[PATCH RESEND, v6 6/8] mailbox: mediatek: Add CMDQ secure mailbox driver
CK Hu (胡俊光)
ck.hu at mediatek.com
Mon Jun 17 07:18:21 UTC 2024
Hi, Jason:
On Sun, 2024-05-26 at 22:44 +0800, Jason-JH.Lin wrote:
> To support secure video path feature, GCE have to read/write registgers
> in the secure world. GCE will enable the secure access permission to the
> HW who wants to access the secure content buffer.
>
> Add CMDQ secure mailbox driver to make CMDQ client user is able to
> sending their HW settings to the secure world. So that GCE can execute
> all instructions to configure HW in the secure world.
>
> TODO:
> 1. Squash cmdq_sec_task_exec_work() into cmdq_sec_mbox_send_data().
> 2. Call into TEE to query cookie instead of using shared memory in
> cmdq_sec_get_cookie().
> 3. Register shared memory as command buffer instead of copying normal
> command buffer to IWC shared memory.
> 4. Use SOFTDEP to make cmdq_sec_probe later than OPTEE loaded and then
> move cmdq_sec_session_init into cmdq_sec_probe().
> 5. Remove timeout detection in cmdq_sec_session_send().
>
> Signed-off-by: Jason-JH.Lin <jason-jh.lin at mediatek.com>
> Signed-off-by: Hsiao Chien Sung <shawn.sung at mediatek.com>
> ---
[snip]
> +static int cmdq_sec_irq_notify_start(struct cmdq_sec *cmdq)
> +{
> + int err;
> + dma_addr_t dma_addr;
> + u64 *inst = NULL;
> +
> + if (cmdq->notify_run)
> + return 0;
> +
> + cmdq->notify_clt.dev = cmdq->pdata->mbox->dev;
> + cmdq->notify_clt.rx_callback = cmdq_sec_irq_notify_callback;
> + cmdq->notify_clt.tx_block = false;
> + cmdq->notify_clt.knows_txdone = true;
> + cmdq->notify_chan = mbox_request_channel(&cmdq->notify_clt, 0);
When playing secure video, video decoder driver would have interrupt both in normal world and secure world [1].
I guess cmdq driver could also have both interrupt in normal world and secure world.
If so, it's not necessary to create a channel to wait SW token.
[1] https://patchwork.kernel.org/project/linux-mediatek/patch/20240516122102.16379-20-yunfei.dong@mediatek.com/
Regards,
CK
> + if (IS_ERR(cmdq->notify_chan)) {
> + dev_err(&cmdq->dev, "failed to request channel\n");
> + return -ENODEV;
> + }
> +
> + cmdq->clt_pkt.va_base = kzalloc(PAGE_SIZE, GFP_KERNEL);
> + if (!cmdq->clt_pkt.va_base)
> + return -ENOMEM;
> +
> + cmdq->clt_pkt.buf_size = PAGE_SIZE;
> +
> + dma_addr = dma_map_single(cmdq->pdata->mbox->dev, cmdq->clt_pkt.va_base,
> + cmdq->clt_pkt.buf_size, DMA_TO_DEVICE);
> + if (dma_mapping_error(cmdq->pdata->mbox->dev, dma_addr)) {
> + dev_err(cmdq->pdata->mbox->dev, "dma map failed, size=%lu\n", PAGE_SIZE);
> + kfree(cmdq->clt_pkt.va_base);
> + return -ENOMEM;
> + }
> + cmdq->clt_pkt.pa_base = dma_addr;
> +
> + INIT_WORK(&cmdq->irq_notify_work, cmdq_sec_irq_notify_work);
> +
> + /* generate irq notify loop command */
> + inst = (u64 *)cmdq->clt_pkt.va_base;
> + *inst = CMDQ_WFE_CMD(cmdq->pdata->cmdq_event);
> + inst++;
> + *inst = CMDQ_EOC_CMD;
> + inst++;
> + *inst = CMDQ_JUMP_CMD(cmdq->clt_pkt.pa_base, cmdq->pdata->shift);
> + inst++;
> + cmdq->clt_pkt.cmd_buf_size += CMDQ_INST_SIZE * 3;
> + cmdq->clt_pkt.loop = true;
> +
> + dma_sync_single_for_device(cmdq->pdata->mbox->dev,
> + cmdq->clt_pkt.pa_base,
> + cmdq->clt_pkt.cmd_buf_size,
> + DMA_TO_DEVICE);
> + err = mbox_send_message(cmdq->notify_chan, &cmdq->clt_pkt);
> + mbox_client_txdone(cmdq->notify_chan, 0);
> + if (err < 0) {
> + dev_err(&cmdq->dev, "%s failed:%d", __func__, err);
> + dma_unmap_single(cmdq->pdata->mbox->dev, cmdq->clt_pkt.pa_base,
> + cmdq->clt_pkt.buf_size, DMA_TO_DEVICE);
> + kfree(cmdq->clt_pkt.va_base);
> + mbox_free_channel(cmdq->notify_chan);
> +
> + return err;
> + }
> +
> + cmdq->notify_run = true;
> + dev_dbg(&cmdq->dev, "%s success!", __func__);
> +
> + return 0;
> +}
> +
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20240617/5b3c47e0/attachment.htm>
More information about the dri-devel
mailing list