[PATCH 3/4] drm/panel: simple: Convert Innolux G121X1-L03 to display_timing

Jessica Zhang quic_jesszhan at quicinc.com
Fri Mar 29 17:03:30 UTC 2024



On 3/28/2024 3:27 AM, Marek Vasut wrote:
> Use display_timing instead of drm_display_mode to define a range of
> possible display timings supported by this panel. This makes the panel
> support more flexible and improves compatibility. No functional change
> is expected.
> 
> The settings are picked from documentation [1] section 6.1 INPUT SIGNAL
> TIMING SPECIFICATIONS.
> 
> [1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf

Hi Marek,

Acked-by: Jessica Zhang <quic_jesszhan at quicinc.com>

Thanks,

Jessica Zhang

> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
> Cc: Conor Dooley <conor+dt at kernel.org>
> Cc: Daniel Vetter <daniel at ffwll.ch>
> Cc: David Airlie <airlied at gmail.com>
> Cc: Jessica Zhang <quic_jesszhan at quicinc.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>
> Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> Cc: Maxime Ripard <mripard at kernel.org>
> Cc: Neil Armstrong <neil.armstrong at linaro.org>
> Cc: Rob Herring <robh at kernel.org>
> Cc: Sam Ravnborg <sam at ravnborg.org>
> Cc: Thierry Reding <thierry.reding at gmail.com>
> Cc: Thomas Zimmermann <tzimmermann at suse.de>
> Cc: devicetree at vger.kernel.org
> Cc: dri-devel at lists.freedesktop.org
> ---
>   drivers/gpu/drm/panel/panel-simple.c | 26 +++++++++++++-------------
>   1 file changed, 13 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index d4c30a86d15d6..737c78b3b8a23 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -2592,22 +2592,22 @@ static const struct panel_desc innolux_g121i1_l01 = {
>   	.connector_type = DRM_MODE_CONNECTOR_LVDS,
>   };
>   
> -static const struct drm_display_mode innolux_g121x1_l03_mode = {
> -	.clock = 65000,
> -	.hdisplay = 1024,
> -	.hsync_start = 1024 + 0,
> -	.hsync_end = 1024 + 1,
> -	.htotal = 1024 + 0 + 1 + 320,
> -	.vdisplay = 768,
> -	.vsync_start = 768 + 38,
> -	.vsync_end = 768 + 38 + 1,
> -	.vtotal = 768 + 38 + 1 + 0,
> -	.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> +static const struct display_timing innolux_g121x1_l03_timings = {
> +	.pixelclock = { 57500000, 64900000, 74400000 },
> +	.hactive = { 1024, 1024, 1024 },
> +	.hfront_porch = { 90, 140, 190 },
> +	.hback_porch = { 90, 140, 190 },
> +	.hsync_len = { 36, 40, 60 },
> +	.vactive = { 768, 768, 768 },
> +	.vfront_porch = { 2, 15, 30 },
> +	.vback_porch = { 2, 15, 30 },
> +	.vsync_len = { 2, 8, 20 },
> +	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
>   };
>   
>   static const struct panel_desc innolux_g121x1_l03 = {
> -	.modes = &innolux_g121x1_l03_mode,
> -	.num_modes = 1,
> +	.timings = &innolux_g121x1_l03_timings,
> +	.num_timings = 1,
>   	.bpc = 6,
>   	.size = {
>   		.width = 246,
> -- 
> 2.43.0
> 


More information about the dri-devel mailing list