[PATCH v8 6/8] drm/msm/dpu: separate DSC flush update out of interface
Marijn Suijten
marijn.suijten at somainline.org
Mon May 15 21:52:30 UTC 2023
On 2023-05-12 11:00:21, Kuogee Hsieh wrote:
>
> Current DSC flush update is piggyback inside dpu_hw_ctl_intf_cfg_v1().
Can you rewrite "is piggyback"? Something like "Currently DSC flushing
happens during interface configuration". And it's intf configuration
**on the CTL**, which makes this extra confusing.
> This patch separates DSC flush away from dpu_hw_ctl_intf_cfg_v1() by
Drop "This patch". Then, separates -> Separate
> adding dpu_hw_ctl_update_pending_flush_dsc_v1() to handle both per
> DSC engine and DSC flush bits at same time to make it consistent with
Make that per-DSC with a hyphen.
> the location of flush programming of other dpu sub blocks.
DPU sub-blocks.
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 14 ++++++++++++--
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 22 ++++++++++++++++------
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h | 10 ++++++++++
> 3 files changed, 38 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index ffa6f04..5cae70e 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -1834,12 +1834,18 @@ dpu_encoder_dsc_initial_line_calc(struct drm_dsc_config *dsc,
> return DIV_ROUND_UP(total_pixels, dsc->slice_width);
> }
>
> -static void dpu_encoder_dsc_pipe_cfg(struct dpu_hw_dsc *hw_dsc,
> +static void dpu_encoder_dsc_pipe_cfg(struct dpu_encoder_virt *dpu_enc,
Why not pass hw_ctl directly? The other blocks are directly passed as
well, and the caller already has cur_master. Otherwise we might as well
inline the for loops. Same question for the new _clr call added in
patch 8/8.
> + struct dpu_hw_dsc *hw_dsc,
> struct dpu_hw_pingpong *hw_pp,
> struct drm_dsc_config *dsc,
> u32 common_mode,
> u32 initial_lines)
> {
> + struct dpu_encoder_phys *cur_master = dpu_enc->cur_master;
> + struct dpu_hw_ctl *ctl;
> +
> + ctl = cur_master->hw_ctl;
Assign this directly at declaration, just like cur_master (but
irrelevant if you pass this directly instead).
> +
> if (hw_dsc->ops.dsc_config)
> hw_dsc->ops.dsc_config(hw_dsc, dsc, common_mode, initial_lines);
>
> @@ -1854,6 +1860,9 @@ static void dpu_encoder_dsc_pipe_cfg(struct dpu_hw_dsc *hw_dsc,
>
> if (hw_pp->ops.enable_dsc)
> hw_pp->ops.enable_dsc(hw_pp);
> +
> + if (ctl->ops.update_pending_flush_dsc)
> + ctl->ops.update_pending_flush_dsc(ctl, hw_dsc->idx);
> }
>
> static void dpu_encoder_prep_dsc(struct dpu_encoder_virt *dpu_enc,
> @@ -1898,7 +1907,8 @@ static void dpu_encoder_prep_dsc(struct dpu_encoder_virt *dpu_enc,
> initial_lines = dpu_encoder_dsc_initial_line_calc(dsc, enc_ip_w);
>
> for (i = 0; i < MAX_CHANNELS_PER_ENC; i++)
> - dpu_encoder_dsc_pipe_cfg(hw_dsc[i], hw_pp[i], dsc, dsc_common_mode, initial_lines);
> + dpu_encoder_dsc_pipe_cfg(dpu_enc, hw_dsc[i], hw_pp[i], dsc,
> + dsc_common_mode, initial_lines);
> }
>
> void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc)
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index 4f7cfa9..f3a50cc 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -139,6 +139,11 @@ static inline void dpu_hw_ctl_trigger_flush_v1(struct dpu_hw_ctl *ctx)
> CTL_DSPP_n_FLUSH(dspp - DSPP_0),
> ctx->pending_dspp_flush_mask[dspp - DSPP_0]);
> }
> +
> + if (ctx->pending_flush_mask & BIT(DSC_IDX))
> + DPU_REG_WRITE(&ctx->hw, CTL_DSC_FLUSH,
> + ctx->pending_dsc_flush_mask);
When are we setting this to zero again?
Same question for the other masks, only the global pending_flush_mask
and pending_dspp_flush_mask are reset in dpu_hw_ctl_clear_pending_flush.
> +
> DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, ctx->pending_flush_mask);
> }
>
> @@ -285,6 +290,13 @@ static void dpu_hw_ctl_update_pending_flush_merge_3d_v1(struct dpu_hw_ctl *ctx,
> ctx->pending_flush_mask |= BIT(MERGE_3D_IDX);
> }
>
> +static void dpu_hw_ctl_update_pending_flush_dsc_v1(struct dpu_hw_ctl *ctx,
> + enum dpu_dsc dsc_num)
> +{
> + ctx->pending_dsc_flush_mask |= BIT(dsc_num - DSC_0);
> + ctx->pending_flush_mask |= BIT(DSC_IDX);
> +}
> +
> static void dpu_hw_ctl_update_pending_flush_dspp(struct dpu_hw_ctl *ctx,
> enum dpu_dspp dspp, u32 dspp_sub_blk)
> {
> @@ -502,9 +514,6 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
> if ((test_bit(DPU_CTL_VM_CFG, &ctx->caps->features)))
> mode_sel = CTL_DEFAULT_GROUP_ID << 28;
>
> - if (cfg->dsc)
> - DPU_REG_WRITE(&ctx->hw, CTL_DSC_FLUSH, cfg->dsc);
> -
> if (cfg->intf_mode_sel == DPU_CTL_MODE_SEL_CMD)
> mode_sel |= BIT(17);
>
> @@ -524,10 +533,8 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
> if (cfg->merge_3d)
> DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE,
> BIT(cfg->merge_3d - MERGE_3D_0));
Can we have a newline here?
> - if (cfg->dsc) {
> - DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, DSC_IDX);
Found the reason why this patch (as one of the few) is needed to get
display working on my SM8150/SM8250 devices: the semantic change is that
BIT() was missing around DSC_IDX here.
(It wasn't hampering SDM845 because it doesn't have a configurable
crossbar, i.e. DPU_CTL_ACTIVE_CFG)
Manually reverting this patch and adding BIT() indeed also fixes the
issue.
This semantic change should be documented in the description and with a
Fixes: (and Reported-by:?), or as a separate preliminary patch for
clarity.
> + if (cfg->dsc)
> DPU_REG_WRITE(c, CTL_DSC_ACTIVE, cfg->dsc);
> - }
> }
>
> static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
> @@ -630,6 +637,9 @@ static void _setup_ctl_ops(struct dpu_hw_ctl_ops *ops,
> ops->update_pending_flush_merge_3d =
> dpu_hw_ctl_update_pending_flush_merge_3d_v1;
> ops->update_pending_flush_wb = dpu_hw_ctl_update_pending_flush_wb_v1;
> +
And while adding a newline above, drop the one here.
> + ops->update_pending_flush_dsc =
> + dpu_hw_ctl_update_pending_flush_dsc_v1;
> } else {
> ops->trigger_flush = dpu_hw_ctl_trigger_flush;
> ops->setup_intf_cfg = dpu_hw_ctl_intf_cfg;
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> index 6292002..d4869a0 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> @@ -158,6 +158,15 @@ struct dpu_hw_ctl_ops {
> enum dpu_dspp blk, u32 dspp_sub_blk);
>
> /**
> + * OR in the given flushbits to the cached pending_(dsc_)flush_mask
> + * No effect on hardware
> + * @ctx : ctl path ctx pointer
> + * @blk : interface block index
Can you drop the spaces before the colon (:)? That's wrong and will be
fixed elsewhere later.
> + */
> + void (*update_pending_flush_dsc)(struct dpu_hw_ctl *ctx,
> + enum dpu_dsc blk);
Indent with a single tab to match the rest.
> +
> + /**
> * Write the value of the pending_flush_mask to hardware
> * @ctx : ctl path ctx pointer
> */
> @@ -245,6 +254,7 @@ struct dpu_hw_ctl {
> u32 pending_wb_flush_mask;
> u32 pending_merge_3d_flush_mask;
> u32 pending_dspp_flush_mask[DSPP_MAX - DSPP_0];
> + u32 pending_dsc_flush_mask;
Don't forget to add this to the doc-comment, or did you skip it by
intention because pending_merge_3d_flush_mask and
pending_dspp_flush_mask are missing as well?
- Marijn
>
> /* ops */
> struct dpu_hw_ctl_ops ops;
> --
> 2.7.4
>
More information about the dri-devel
mailing list