[PATCH 3/4] drm/panel: simple: Convert Innolux G121X1-L03 to display_timing
Marek Vasut
marex at denx.de
Thu Mar 28 10:27:37 UTC 2024
Use display_timing instead of drm_display_mode to define a range of
possible display timings supported by this panel. This makes the panel
support more flexible and improves compatibility. No functional change
is expected.
The settings are picked from documentation [1] section 6.1 INPUT SIGNAL
TIMING SPECIFICATIONS.
[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf
Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Conor Dooley <conor+dt at kernel.org>
Cc: Daniel Vetter <daniel at ffwll.ch>
Cc: David Airlie <airlied at gmail.com>
Cc: Jessica Zhang <quic_jesszhan at quicinc.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
Cc: Maxime Ripard <mripard at kernel.org>
Cc: Neil Armstrong <neil.armstrong at linaro.org>
Cc: Rob Herring <robh at kernel.org>
Cc: Sam Ravnborg <sam at ravnborg.org>
Cc: Thierry Reding <thierry.reding at gmail.com>
Cc: Thomas Zimmermann <tzimmermann at suse.de>
Cc: devicetree at vger.kernel.org
Cc: dri-devel at lists.freedesktop.org
---
drivers/gpu/drm/panel/panel-simple.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index d4c30a86d15d6..737c78b3b8a23 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2592,22 +2592,22 @@ static const struct panel_desc innolux_g121i1_l01 = {
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
-static const struct drm_display_mode innolux_g121x1_l03_mode = {
- .clock = 65000,
- .hdisplay = 1024,
- .hsync_start = 1024 + 0,
- .hsync_end = 1024 + 1,
- .htotal = 1024 + 0 + 1 + 320,
- .vdisplay = 768,
- .vsync_start = 768 + 38,
- .vsync_end = 768 + 38 + 1,
- .vtotal = 768 + 38 + 1 + 0,
- .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+static const struct display_timing innolux_g121x1_l03_timings = {
+ .pixelclock = { 57500000, 64900000, 74400000 },
+ .hactive = { 1024, 1024, 1024 },
+ .hfront_porch = { 90, 140, 190 },
+ .hback_porch = { 90, 140, 190 },
+ .hsync_len = { 36, 40, 60 },
+ .vactive = { 768, 768, 768 },
+ .vfront_porch = { 2, 15, 30 },
+ .vback_porch = { 2, 15, 30 },
+ .vsync_len = { 2, 8, 20 },
+ .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
};
static const struct panel_desc innolux_g121x1_l03 = {
- .modes = &innolux_g121x1_l03_mode,
- .num_modes = 1,
+ .timings = &innolux_g121x1_l03_timings,
+ .num_timings = 1,
.bpc = 6,
.size = {
.width = 246,
--
2.43.0
More information about the dri-devel
mailing list