[PATCH V2] dt-bindings: bridge: samsung-dsim: Make some flags optional

[Adam Ford]

On Sun, May 28, 2023 at 8:34 AM Jagan Teki <jagan at amarulasolutions.com> wrote:
>
> On Sun, May 28, 2023 at 6:57 PM Adam Ford <aford173 at gmail.com> wrote:
> >
> > In the event a device is connected to the samsung-dsim
> > controller that doesn't support the burst-clock, the
> > driver is able to get the requested pixel clock from the
> > attached device or bridge.  In these instances, the
> > samsung,burst-clock-frequency isn't needed, so remove
> > it from the required list.
> >
> > The pll-clock frequency can be set by the device tree entry
> > for samsung,pll-clock-frequency, but in some cases, the
> > pll-clock may have the same clock rate as sclk_mipi clock.
> > If they are equal, this flag is not needed since the driver
> > will use the sclk_mipi rate as a fallback.
> >
> > Signed-off-by: Adam Ford <aford173 at gmail.com>
> > Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
> > ---
> > V2:  Split from driver series.  Re-word updates for burst
> > and pll-clock frequency.
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
> > index 9f61ebdfefa8..06b6c44d4641 100644
> > --- a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
> > +++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
> > @@ -70,7 +70,9 @@ properties:
> >    samsung,burst-clock-frequency:
> >      $ref: /schemas/types.yaml#/definitions/uint32
> >      description:
> > -      DSIM high speed burst mode frequency.
> > +      DSIM high speed burst mode frequency.  If absent,
> > +      the pixel clock from the attached device or bridge
> > +      will be used instead.
> >
> >    samsung,esc-clock-frequency:
> >      $ref: /schemas/types.yaml#/definitions/uint32
> > @@ -80,7 +82,8 @@ properties:
> >    samsung,pll-clock-frequency:
> >      $ref: /schemas/types.yaml#/definitions/uint32
> >      description:
> > -      DSIM oscillator clock frequency.
> > +      DSIM oscillator clock frequency. If absent, the clock frequency
> > +      of sclk_mipi will be used instead.
>
> Maybe this explicit comment won't require as it is not listed in "required"

I mostly listed it here to explain why it's being removed from the
required list and what happens if it's missing.
>
> Reviewed-by: Jagan Teki <jagan at amarulasolutions.com>