[PATCH V2] dt-bindings: bridge: samsung-dsim: Make some flags optional

[Fabio Estevam]

On Sun, May 28, 2023 at 10:27 AM Adam Ford <aford173 at gmail.com> wrote:
>
> In the event a device is connected to the samsung-dsim
> controller that doesn't support the burst-clock, the
> driver is able to get the requested pixel clock from the
> attached device or bridge.  In these instances, the
> samsung,burst-clock-frequency isn't needed, so remove
> it from the required list.
>
> The pll-clock frequency can be set by the device tree entry
> for samsung,pll-clock-frequency, but in some cases, the
> pll-clock may have the same clock rate as sclk_mipi clock.
> If they are equal, this flag is not needed since the driver
> will use the sclk_mipi rate as a fallback.
>
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
> ---
> V2:  Split from driver series.  Re-word updates for burst
> and pll-clock frequency.

Reviewed-by: Fabio Estevam <festevam at gmail.com>