[PATCH v3 03/18] ASoC: dt-bindings: mt6357: Add audio codec document

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Tue Apr 9 15:55:42 UTC 2024


On 09/04/2024 15:42, Alexandre Mergnat wrote:
> Add MT8365 audio codec bindings to set required
> and optional voltage properties between the codec and the board.
> The properties are:
> - phandle of the requiered power supply.

typo

> - Setup of microphone bias voltage.
> - Setup of the speaker pin pull-down.
> 
> Signed-off-by: Alexandre Mergnat <amergnat at baylibre.com>
> ---
>  .../devicetree/bindings/sound/mt6357.yaml          | 54 ++++++++++++++++++++++

Filename using compatible syntax, so missing vendor prefix.

>  1 file changed, 54 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/mt6357.yaml b/Documentation/devicetree/bindings/sound/mt6357.yaml
> new file mode 100644
> index 000000000000..381cb71b959f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/mt6357.yaml
> @@ -0,0 +1,54 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/mt6357.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek MT6357 Codec
> +
> +maintainers:
> +  - Alexandre Mergnat <amergnat at baylibre.com>
> +
> +description: |

Do not need '|' unless you need to preserve formatting.

> +  This is the required and optional voltage properties for this subdevice.
> +  The communication between MT6357 and SoC is through Mediatek PMIC wrapper.
> +  For more detail, please visit Mediatek PMIC wrapper documentation.
> +  Must be a child node of PMIC wrapper.

Why?

> +
> +properties:
> +

Drop blank line

> +  mediatek,hp-pull-down:
> +    description:
> +      Earphone driver positive output stage short to
> +      the audio reference ground.
> +    type: boolean
> +
> +  mediatek,micbias0-microvolt:
> +    description: Selects MIC Bias 0 output voltage.
> +    enum: [1700000, 1800000, 1900000, 2000000,
> +           2100000, 2500000, 2600000, 2700000]
> +    default: 1700000
> +
> +  mediatek,micbias1-microvolt:
> +    description: Selects MIC Bias 1 output voltage.
> +    enum: [1700000, 1800000, 1900000, 2000000,
> +           2100000, 2500000, 2600000, 2700000]
> +    default: 1700000
> +
> +  mediatek,vaud28-supply:
> +    description: 2.8 volt supply phandle for the audio codec

Supplies go without vendor prefixes.

> +
> +required:
> +  - mediatek,vaud28-supply

That's basically no-op schema. I do not understand what you are trying
to achieve here.


> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    codec {
> +        mediatek,micbias0-microvolt = <1900000>;
> +        mediatek,micbias1-microvolt = <1700000>;
> +        mediatek,vaud28-supply = <&mt6357_vaud28_reg>;

Sorry, this does not work. Change voltage to 1111111 and check the results.

Best regards,
Krzysztof



More information about the dri-devel mailing list