[PATCH v3 03/18] ASoC: dt-bindings: mt6357: Add audio codec document

Alexandre Mergnat amergnat at baylibre.com
Tue Apr 23 17:07:41 UTC 2024



On 09/04/2024 17:55, Krzysztof Kozlowski wrote:
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    codec {
>> +        mediatek,micbias0-microvolt = <1900000>;
>> +        mediatek,micbias1-microvolt = <1700000>;
>> +        mediatek,vaud28-supply = <&mt6357_vaud28_reg>;
> Sorry, this does not work. Change voltage to 1111111 and check the results.

Actually it's worst ! I've removed the required property (vaud28-supply) but the dt check pass.
Same behavior for some other docs like mt6359.yaml

The at24.yaml doc works as expected, then I tried compare an find the issue, without success...

I've replaced "codec" by "audio-codec", according to [1].
I've tried multiple manner to implement the example code, without success. I'm wondering if what I 
try to do is the correct way or parse-able by the dt_check.

If I drop this file and implement all these new properties into the MFD PMIC documentation directly, 
I've the expected dt_check result (function to good or wrong parameters)


+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml
@@ -37,9 +37,32 @@ properties:
    "#interrupt-cells":
      const: 2

-  codec:
+  audio-codec:
      type: object
-    $ref: /schemas/sound/mt6357.yaml
+    properties:
+      vaud28-supply:
+        description: 2.8 volt supply phandle for the audio codec
+
+      mediatek,hp-pull-down:
+        description:
+          Earphone driver positive output stage short to
+          the audio reference ground.
+        type: boolean
+
+      mediatek,micbias0-microvolt:
+        description: Selects MIC Bias 0 output voltage.
+        enum: [1700000, 1800000, 1900000, 2000000,
+               2100000, 2500000, 2600000, 2700000]
+        default: 1700000
+
+      mediatek,micbias1-microvolt:
+        description: Selects MIC Bias 1 output voltage.
+        enum: [1700000, 1800000, 1900000, 2000000,
+               2100000, 2500000, 2600000, 2700000]
+        default: 1700000
+
+    required:
+      - vaud28-supply
      unevaluatedProperties: false

    regulators:
@@ -88,6 +111,12 @@ examples:
              interrupt-controller;
              #interrupt-cells = <2>;

+            audio-codec {
+                mediatek,micbias0-microvolt = <1700000>;
+                mediatek,micbias1-microvolt = <1700000>;
+                vaud28-supply = <&mt6357_vaud28_reg>;
+            };
+
              regulators {


Is the implementation above looks good for you ?


[1] 
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

-- 
Regards,
Alexandre


More information about the dri-devel mailing list