
> + .clock = 163204,
> + .hdisplay = 1200,
> + .hsync_start = 1200 + 144,
> + .hsync_end = 1200 + 144 + 16,
> + .htotal = 1200 + 144 + 16 + 45, // 1405
No need for the comment
> + .vdisplay = 1920,
> + .vsync_start = 1920 + 8,
> + .vsync_end = 1920 + 8 + 4,
> + .vtotal = 1920 + 8 + 4 + 4, // 1936
You can also set .width_mm & .height_mm and copy them to connector->display_info later.
> +};
> +
> +static int stk_panel_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(connector->dev, &default_mode);
> + if (!mode) {
> + dev_err(panel->dev, "failed to add mode %ux%ux@%u\n",
> + default_mode.hdisplay, default_mode.vdisplay,
> + drm_mode_vrefresh(&default_mode));
> + return -ENOMEM;
> + }
> +
> + drm_mode_set_name(mode);
> +
> + drm_mode_probed_add(connector, mode);
> +
> + connector->display_info.width_mm = 95;
> + connector->display_info.height_mm = 151;
> +
> + return 1;
> +}
> +
> +static int dsi_dcs_bl_get_brightness(struct backlight_device *bl)
> +{
> + struct mipi_dsi_device *dsi = bl_get_data(bl);
> + int ret;
> + u16 brightness = bl->props.brightness;
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_dcs_get_display_brightness(dsi, &brightness);
> + if (ret < 0)
> + return ret;
> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> + return brightness & 0xff;
> +}
> +
> +static int dsi_dcs_bl_update_status(struct backlight_device *bl)
> +{
> + struct mipi_dsi_device *dsi = bl_get_data(bl);
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_dcs_set_display_brightness(dsi, bl->props.brightness);
> + if (ret < 0) {
> + dev_err(dev, "failed to set DSI control: %d\n", ret);
> + return ret;
> + }
> +
> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> + return 0;
> +}
> +
> +static const struct backlight_ops dsi_bl_ops = {
> + .update_status = dsi_dcs_bl_update_status,
> + .get_brightness = dsi_dcs_bl_get_brightness,
> +};
> +
> +static struct backlight_device *
> +drm_panel_create_dsi_backlight(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct backlight_properties props;
> +
> + memset(&props, 0, sizeof(props));
> + props.type = BACKLIGHT_RAW;
> + props.brightness = 255;
> + props.max_brightness = 255;
You could write :
struct backlight_properties props = {
.type = BACKLIGHT_RAW,
.brightness = 255,
.max_brightness = 255,
};
> +
> + return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
> + &dsi_bl_ops, &props);
> +}
> +
> +static const struct drm_panel_funcs stk_panel_funcs = {
> + .disable = stk_panel_disable,
> + .unprepare = stk_panel_unprepare,
> + .prepare = stk_panel_prepare,
> + .enable = stk_panel_enable,
> + .get_modes = stk_panel_get_modes,
> +};
> +
> +static const struct of_device_id stk_of_match[] = {
> + { .compatible = "startek,kd070fhfid015", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, stk_of_match);
> +
> +static int stk_panel_add(struct stk_panel *stk)
> +{
> + struct device *dev = &stk->dsi->dev;
> + int ret;
> +
> + stk->mode = &default_mode;
> +
> + stk->iovcc_supply = devm_regulator_get(dev, "iovcc");
> + if (IS_ERR(stk->iovcc_supply))
> + return PTR_ERR(stk->iovcc_supply);
> +
> + stk->power_supply = devm_regulator_get(dev, "power");
> + if (IS_ERR(stk->power_supply))
> + return PTR_ERR(stk->power_supply);
You can switch to devm_regulator_bulk_get() to simplify code.
> +
> + stk->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(stk->reset_gpio)) {
> + ret = PTR_ERR(stk->reset_gpio);
> + dev_err(dev, "cannot get reset-gpios %d\n", ret);
> + return ret;
> + }
> +
> + stk->dcdc_en_gpio = devm_gpiod_get(dev, "dcdc", GPIOD_OUT_LOW);
> + if (IS_ERR(stk->dcdc_en_gpio)) {
> + ret = PTR_ERR(stk->dcdc_en_gpio);
> + dev_err(dev, "cannot get dcdc-en-gpio %d\n", ret);
> + return ret;
> + }
> +
> + stk->backlight = drm_panel_create_dsi_backlight(stk->dsi);
> + if (IS_ERR(stk->backlight)) {
> + ret = PTR_ERR(stk->backlight);
> + dev_err(dev, "failed to register backlight %d\n", ret);
> + return ret;
> + }
> +
> + drm_panel_init(&stk->base, &stk->dsi->dev, &stk_panel_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> +
> + drm_panel_add(&stk->base);
> +
> + return 0;
> +}
> +
> +static void stk_panel_del(struct stk_panel *stk)
> +{
> + if (stk->base.dev)
> + drm_panel_remove(&stk->base);
Is the if() necessary ? Not sure, you can remove it and directly call drm_panel_remove(&stk->base);
> +}
> +
> +static int stk_panel_probe(struct mipi_dsi_device *dsi)
> +{
> + struct stk_panel *stk;
> + int ret;
> +
> + dsi->lanes = 4;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = (MIPI_DSI_MODE_VIDEO |
> + MIPI_DSI_MODE_LPM);
This could be on a single line
> +
> + stk = devm_kzalloc(&dsi->dev, sizeof(*stk), GFP_KERNEL);
> + if (!stk)
> + return -ENOMEM;
> +
> + mipi_dsi_set_drvdata(dsi, stk);
> +
> + stk->dsi = dsi;
> +
> + ret = stk_panel_add(stk);
> + if (ret < 0)
> + return ret;
> +
> + return mipi_dsi_attach(dsi);
You should call drm_panel_remove() if attach fails
> +}
> +
> +static void stk_panel_remove(struct mipi_dsi_device *dsi)
> +{
> + struct stk_panel *stk = mipi_dsi_get_drvdata(dsi);
> + int err;
> +
> + err = stk_panel_disable(&stk->base);
> + if (err < 0)
> + dev_err(&dsi->dev, "failed to disable panel: %d\n", err) > +
> + err = mipi_dsi_detach(dsi);
> + if (err < 0)
> + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n",
> + err);
> +
> + stk_panel_del(stk);
Move the content of stk_panel_del() here, no need for a separate function.
> +}
> +
> +static void stk_panel_shutdown(struct mipi_dsi_device *dsi)
> +{
> + struct stk_panel *stk = mipi_dsi_get_drvdata(dsi);
> +
> + stk_panel_disable(&stk->base);
> +}
> +
> +static struct mipi_dsi_driver stk_panel_driver = {
> + .driver = {
> + .name = "panel-startek-kd070fhfid015",
> + .of_match_table = stk_of_match,
> + },
> + .probe = stk_panel_probe,
> + .remove = stk_panel_remove,
> + .shutdown = stk_panel_shutdown,
> +};
> +module_mipi_dsi_driver(stk_panel_driver);
> +
> +MODULE_AUTHOR("Guillaume La Roque <glaroque at baylibre.com>");
> +MODULE_DESCRIPTION("STARTEK KD070FHFID015");
> +MODULE_LICENSE("GPL");
>
Thanks,
Neil
More information about the dri-devel
mailing list