[PATCH V2 1/2] drm/bridge: adv7511: Allow IRQ to share GPIO pins

[Adam Ford]

On Tue, Mar 5, 2024 at 2:18 AM Laurent Pinchart
<laurent.pinchart at ideasonboard.com> wrote:
>
> Hello Adam,
>
> Thank you for the patch.
>
> On Mon, Mar 04, 2024 at 06:48:57PM -0600, Adam Ford wrote:
> > The IRQ registration currently assumes that the GPIO is dedicated
> > to it, but that may not necessarily be the case. If the board has
> > another device sharing the GPIO, it won't be registered and the
> > hot-plug detect fails to function.
> >
> > Currently, the handler reads two registers and blindly
> > assumes one of them caused the interrupt and returns IRQ_HANDLED
> > unless there is an error. In order to properly do this, the IRQ
> > handler needs to check if it needs to handle the IRQ and return
> > IRQ_NONE if there is nothing to handle.  With the check added
> > and the return code properly indicating whether or not it there
> > was an IRQ, the IRQF_SHARED can be set to share a GPIO IRQ.
> >
> > Signed-off-by: Adam Ford <aford173 at gmail.com>
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>


Gentle nudge on this one.   It's been about a month, and without it,
it is preventing hot-plug detection on one board for me.

Thanks

adam

>
> > ---
> > V2:  Add check to see if there is IRQ data to handle
> >
> > diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > index b5518ff97165..f3b4616a8fb6 100644
> > --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > @@ -477,6 +477,11 @@ static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd)
> >       if (ret < 0)
> >               return ret;
> >
> > +     /* If there is no IRQ to handle, exit indicating no IRQ data */
> > +     if (!(irq0 & (ADV7511_INT0_HPD | ADV7511_INT0_EDID_READY)) &&
> > +         !(irq1 & ADV7511_INT1_DDC_ERROR))
> > +             return -ENODATA;
> > +
> >       regmap_write(adv7511->regmap, ADV7511_REG_INT(0), irq0);
> >       regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1);
> >
> > @@ -1318,7 +1323,8 @@ static int adv7511_probe(struct i2c_client *i2c)
> >
> >               ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
> >                                               adv7511_irq_handler,
> > -                                             IRQF_ONESHOT, dev_name(dev),
> > +                                             IRQF_ONESHOT | IRQF_SHARED,
> > +                                             dev_name(dev),
> >                                               adv7511);
> >               if (ret)
> >                       goto err_unregister_audio;
>
> --
> Regards,
>
> Laurent Pinchart